Instrukcja obsługi Craftsman GHT500S

Craftsman nożyce do żywopłotu GHT500S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Craftsman GHT500S (8 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
Operator’s Manual
CAUTION: Read, understand and follow all
Safety Rules and Operating Instructions in this
Manual before using this product.
• WARRANTY
• SAFETY
• ASSEMBLY
• OPERATION
• MAINTENANCE
• PARTS LIST
• ESPAÑOL
20-in. 4.2 Amp
Electric
Hedge Trimmer
Model No. 172.797740
final Eng.
11-13
4
SAFETY INSTRUCTIONS
WARNING:
If correctly used, this electric Hedge Trimmer is an efficient
tool to use; if used improperly or without the due precautions it could become a
dangerous tool. For pleasant and safe work, ALWAYS strictly comply with the safety
rules that are contained in this manual.
!
WARNING:
BE SURE to read and understand all instructions in this manual
before using this electric Hedge Trimmer. Failure to follow all instructions listed
below may result in electric shock, fire an or serious personal injury.d /
!
WARNING:
To avoid mistakes that could cause serious injury, DO NOT
connect the Hedge Trimmer to the power source until the following instructions
have been read and understood.
!
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE.
The term power tool in the warnings refers to your electric (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
• Avoid Dangerous Environment - Don't use appliances in damp or wet locations.
• Keep work area clean and well lit. Cluttered or dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
ELECTRICAL SAFETY
• Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with grounded power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
• Avoid body contact with grounded surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is grounded.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase
the risk of electric shock.
• Do Not Abuse Cord - Never carry appliance by cord or yank it to disconnect from receptacle.
Keep cord from heat, oil, and sharp edges.
Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
• Operating a power tool in a damp location is unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an GFCI reduces the risk of electric shock.
GENERAL POWER TOOL SAFETY WARNINGS
WARNING:
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/or serious injury.
!
SAFETY INSTRUCTIONS cont.
Safety Helmet
Protection
Eye
Protection
Heavy Duty
Gloves
Hearing
Protection
Safety Shoes
Safety Chaps
Snug Fitting
Clothing
• Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask,
non-skid safety shoes, hard hat, or hearing protection
used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position before connecting to
power source and/or battery pack, picking up or carrying the tool. Carrying power tools with
your finger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or
a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times.
This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of dust collection can reduce
dust-related hazards.
PERSONAL SAFETY
• Don't grasp the exposed cutting blades or cutting edges when picking up or holding
the appliance or power tool.
• Don't Force Applianc Power Tool - It will do the job better and with less likelihood of ae/
risk of injury at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot
be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts
and any other condition that may affect the power tools operation. If damaged, have the
power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• Maintain Appliance With Care - Keep cutting edge sharp and clean for best performance and to
reduce the risk of injury. Follow instructions for lubricating and changing accessories.
Inspect appliance cord periodically, and if damaged, have it repaired by an authorized service facility.
Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free
from oil and grease.
• Use the power tool, accessories and tool bits etc., in accordance with these instructions
and in the manner intended for the particular type of power tool, taking into account the
working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
POWER TOOL USE AND CARE SAFETY
SERVICE
• Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5
76
SAFETY INSTRUCTIONS cont.
If the hedge trimmer blades jam or get caught on an electrical cord or wires, DO NOT
TOUCH THE BLADE OR ELECTRICAL CORD OR WIRES FOR ANY REASON! THE
BLADE COULD BE ELECTRICALLY “LIVE” AND CAUSE SERIOUS OR FATAL
PERSONAL INJURY.
Release, drop, set-down the hedge trimmer in the safest way possible, disconnect
the damaged electrical cord or wires from the power source if possible. If that is not
possible, call an electrician, electrical contractor, or the power company for assistance.
Failure to heed this DANGER warning will cause serious personal injury and
possible death.
DANGER: ALWAYS USE EXTREME CARE WHEN OPERATING YOUR HEDGE
TRIMMER.
!
1. DO NOT use the tool if switch does not turn it “On” or “Off”. Any tool that cannot be
controlled with the switch is dangerous and must be repaired.
2. DISCONNECT the plug from the power source before making any adjustments,
changing accessories or storing the tool. Such preventive safety measures reduce the
risk of starting the tool accidentally.
3. STORE idle tools out of the reach of children and other untrained persons. Children
