Instrukcja obsługi Crestron TSW-770/1070-MUMK

Crestron System wideokonferencji TSW-770/1070-MUMK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron TSW-770/1070-MUMK (8 stron) w kategorii System wideokonferencji. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
The Crestron® is a mullion mount kit that is usedTSW-770/1070-MUMK
to attach a TSW-770 orTSW-1070 touch screen to the mullion of an
interior glass wall, window, or partition. The MUMK mounts the touch
screen to the left or right of any hollow, metallic vertical mullion, and
two mounting brackets are provided that allow the MUMK to be
installed in one of two configurations (side mount or front mount).
Wiring is run to the touch screen from inside the mullion.
In
In
In
InIn the
the
the
thethe Box
Box
Box
BoxBox
1 TSW-770/1070-MUMK, Mullion Mount Kit
Additional
Additional
Additional
AdditionalAdditional Items
Items
Items
ItemsItems
1 Bracket, Mullion, Front Mount (2053274)
1 Bracket, Mullion, Side Mount (2053273)
2 Jacknut, 6-32 (2053371)
2 Screw, 4-40 x1/4 in., Undercut Head, Phillips (2007152)
4 Screw, 4-40 x1/2 in., Undercut Head, Phillips (2007174)
4 Screw, 4-40 x3/4 in., Flat Head, Phillips (2029110)
2 Screw, 6-32 x3/8 in., Socket Head(2007230)
2 Screw, 6-32 x7/17 in., Pan Head, Phillips(2007236)
2 Screw, 6-32 x 1/2 in., Flat Head. Phillips (2007241)
2 Screw, 6-32 x 1/2 in., Pan Head, Phillips (2007240)
1 Screw, 6-32 x1 in., Truss Head, Combo (2054883)
2 Spacer, 06 (2007095)
1 Template, Mullion Cutout (4529900)
1 Tool, 7/64 in. Allen Wrench (2021068)
1 Tool, 4 in. Jacknut Wrench (2053373)
TSW-770/1070-MUMK-B
TSW-770/1070-MUMK-B
TSW-770/1070-MUMK-B
TSW-770/1070-MUMK-BTSW-770/1070-MUMK-B Only
Only
Only
OnlyOnly
1 Corner Cap, Mullion, Front Mount, Black (4530126)
1 Mount, Mullion, with Magnets, Black (4529894)
1 Panel Cover, Mullion, Black (2055338)
TSW-770/1070-MUMK-WOnly
TSW-770/1070-MUMK-WOnly
TSW-770/1070-MUMK-WOnly
TSW-770/1070-MUMK-WOnlyTSW-770/1070-MUMK-WOnly
1 Corner Cap, Mullion, Front Mount, White (4530125)
1 Mount, Mullion, with Magnets, White (4529941)
1 Panel Cover, Mullion, White (2055337)
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMKTSW-770/1070-MUMK QuickStart
Mullion
Mullion
Mullion
MullionMullion Mount
Mount
Mount
MountMount Kit
Kit
Kit
KitKit for
for
for
forfor TSW-770
TSW-770
TSW-770
TSW-770TSW-770 and
and
and
andand TSW-1070
TSW-1070
TSW-1070
TSW-1070TSW-1070
1
1
1
11
Install
Install
Install
InstallInstall the
the
the
thethe TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMKTSW-770/1070-MUMK
The TSW-770/1070-MUMKcan be installed in one of two
configurations—side mount or front mount—using the appropriate
mounting bracket. The installation procedures for both configurations
are described in the sections that follow.
Side
Side
Side
SideSide Mount
Mount
Mount
MountMount Configuration
Configuration
Configuration
ConfigurationConfiguration
To install the TSW-770/1070-MUMKin a side mount configuration:
1. Drill two 1/3 in. (8.4 mm) holes and one 1/2 in. (13 mm) center hole in
the desired location on the mullion using the included cutout
template.
NOTES:
NOTES:
NOTES:
NOTES:NOTES:
lFor a completely flush installation, align the front edge of the
mullion mount with the front of the mullion as a reference.
lThe mullion must have a minimum mounting depth of 3/4in.
(19mm). If the mullion has a shallower depth, contact Crestron
for custom installation instructions.
lThe chosen mounting location must provide sufficient length to
run the cables from their sources through the mullion and up to
the touch screen.
2. Thread the 6-32 x1 in. truss head screw through the opening in the
included jacknut wrench and into one of the jacknuts, then align the
jacknut with one of the 1/3 in. (8.4 mm) holes drilled into the mullion.
NOTE:
NOTE:
NOTE:
NOTE:NOTE:Ensure that the jacknut wrench is oriented correctly. Refer to
the machined instructional text on the jacknut wrench.
3. Rotate the jacknut wrench clockwise until the jacknut is secured to
the mullion.
4. Remove the screw and wrench from the installed jacknut and repeat
steps 2 and 3 for the other jacknut.
5. Run the Ethernet cable and USB cables (if used) up through the
mullion and out of the center routing hole.
6. Attach the side mount bracket to the jacknuts using the included
6-32x1/2in. flat head screws.
2
2
2
22
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMKTSW-770/1070-MUMK QuickStart
Mullion
Mullion
Mullion
MullionMullion Mount
Mount
Mount
MountMount Kit
Kit
Kit
KitKit for
for
for
forfor TSW-770
TSW-770
TSW-770
TSW-770TSW-770 and
and
and
andand TSW-1070
TSW-1070
TSW-1070
TSW-1070TSW-1070
7. Install the mullion mount:
a. Pull the two cover plates gently off of the top and bottom of the
mullion mount to break the magnetic hold. Refer to the illustration
below step 9 for cover plate locations.
b. Slide the mullion mount over the side mount bracket and route
any cables out of the center hole in the mount.
c. Secure the mullion mount to the bracket using the included Allen
wrench and the two 6-32 x 3/8 in. socket head screws.
8. Align the TSW-770/TSW-1070 mounting bracket (included with
touch screen) with the panel cover as shown in the illustration below,
and then secureboth to the mullion mount with the four 4-40x 1/2 in.
undercut head screws.
3
3
3
33
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMK
TSW-770/1070-MUMKTSW-770/1070-MUMK QuickStart
Mullion
Mullion
Mullion
MullionMullion Mount
Mount
Mount
MountMount Kit
Kit
Kit
KitKit for
for
for
forfor TSW-770
TSW-770
TSW-770
TSW-770TSW-770 and
and
and
andand TSW-1070
TSW-1070
TSW-1070
TSW-1070TSW-1070

