Instrukcja obsługi Crestron CP3

Crestron cienki klient CP3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron CP3 (32 stron) w kategorii cienki klient. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/32

Crestron CP3 & CP3N

3-Series Control Systems

Operations Guide

This document was prepared and written by the Technical Documentation department at:

Regulatory Compliance

These products are Listed to applicable UL Standards and requirements by Underwriters Laboratories Inc.

As of the date of manufacture, the CP3 and CP3N have been tested and found to comply with specifications

for CE marking and standards per EMC and Radiocommunications Compliance Labelling.

Federal Communications Commission (FCC) Compliance Statement

CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for

compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

 Reorient or relocate the receiving antenna

 Increase the separation between the equipment and receiver

 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

 Consult the dealer or an experienced radio/TV technician for help

Industry Canada (IC) Compliance Statement

CAN ICES-3(B)/NMB-3(B)

The specific patents that cover Crestron products are listed at patents.crestron.com.

Crestron, the Crestron logo, 3-Series, 3-Series Control System, Core 3, Core 3 OS, Core 3 UI, Cresnet, Crestron Fusion, Crestron Mobile, Crestron

Mobile Pro, Crestron Toolbox, e-Control, Fusion RV, RoomView, and SystemBuilder are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Android is either a trademark or registered trademark of Google, Inc. in the United States

and/or other countries. BACnet is either trademarks or registered trademarks of American Society of Heating, Refrigerating and Air-Conditioning

Engineers, Inc. in the United States and/or other countries. iPad and iPhone are either trademarks or registered trademarks of Apple Inc. in the United

States and/or other countries. Blu-Ray Disc is either a trademark or registered trademark of the Blu-ray Disc Association (BDA) in the United States

and/or other countries. Microsoft, Internet Explorer, and Windows are either trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries. Other trademarks, registered trademarks and trade names may be used in this document to refer to either the

entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others.

Crestron CP3 & CP3N 3-Series Control Systems

Operations Guide – DOC. 7316B Contents 



 i

Contents

3-Series Control Systems: CP3 & CP3N 1

Introduction ...............................................................................................................................1

Features and Functions................................................................................................1

Specifications ..............................................................................................................4

Physical Description....................................................................................................6

Setup ........................................................................................................................................ 11

Network Wiring.........................................................................................................11

Identity Code ............................................................................................................. 11

Installation ................................................................................................................. 11

Hardware Hookup .....................................................................................................13

Additional Configuration...........................................................................................15

Programming Software............................................................................................................ 16

Software Requirements for the PC ............................................................................ 16

Programming with SystemBuilder ............................................................................16

Programming with D3 Pro.........................................................................................16

Programming with SIMPL Windows........................................................................ 17

Uploading and Upgrading........................................................................................................ 18

Establishing Communication.....................................................................................18

Control Subnet (CP3N Only) .................................................................................... 19

Programs and Firmware ............................................................................................20

Configure for Operations .........................................................................................................21

Set Date & Time........................................................................................................ 21

Online Configuration................................................................................................. 21

Problem Solving ......................................................................................................................23

Troubleshooting......................................................................................................... 23

Check Network Wiring..............................................................................................24

Reference Documents................................................................................................ 25

Further Inquiries ........................................................................................................ 25

Future Updates ..........................................................................................................26

Return and Warranty Policies ..................................................................................................27

Merchandise Returns / Repair Service ...................................................................... 27

Crestron Limited Warranty........................................................................................27

Specyfikacje produktu

Marka:	Crestron
Kategoria:	cienki klient
Model:	CP3
Kolor produktu:	Czarny
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100-240 V
Wysokość produktu:	44 mm
Szerokość produktu:	439 mm
Głębokość produktu:	167 mm
Waga produktu:	1420 g
Bluetooth:	Nie
Gniazdko wyjścia DC:	Tak
Obsługiwane typy kart pamięci:	MMC
Ilość portów Ethernet LAN (RJ-45):	1
Zakres temperatur (eksploatacja):	5 - 45 °C
Taktowanie procesora:	- GHz
Wi-Fi:	Nie
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Zintegrowany czytnik kart:	Tak
Pamięć wewnętrzna:	0.5 GB
Adapter zewnętrznego zasilania:	Tak
Maksymalna temperatura termometru zwilżonego (wet bulb temp.) Podczas eksploatacji (w °f):	10 - 90 °F
Technologia okablowania:	10/100Base-T(X)
Możliwości montowania w stelażu:	Tak
Nośniki:	Flash
Pojemność stelaża:	1U
Całkowita pojemność przechowywania:	4 GB
Szeregowe porty komunikacyjne:	1
Dołączony wyświetlacz:	Nie
Interfejs SCSI:	RS-232/422/485