Instrukcja obsługi Crestron B10-BTN


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Crestron B10-BTN (4 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Crestron B10-BTN
Button Caps for the HTT-B10X
Installation Guide
Crestron B10-BTN Button Caps for the HTT-B10X
Button Caps for the HTT-B10X:
B10-BTN
Introduction
The Crestron® B10-BTN is available in four different models. For
simplicity within this guide, B10-BTN is used except where noted.
Models
MODEL NUMBER DESCRIPTION
B10-BTNB-T 5 BLANK Blank Buttons, Black
B10-BTNB-T 5 ENGRAVED Engraved Buttons, Black
B10-BTNW-T 5 BLANK Blank Buttons, White
B10-BTNW-T 5 ENGRAVED Engraved Buttons, White
Button Installation
The HTT-B10X is shipped with 10 blank buttons (two columns of five
buttons each). To replace one or both button columns, follow this
procedure:
1. Disconnect the 12 Volt power pack (if connected) and remove the
batteries.
2. Remove the four Phillips screws from the four corners on the
bottom of the unit.
3. Remove the cover from the front of the unit.
4. Remove the old button column(s) and replace with the new one(s),
making sure the column is seated in the two small holes on the
side. No screws are required.
Installation Guide – DOC. 6641A Button Caps for the HTT-B10X: B10-BTN
1
Button Caps for the HTT-B10X Crestron B10-BTN
5. Replace the cover on the front of the unit.
6. Replace the four Phillips screws on the bottom of the unit.
7. Reinstall batteries and reconnect 12 Volt power pack.
HTT-B10X Button Installation
2
Button Caps for the HTT-B10X: B10-BTN Installation Guide – DOC. 6641A


Specyfikacje produktu

Marka: Crestron
Kategoria: Nie skategoryzowane
Model: B10-BTN

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Crestron B10-BTN, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Crestron

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane