Instrukcja obsługi Crunch GRP62CX
Crunch
Autospeaker
GRP62CX
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crunch GRP62CX (9 stron) w kategorii Autospeaker. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
FULL RANGE
CRUNCH GROUND POUNDER
SERIES
CAR AUDIO SPEAKERS
Congratulations on your purchase of the new Crunch GRP Ground
Pounder Series speaker system. The GRP speaker series offer
superior sonic accuracy, intense high power sound quality with
exotic build materials and outstanding good looks.
As with all high quality car audio products, we recommend
professional installation by an authorised Crunch dealer.
Your dealers knowledge and experience can ensure a problem free
and cosmetically integrated installation.
If you choose to install the speakers yourself, please read
the entire manual very carefully.
1
Impact Resistant Tweeter Elements
Neo Mylar Soft Dome Tweeter
Installation hardware Included
External 12dB Passive In-Line Crossover
Raised T-Yoke
Silver Alpha-Cellulose Cones
Tight-Fit Insert Speaker Terminals
Moisture Resistant Rubber Surround
High Mid-Bass Impact
Anti-Resonant Stamped Steel Basket
Wide Nominal Power Range
2
SPEAKER LOCATION AND MOUNTING TIPS
THE FIRST STEP IS THOROUGH PLANNING BEFORE THE
INSTALLATION BEGINS.
THE SPEAKER SCREW HOLE CONFIGURATION WILL WORK WITH
MOST DOMESTIC AND FOREIGN VEHICLES.
FOLLOW THESE INSTRUCTIONS CAREFULLY TO ENSURE PROPER
IMAGING AND MAXXIMUM PERFORMANCE.
Factory Speaker Replacement Location and Installation
1. Before you alter the vehicles interior materials, be sure there is
adequate room and clearance for the speaker depth to clear the
windows and other moving parts. (See speaker measurement page).
2. If you are using the speaker wires provided in this kit, be sure
to route wires through the factory door grommet as shown in the
speaker mounting diagram.
3. After securing the speaker and checking clearances, connect
the red/black speaker audio wires to the correct speaker + and -
spade terminals.
Custom Speaker Location and Installation
1. Follow steps 1-5 above.
2. Use the speaker mounting diagrams and speaker hole cut-out
dimensions on the following pages.
3. Always mount the left and right side speakers on the same plane.
This means that each speaker should be the same height from
the floor and same distance from the firewall. Do not mount one
speaker higher, lower, further forward or further behind the other.
3. It is always best to keep the tweeter (component speakers) as close
to the mid range driver as possible. Typically with-in 12”.
The tweeters tend to sound best when aimed towards the rear center
of the vehicle.
Specyfikacje produktu
Marka: | Crunch |
Kategoria: | Autospeaker |
Model: | GRP62CX |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Crunch GRP62CX, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Autospeaker Crunch
28 Sierpnia 2024
8 Sierpnia 2024
5 Lipca 2024
Instrukcje Autospeaker
- Autospeaker Sony
- Autospeaker Pioneer
- Autospeaker JBL
- Autospeaker Boss
- Autospeaker Blaupunkt
- Autospeaker Kenwood
- Autospeaker Alpine
- Autospeaker Auna
- Autospeaker Fusion
- Autospeaker Magnat
- Autospeaker Pyle
- Autospeaker JL Audio
- Autospeaker Hifonics
- Autospeaker Focal
- Autospeaker Kicker
- Autospeaker Mac Audio
- Autospeaker Hertz
- Autospeaker Caliber
- Autospeaker Autotek
- Autospeaker Lanzar
- Autospeaker Dnt
- Autospeaker Mtx Audio
Najnowsze instrukcje dla Autospeaker
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
16 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024