Instrukcja obsługi Cuisinart CompleteChef FPC-100

Cuisinart Robot kuchenny CompleteChef FPC-100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cuisinart CompleteChef FPC-100 (84 stron) w kategorii Robot kuchenny. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/84
Cuisinart® CompleteChef™ Cooking Food Processor FPC-100
For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
INSTRUCTION
BOOKLET
2
IMPORTANT
UNPACKING
INSTRUCTIONS
This package contains a Cuisinart
®
CompleteChef™ Cooking Food Processor
and accessories:
Motor Housing Base, Stainless Steel Work
Bowl, Cooking Lid, Food Processor Lid with 3
Pushers & interlock, Accessory Storage Case,
Dicing Kit, Spatula and Instruction Book.
CAUTION: THE CUTTING TOOLS HAVE
VERY SHARP EDGES.
To avoid injury when unpacking the parts,
please follow these instructions.
1. Place the box on a low table or on the floor
next to the kitchen counter where you
intend to keep the Cooking Food Processor.
Be sure the box is right-side up.
2. Open top flaps – there will be a rectangular
block of packing material that holds the
processor parts, each fitted into a cavity.
3. Remove the Spatula/Instruction Book.
4. Lift out the first layer of packing material.
5. Remove the Stainless Steel Bowl, Food
Processor Lid and Dicing Kit and place
them on the counter or table.
6. Lift out the second layer of packing
material.
7. Remove the Accessory Storage Case and
Motor Housing Base and place them on
the counter or table.
8. Assemble the Stainless Steel Work Bowl
on the Base by grasping bowl handles and
guiding it down into the locked position.
9. Always read the Instruction Booklet
thoroughly before using your Cooking
Food Processor.
10. When ready to use your machine, select
the suitable lid, unlock the Accessory
Storage Case, lift the cover and remove the
clamshell, the Chopping Blade, Dough
Blade, Stirring Paddle, Whisk, Stem Adapter,
Adjustable Slicing Disc, and Reversible
Shredding Disc from each cavity.
CAREFULLY REMOVE THE METAL
CHOPPING BLADE BY GRASPING
THE CENTER HUB AND LIFTING IT
STRAIGHT UP. NEVER TOUCH THE
BLADES, AS THEY ARE RAZOR SHARP.
CAREFULLY REMOVE THE ADJUSTABLE
SLICING DISC BY USING THE PLASTIC
HUB. DO NOT TOUCH THE BLADE,
AS IT IS VERY SHARP.
Carefully remove the Slicing Disc and
Shredding Disc by holding the plastic hub.
Remember to lock the parts in the Storage
Case when not in use.
11. To use the Dicing Kit, unlock the Dicing
Case, lift the cover and remove the
clamshell to access the dicing Cutting
Disc, Dicing Grid and Cleaning Tool.
CAREFULLY REMOVE THE DICING
CUTTING DISC BY USING THE PLASTIC
HUB. DO NOT TOUCH THE BLADE,
AS IT IS VERY SHARP.
12. Save the shipping cartons and plastic foam
blocks. You will find them very useful if you
need to repack the processor for moving or
other shipment.
NOTE: We recommend that you visit our
website, www.cuisinart.com for a fast, efficient
way to complete your product registration.
3
IMPORTANT
SAFEGUARDS
Always follow these safety precautions when
using this appliance.
Getting Ready
1. Read all instructions.
2. Blades and discs are sharp. Handle them
carefully.
3. Turn the appliance OFF, then unplug from
the outlet when not in use, before assembling
or disassembling parts and before cleaning.
To unplug, grasp the plug and pull from the
outlet. Never pull from the power cord.
4. Do not use outdoors.
5. Do not let cord hang over edge of table or
counter, or touch hot surfaces.
6. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions,
or is dropped or damaged in any manner.
Contact the manufacturer at their customer
service telephone number for information on
examination, repair, or adjustment.
Operation
1. Keep hands, as well as spatulas and other
utensils, away from moving blades or discs
while processing food to prevent the possibility
of severe personal injury or damage to food
processor. A plastic scraper may be used,
but only when the food processor motor
is stopped.
2. Avoid coming into contact with moving parts.
Never push food down by hand when slicing
or shredding. Always use pusher.
3. Make sure motor has completely stopped
before removing cover. (If machine does not
stop within 4 seconds after you remove the
bowl cover assembly, call 1-800-762-0190
for assistance. Do not use the machine.)
4. Never store any blade or disc on motor shaft.
To reduce the risk of injury, no blade or disc
should be placed on the shaft except when
the bowl is properly locked in place and the
processor is in use. Store blades and discs out
of reach of children.
5. Be sure cover is securely locked in place before
operating food processor.
6. Never try to override or tamper with cover
interlock mechanism.
7. Do not touch hot surfaces. Use handles or knobs.
8. Extreme caution must be used when moving
an appliance containing hot oil or other hot
liquids.
9. Never feed food by hand. Always use food
pusher.
Cleaning
To protect against risk of electric shock,
do not put base in water or other liquids.
Unplug from outlet when not in use and
before cleaning. Allow to cool before putting
on or taking off parts.
General
1. This appliance is not intended for use by
persons (including children) with reduced
physical, sensory, or mental capabilities, or
lack of experience and knowledge, unless
they are closely supervised and instructed
concerning use of the appliance by a person
responsible for their safety. Close supervision
is necessary when any appliance is used by or
near children. Children should be supervised to
ensure that they do not play with the appliance.
2. Do not operate this, or any other motor-driven
appliance, while under the influence of alcohol
or other substances that affect your reaction
time or perception.
3.
This food processor is UL listed for household
use.
Use it only for food preparation or cooking as
described in the accompanying recipes and
instruction book. Do not use this appliance for
anything but its intended use.
4. The use of attachments not recommended
or sold by Cuisinart may cause fire, electric
shock or personal injury, or damage to your
food processor.
5. To avoid possible malfunction of work bowl
switch, never store processor with cover
assembly in locked position.
6. Maximum rating of 1550 watts is based
on the cooking and stirring functions,
which draw the greatest current.
Other recommended attachments may
draw significantly less current.
7. Do not operate your appliance in an appliance
garage or under a wall cabinet. When storing
in an appliance garage, always unplug the
unit from the electrical outlet. Not doing
so could create a risk of fire, especially if the
appliance touches the walls of the garage or
the door touches the unit as it closes.
NOTICE: Do not fill the bowl above the
marked maximum fill line (or rated capacity)

