Instrukcja obs艂ugi Crunch P1-6.5C
Crunch
Autospeaker
P1-6.5C
Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Crunch P1-6.5C (10 stron) w kategorii Autospeaker. Ta instrukcja by艂a pomocna dla 4 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek
Strona 1/10
SPEAKERS
P1-6.5C / p1-653 / p1-693
Power one
CRUNCH
POWER ONE SERIES
CAR AUDIO SPEAKERS
Congratulations on your purchase of the new Power One Series
speaker system. The Power One speaker series offer superior sonic
accuracy, intense high power sound quality with exotic build
materials and outstanding good looks.
As with all high quality car audio products, we recommend
professional installation by an authorized Crunch dealer.
Your dealers knowledge and experience can ensure a problem free
and cosmetically integrated installation.
If you choose to install the speakers yourself, please read
the entire manual very carefully.
1
Impact Resistant Tweeter Elements
Neo Mylar Soft Dome Tweeter
Installation hardware Included
Silver Alpha-Cellulose Cones
Spade Speaker Terminals
Moisture Resistant Rubber Surround
High Mid-Bass Impact
Anti-Resonant Stamped Steel Basket
Wide Nominal Power Range
2
SPEAKER LOCATION AND MOUNTING TIPS
THE FIRST STEP IS THOROUGH PLANNING BEFORE THE
INSTALLATION BEGINS.
THE SPEAKER SCREW HOLE CONFIGURATION WILL WORK WITH
MOST DOMESTIC AND FOREIGN VEHICLES.
FOLLOW THESE INSTRUCTIONS CAREFULLY TO ENSURE PROPER
IMAGING AND MAXXIMUM PERFORMANCE.
Factory Speaker Replacement Location and Installation
1. Before you alter the vehicles interior materials, be sure there is
adequate room and clearance for the speaker depth to clear the
windows and other moving parts. (See speaker measurement page).
2. If you are using the speaker wires provided in this kit, be sure
to route wires through the factory door grommet as shown in the
speaker mounting diagram.
3. After securing the speaker and checking clearances, connect
the red/black speaker audio wires to the correct speaker + and -
spade terminals.
Custom Speaker Location and Installation
1. Follow steps 1-3 above.
2. Use the speaker mounting diagrams and speaker hole cut-out
dimensions on the following pages.
3. Always mount the left and right side speakers on the same plane.
This means that each speaker should be the same height from
the floor and same distance from the firewall. Do not mount one
speaker higher, lower, further forward or further behind the other.
Specyfikacje produktu
Marka: | Crunch |
Kategoria: | Autospeaker |
Model: | P1-6.5C |
Potrzebujesz pomocy?
Je艣li potrzebujesz pomocy z Crunch P1-6.5C, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮
Instrukcje Autospeaker Crunch
28 Sierpnia 2024
8 Sierpnia 2024
5 Lipca 2024
Instrukcje Autospeaker
- Autospeaker Sony
- Autospeaker Pioneer
- Autospeaker JBL
- Autospeaker Boss
- Autospeaker Blaupunkt
- Autospeaker Kenwood
- Autospeaker Alpine
- Autospeaker Auna
- Autospeaker Fusion
- Autospeaker Magnat
- Autospeaker Pyle
- Autospeaker JL Audio
- Autospeaker Hifonics
- Autospeaker Focal
- Autospeaker Kicker
- Autospeaker Mac Audio
- Autospeaker Hertz
- Autospeaker Caliber
- Autospeaker Autotek
- Autospeaker Lanzar
- Autospeaker Dnt
- Autospeaker Mtx Audio
Najnowsze instrukcje dla Autospeaker
19 Wrze艣nia 2024
18 Wrze艣nia 2024
18 Wrze艣nia 2024
18 Wrze艣nia 2024
18 Wrze艣nia 2024
17 Wrze艣nia 2024
16 Wrze艣nia 2024
16 Wrze艣nia 2024
16 Wrze艣nia 2024
15 Wrze艣nia 2024