Instrukcja obsługi Cramer 82HD

Cramer nożyce do żywopłotu 82HD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cramer 82HD (130 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/130
2200086 (82HD)
EN | DE | ES | IT | FR | PT | NL | RU | FI | | SV | | NO | | DA |
PL | CS | SK | SL| HR| HU | RO| BG | EL | | AR | | TR | | HE |
LT | LV | ET |
cramer.eu
English (Original instructions)
SPECIFICATIONS
82HD
Voltage 82V
No load speed 4000 (±10%) min
-1
Blade speed 4000 (±10%) min
-1
Blade length 66 cm
Cutting capacity 33 mm
Measured sound pressure
level 83 dB (A), k=3.0
Guaranteed sound power
level 96 dB (A)
Vibration level <2.5 m/s², k=1.5 m/s²
Battery 82V220G/82V430G
82V220/82V430
Battery charger 82C1G/82C2/82C6
Weight (without battery) 4.2 kg
DESCRIPTION
See figure 1.
1. Blade cover
2. Blade
3. Guard
4. Front handle
5. Micro switch
6. Trigger Switch
7. Rotate release
8. Rear handle
9. Battery
10. Battery release button
11. On/off power button
12. Anti-jamming button
ASSEMBLY
UNPACKING
This product requires no assembly.
Carefully remove the product and any accessories
from the box. Make sure that all items listed in the
packing list are included.
Inspect the product carefully to make sure no
breakage or damage occurred during shipping.
Do not discard the packing material until you have
carefully inspected and satisfactorily operated the
product.
PACKING LIST
Hedge trimmer
Operator's manual
OPERATION
For complete charging instructions, refer to the
Operator’s Manuals for your battery pack and charger
models.
INSTALL BATTERY PACK
See figure 2.
Place the battery pack in the hedge trimmer. Align
groove in battery pack with raised rib on hedge
trimmer.
Make sure the latch on the hedge trimmer snaps
in place and that battery pack is secured in hedge
trimmer before beginning operation.
REMOVE BATTERY PACK
See figure 2.
Locate the latch on the hedge trimmer and depress
to release the battery pack from the hedge trimmer.
Remove battery pack from the hedge trimmer.
CAUTION
When placing battery pack in your hedge trimmer,
be sure groove in battery pack aligns with raised rib
on hedge trimmer and latch snaps in place properly.
Improper assembly of battery pack can cause
damage to internal components.
STARTING THE HEDGE TRIMMER
See figure 3.
Remove the blade cover.
Install the battery pack.
Press the power button (I/O) (11) to turn the unit on.
For added safety, there is a micro switch (5) in the
front handle. When operating, hold the trimmer with
both hands, one hand to squeeze the micro switch,
and the other hand to squeeze the trigger switch
(6).
STOPPING THE HEDGE TRIMMER
See figure 3.
Release the micro switch (5) and trigger switch (6)
to stop the hedge trimmer.
Press the power button (11) to turn off the hedge
trimmer.
Remove battery pack from the hedge trimmer.
1
English (Original instructions)
USING THE ROTATING REAR HANDLE
See figure 4.
Place the hedge trimmer on a flat and even surface.
Make sure that you released the trigger.
Pull the rotation lever (7) and begin turning the rear
handle. Release the rotation lever and turn the
handle 45 or 90 degrees to either side until it clicks
into place and the lever locks in.
To turn the handle back to center, pull the rotation
lever again, turn the handle slightly, release the
rotation lever and continue turning the handle until
it locks into place.
ANTI-JAMMING FUNCTION
If the branch is blocked in the blade, press the
anti-jamming button on the control panel, the blade
will reverse six times, and the branch should be
released.
OPERATING TIPS
Do not force the hedge trimmer through heavy
shrubbery. This can cause the blades to bind and
slow down. If the blades slow down, reduce the
pace.
Do not try to cut stems or twigs that are larger than
15 mm thick, or those obviously too large to feed
into the cutting blade. Use a non-powered hand saw
or pruning saw to trim large stems.
If desired, you can use a string to help cut your
hedge level. Decide how high you want the hedge.
Then, stretch a piece of string along the hedge at
this height. Trim the hedge just above this guide line
of string. . Trim the side of a hedge so See Figure 5
that it will be slightly narrower at the top. See Figure
6. More of the hedge will be exposed when shaped
this way, and it will be more uniform. If blades do
become jammed, stop the motor, allow the blades to
stop and remove the battery pack before attempting
to remove the obstruction.
Wear gloves when trimming thorny or prickly
growth. When trimming new growth, use a wide
sweeping action, so that the stems are fed directly
into the cutting blade. Older growth will have thicker
stems and will be trimmed easiest by using a
sawing movement.
DANGER
If blade jams on any electrical cord or line, DO
NOT TOUCH THE BLADE! IT CAN BECOME
ELECTRICALLY LIVE AND VERY DANGEROUS.
Continue to hold the hedge trimmer by the insulated
rear handle or lay it down and away from you in a
safe manner. Disconnect the electrical service to
the damaged line or cord before attempting to free
the blade from the line or cord. Failure to heed
this warning will result in serious personal injury or
possible death.
WARNING
Clear the area to be cut before each use. Remove
all objects such as cords, lights, wire, or string which
can become entangled in the cutting blade and
create a risk of serious personal injury.
WARNING
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use a clean cloth to remove
dirt, oil,grease, etc. When servicing use only identical
CRAMER replacement parts. Use of any other parts
can create a hazard or cause product damage.
CAUTION
Do not at any time let brake uids, gasoline,
petroleum based products, penetrating oils, etc.,
come in contact with plastic parts. They contain
chemicals that may damage, weaken, or destroy
plastics.
MAINTENANCE AND REPAIR
BLADE MAINTENANCE – HEDGE TRIMMER
WARNING
Battery units do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. To prevent serious personal
injury, always remove the battery and take extra
precautions and care when performing maintenance,
service or for changing the cutting blade.
2

Specyfikacje produktu

Marka: Cramer
Kategoria: nożyce do żywopłotu
Model: 82HD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cramer 82HD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Cramer

Cramer

Cramer 82HD75 Instrukcja

4 Października 2024
Cramer

Cramer 82PHT Instrukcja

14 Września 2024
Cramer

Cramer 82PHA Instrukcja

12 Września 2024
Cramer

Cramer 82HD Instrukcja

11 Września 2024
Cramer

Cramer 82HD62 Instrukcja

2 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024
Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Einhell

Einhell Royal HEC 551 Instrukcja

9 Października 2024
Dolmar

Dolmar HT-2460 Instrukcja

9 Października 2024