Instrukcja obsługi Cuisinart DLC-6

Cuisinart Robot kuchenny DLC-6

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cuisinart DLC-6 (17 stron) w kategorii Robot kuchenny. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/17
INSTRUCTION BOOKLET
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Food Prep Series 8-Cup Food Processor
DLC-6
2
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains Cuisinart® Food
Prep Series 8-Cup Food Processor and
the accessories for it:
8-cup work bowl, work bowl cover, metal
chopping/mixing blade, thin reversible
metal slicing and shredding disc, thick re-
versible metal slicing and shredding disc,
base with stem adapter, and instruction/
recipe book.
CAUTION:
THE CUTTING TOOLS HAVE VERY
SHARP EDGES. To avoid injury when
unpacking the parts, please follow these
instructions.
1. Place the box on a low table or on the
oor next to the kitchen counter where
you intend to keep the food processor.
Be sure the box is right side up.
2. Open top aps–there will be a rectan-
gular block of packaging material that
holds the processor parts, each tted
into a cavity.
3. Remove the instruction/recipe book and
the metal slicing and shredding discs
from one side.
4. Lift out the packing material.
5. Remove the base and bowl together by
grasping the handle and lifting straight
up. Do not rotate the bowl, as this may
cause the bowl to separate from the
base.
6. Place the food processor on the counter
or table. Read the instructions
thoroughly before using the machine.
7. Save the shipping cartons and packing
material. You will nd them very useful
if you need to repack the processor for
moving or other shipment.
We recommend that you visit our website,
www.cuisinart.com for a fast, efficient way
to complete your product registration.
CONTENTS
Unpacking Instructions ............................ 2
Technical Data .......................................... 2
Important Safeguards ............................... 3
Introduction .............................................. 4
Assembly Instructions .............................. 4
Operating Instructions and Use ............... 5
Tips For Easy Use .................................... 5
Cleaning and Storage ............................... 7
For Your Safety ........................................ 7
Recipes ..................................................... 8
Warranty ................................................ 15
CAREFULLY
READ ALL
INSTRUCTIONS
BEFORE USING
THIS APPLIANCE.
TECHNICAL DATA
The motor in your food processor operates
on standard line operating current. The
appropriate voltage and frequency for your
machine are shown on the lower housing
under the base.
An automatic, temperature-controlled
circuit breaker in the motor ensures
complete protection against motor burn-
out. If the processor runs for an excep-
tionally long time when chopping, mixing
or kneading a thick or heavy mixture in
successive batches, the motor may over-
heat. If this happens, the processor will
stop. Turn it off and wait for the motor to
cool before proceeding. It will usually cool
within 10 minutes. In extreme cases,
cooling could take an hour.
Safety switches prevent the machine from
operating when the work bowl or the cover
is not locked into position. The motor
stops within seconds when it has been
turned off, and a fast-stop circuit stops it
instantly when the pusher assembly
is removed.
3
IMPORTANT
SAFEGUARDS
Always follow these safety precautions
when using this appliance.
GETTING READY
1. Read all instructions.
2. Blades are sharp. Handle them
carefully.
3. Always unplug from outlet when not
in use, before putting on or taking off
parts, before removing food and before
cleaning. To unplug, grasp plug and pull
from electrical outlet. Never pull cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table
or counter, or touch hot surfaces.
6. Do not operate any appliance with
damaged cord or plug, or after appli-
ance has been dropped or damaged
in any way. Return appliance to the
nearest authorized service facility for
examination, repair, or electrical or
mechanical adjustment.
OPERATION
1. Keep hands as well as spatulas and
other utensils away from moving blades
or discs while processing food, to pre-
vent the possibility of severe personal
injury or damage to food processor.
A plastic scraper may be used, but
only when the food processor motor is
stopped.
2. Avoid contact with moving parts. Never
push food down into feed tube by hand
when slicing or shredding. Always use
pusher.
3. Make sure motor has completely
stopped before removing cover.
4. Never store any blade or disc on motor
shaft. To reduce the risk of injury, no
blade or disc should be placed on the
shaft except when the bowl is properly
locked in place and the processor is
in use. Store blades and discs as you
would sharp knives, out of reach of
children.
5. Be sure cover and feed tube are
securely locked in place before
operating food processor.
6. Never try to override or tamper with
cover interlock mechanism.
7.
Do not operate your appliance in an
appliance garage or under a wall cabinet.
When storing in an appliance garage,
always unplug the unit from the
electrical outlet. Not doing so could
create a risk of fire, especially if the
appliance touches the walls of the garage
or the door touches the unit as it closes.
GENERAL CLEANING
To protect against risk of electrical shock,
do not put base in water or other liquid.
1. This appliance should not be used by
or near children, or individuals with
certain disabilities.
2. Do not operate this, or any other
motor-driven appliance, while under the
in uence of alcohol or other substances
that affect your reaction time or percep-
tion.
3. This food processor is ETL listed for
household use. Use it only for food
preparation as described in the instruc-
tion book.
4. Using attachments not recommended
by the manufacturer may cause re,
electrical shock or personal injury, or
may damage your food processor.
NOTICE: This appliance has a polarized
plug (one blade is wider than the other).
As a safety feature, this plug will t in a
polarized outlet only one way. If the plug
does not t fully in the outlet, reverse the
plug. If it still does not t, contact a quali-
ed electrician. Do not attempt to defeat
this safety feature.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD
USE ONLY

Specyfikacje produktu

Marka: Cuisinart
Kategoria: Robot kuchenny
Model: DLC-6

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cuisinart DLC-6, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Robot kuchenny Cuisinart

Cuisinart

Cuisinart FP-14DC Instrukcja

12 Stycznia 2025
Cuisinart

Cuisinart Mini-Prep Plus DLC-2AFR Instrukcja

12 Stycznia 2025
Cuisinart

Cuisinart Core Custom MFP-WB4 Instrukcja

7 Stycznia 2025
Cuisinart

Cuisinart CCH-3 Instrukcja

7 Października 2024
Cuisinart

Cuisinart Core Custom MFD-4 Instrukcja

3 Października 2024
Cuisinart

Cuisinart Continuous Feed CFA-10 Instrukcja

28 Września 2024
Cuisinart

Cuisinart FP-7 Instrukcja

26 Września 2024
Cuisinart

Cuisinart FP-9 Instrukcja

26 Września 2024
Cuisinart

Cuisinart CBT700E Instrukcja

22 Września 2024
Cuisinart

Cuisinart DFP-14CPY Instrukcja

21 Września 2024

Instrukcje Robot kuchenny

Najnowsze instrukcje dla Robot kuchenny

Bredeco

Bredeco BCPM-1200R Instrukcja

15 Stycznia 2025
Breville

Breville Kinetix Wizz BFP450 Instrukcja

14 Stycznia 2025
Create

Create CHEF CHOP Instrukcja

14 Stycznia 2025
Bredeco

Bredeco BCPM-1200-EXP Instrukcja

14 Stycznia 2025
Clatronic

Clatronic KM 3350 Instrukcja

12 Stycznia 2025
Kenwood

Kenwood kMix KMX97 Instrukcja

12 Stycznia 2025
Gorenje

Gorenje S450XE Instrukcja

12 Stycznia 2025
Kenwood

Kenwood Chef Elite XL KVL6330S Instrukcja

11 Stycznia 2025
Primo

Primo SB1 Instrukcja

11 Stycznia 2025
TurboTronic

TurboTronic Samurai TT-MG10 Instrukcja

9 Stycznia 2025