Specyfikacje produktu

Marka: Crestron
Kategoria: System wideokonferencji
Model: TSW-770/1070-MUMK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crestron TSW-770/1070-MUMK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje System wideokonferencji Crestron

Crestron

Crestron UC-CAM-WMK Instrukcja

21 Grudnia 2024
Crestron

Crestron TSW-770/1070-MUMK Instrukcja

21 Grudnia 2024
Crestron

Crestron CCS-UCA-SMK Instrukcja

21 Grudnia 2024
Crestron

Crestron UC-P110-T Instrukcja

21 Września 2024

Instrukcje System wideokonferencji

Najnowsze instrukcje dla System wideokonferencji

KanDao

KanDao Meeting Pro 360 Instrukcja

26 Grudnia 2024
KanDao

KanDao Meeting Ultra Standard Instrukcja

26 Grudnia 2024
KanDao

KanDao Meeting Ultra Instrukcja

26 Grudnia 2024
Middle Atlantic

Middle Atlantic SH-BRK Instrukcja

25 Grudnia 2024
Yealink

Yealink CM50 Instrukcja

20 Grudnia 2024
Yealink

Yealink AP08 Instrukcja

20 Grudnia 2024
AVer

AVer VB370A Instrukcja

20 Grudnia 2024
ClearOne

ClearOne Unite 20 Pro Instrukcja

11 Grudnia 2024
AVer

AVer COMVBEMIC Instrukcja

11 Grudnia 2024
AVer

AVer COMFON540 Instrukcja

11 Grudnia 2024