Specyfikacje produktu

Marka: Cuisinart
Kategoria: Robot kuchenny
Model: CompleteChef FPC-100

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cuisinart CompleteChef FPC-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Robot kuchenny Cuisinart

Cuisinart

Cuisinart FP-14DC Instrukcja

12 Stycznia 2025
Cuisinart

Cuisinart Mini-Prep Plus DLC-2AFR Instrukcja

12 Stycznia 2025
Cuisinart

Cuisinart Core Custom MFP-WB4 Instrukcja

7 Stycznia 2025
Cuisinart

Cuisinart CCH-3 Instrukcja

7 Października 2024
Cuisinart

Cuisinart Core Custom MFD-4 Instrukcja

3 Października 2024
Cuisinart

Cuisinart Continuous Feed CFA-10 Instrukcja

28 Września 2024
Cuisinart

Cuisinart FP-7 Instrukcja

26 Września 2024
Cuisinart

Cuisinart FP-9 Instrukcja

26 Września 2024
Cuisinart

Cuisinart CBT700E Instrukcja

22 Września 2024
Cuisinart

Cuisinart DFP-14CPY Instrukcja

21 Września 2024

Instrukcje Robot kuchenny

Najnowsze instrukcje dla Robot kuchenny

Bredeco

Bredeco BCPM-1200R Instrukcja

15 Stycznia 2025
Breville

Breville Kinetix Wizz BFP450 Instrukcja

14 Stycznia 2025
Create

Create CHEF CHOP Instrukcja

14 Stycznia 2025
Bredeco

Bredeco BCPM-1200-EXP Instrukcja

14 Stycznia 2025
Clatronic

Clatronic KM 3350 Instrukcja

12 Stycznia 2025
Kenwood

Kenwood kMix KMX97 Instrukcja

12 Stycznia 2025
Gorenje

Gorenje S450XE Instrukcja

12 Stycznia 2025
Kenwood

Kenwood Chef Elite XL KVL6330S Instrukcja

11 Stycznia 2025
Primo

Primo SB1 Instrukcja

11 Stycznia 2025
TurboTronic

TurboTronic Samurai TT-MG10 Instrukcja

9 Stycznia 2025