Instrukcja obsługi Crestron MTX-3


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron MTX-3 (44 stron) w kategorii sterownik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
Crestron MTX-3
Isys 2.8 Handheld Wireless Touchpanel
Featuring infiNET EX® Technology
Operations Guide
This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
Regulatory Compliance
To satisfy RF exposure requirements, this device and its antenna must operate with a separation distance of at
least 20 centimeters from all persons and must not be colocated or operating in conjunction with any other
antenna or transmitter.
Federal Communications Commission (FCC) Compliance Statement
Operation is subject to the following two conditions:
Industry Canada (IC) Compliance Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following conditions:
(1) This device may not cause harmful interference and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the
device.
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help
As of the date of manufacture, the MTX-3 has been tested and found to comply with specifications for CE
marking and standards per EMC and Radiocommunications Compliance Labelling.
All brand names, product names and trademarks are the property of their respective owners.
©2010 Crestron Electronics, Inc.
Crestron MTX-3 Isys™ 2.8” Handheld WirelessTouchpanel
Contents
Isys™ 2.8” Handheld Wireless Touchpanel Featuring infiNET EX®
Technology: MTX-3 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................ 1
Applications.................................................................................................................4
Specifications ..............................................................................................................5
Physical Description....................................................................................................7
Setup ........................................................................................................................................ 10
Identity Code .............................................................................................................10
Battery Installation ....................................................................................................10
Power.........................................................................................................................11
Battery Calibration ....................................................................................................12
Optimizing Battery Life ............................................................................................ 12
Configuring the Touchpanel...................................................................................... 13
General Use and Safety .............................................................................................23
Recommended Cleaning............................................................................................23
Programming Software............................................................................................................ 24
Earliest Version Software Requirements for the PC ................................................. 24
Programming with Crestron SystemBuilder.............................................................. 24
Programming with SIMPL Windows ........................................................................ 24
Programming with VisionTools ................................................................................ 27
Uploading and Upgrading........................................................................................................ 32
Establishing Communication.....................................................................................32
Programs, Projects and Firmware.............................................................................. 33
Program Checks ........................................................................................................ 33
Problem Solving ......................................................................................................................34
Troubleshooting......................................................................................................... 34
Reference Documents................................................................................................ 34
Further Inquiries ........................................................................................................35
Future Updates ..........................................................................................................35
Software License Agreement...................................................................................................36
Return and Warranty Policies ..................................................................................................38
Merchandise Returns / Repair Service ...................................................................... 38
CRESTRON Limited Warranty.................................................................................38
Operations Guide – DOC. 7066B Contents
i


Specyfikacje produktu

Marka: Crestron
Kategoria: sterownik
Model: MTX-3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crestron MTX-3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje sterownik Crestron

Instrukcje sterownik

Najnowsze instrukcje dla sterownik

HQ Power

HQ Power HQDB10002 Instrukcja

2 Października 2024
AirTurn

AirTurn BT500 Instrukcja

21 Września 2024
Chauvet

Chauvet FC-W Instrukcja

16 Września 2024
Chauvet

Chauvet ShowXpress Instrukcja

16 Września 2024
Chauvet

Chauvet RFC-XL Instrukcja

16 Września 2024
Chauvet

Chauvet DMX-RT4 Instrukcja

16 Września 2024
Chauvet

Chauvet FC-T Instrukcja

16 Września 2024
Korg

Korg microKEY2-37 Instrukcja

16 Września 2024
Korg

Korg microKEY2-49 Instrukcja

16 Września 2024