MUST NOT operate the tool. Tools are dangerous in the hands of untrained users.
WARNING:
BE SURE to read and understand all instructions before
operating this tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious personal injury.
!
DANGER:
Keep hands away from blade.
Contact with blade will result in
serious personal injury.
Keep all parts of the body away from the cutter blade. Do not remove cut material or
hold material to be cut when blades are moving. Make sure the switch is off when
clearing jammed material. Blades coast after turn off.
A moment of inattention while
operating the hedge trimmer may result in serious personal injury.
!
WARNING:
Only use with handle and guard properly assembled to hedge
trimmer. The use of the hedge trimmer without the proper guard or handle provided may
result in serious personal injury.
!
POWER TOOL USE AND CARE SAFETY cont.
4. MAINTAIN hedge trimmer with care. Keep cutting blades sharp and clean for best
performance and to reduce the risk of injury. Inspect extension cord periodically and
replace if damaged. Keep handles dry, clean and free from oil and grease.
5. CHECK for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool's operation. If damaged, have the tool serviced
before using. Many accidents are caused by poorly maintained tools.
6. ALWAYS INSPECT the hedges, bushes, plantings that you are going to trim for hidden
wires, pipe, landscape boards or other obstructions that could get caught in, or damage
the cutting bar or blades.
7. DO NOT store the hedge trimmer on or adjacent to fertilizers or garden chemicals.
Fertilizers and garden chemicals contain agents which greatly accelerate the corrosion
of metals, such as the hedge trimmer’s blades and cutting bar.
NOTE: IMPORTANT Lubricate the blades before and after each use. Ignoring
lubrication will shorten blade life and affect cutting operation.
SAFETY INSTRUCTIONS cont.
EXTENSION CORDS
Use a proper extension cord. ONLY use cords listed by Underwriters Laboratories (UL).
Other extension cords can cause a drop in line voltage, resulting in a loss of power
and overheating of tool.
For this tool an AWG (American Wire Gauge) size of a least 14-gauge is recommended
for an extension cord of 25-ft. or less in length. Use 12-gauge for an extension cord
of 50-ft. Extension cords 100-ft. or longer are not recommended.
WARNING:
GFCI (Ground Fault Circuit Interrupter) protection should be
provided on all circuits or outlets to be used for electric hedge trimmers and lawn and
garden power tools. Receptacles are available having built-in GFCI protection and
should be used for this measure of protection.
• Double insulation DOES NOT take the place of normal safety precautions when
operating this tool.
•
Guard against electric shock: Prevent body contact with grounded surfaces.
For example: metal pipes, wire fences.
!
3. BEFORE plugging in the tool, BE SURE that the outlet voltage supplied is within the voltage
marked on the tool’s data plate. use “AC only” rated tools with a DC power supply.DO NOT
4. DO NOT expose tools to rain or wet conditions or use electric tools in wet or damp
locations. Water entering an electric tool will increase the risk of electric shock.
5. If operating an electric tool in damp locations is unavoidable, ALWAYS USE a
Ground Fault Circuit Interrupter to supply power to your tool. ALWAYS WEAR
electrician’s rubber gloves and footwear in damp conditions.
6. To reduce the risk of electric shock, use only with an extension cord intended for outdoor use,
such as an extension cord of cord type: SW-A, SOW-A, STW-A, STOW-A, SJW-A,
SJOW-A, SJTW-A. or SJTOW-A.
Take damaged tools to a qualified service dealer for inspection7. INSPECT tool cords for damage.
and repair using identical replacement parts. to stay constantly aware of the cord locationBE SURE
and keep it well away from the cutting blade.
8. DO NOT abuse the extension cord. NEVER use the cord to carry the tool by or to
pull the plug from the outlet. Keep cord away from heat, oil, sharp edges or moving parts.
Replace damaged cords immediately. Damaged cords increase the risk of electric shock.
ELECTRICAL SAFETY
WARNING:
Do not permit fingers to touch the terminals of plug when
installing or removing the extension cord from the plug.
!
1. Double insulated tools are equipped with a polarized plug
(one blade is wider than the other and will require the use of a
polarized extension cord). The Hedge Trimmer’s plug will fit into a
polarized extension cord only one way. If the plug does not fit fully into
the extension cord, reverse the plug. If the plug still does not fit, obtain
a correct polarized extension cord. A polarized extension cord will require the use of a polarized
wall outlet. This plug will fit into the polarized wall outlet only one way. If the plug does not fit
fully into the wall outlet, reverse the plug. If the plug still does not fit, contact a qualified
electrician to install the proper outlet. the equipment plug,Do not change or alter
extension cord receptacle, or extension cord plug in any way.
2. Double insulation eliminates the need for the three-wire grounded power cord and
grounded power supply system. Applicable only to Class II (double-insulated) tools.
This Hedge Trimmer is a double insulated tool.

Specyfikacje produktu

Marka: Craftsman
Kategoria: nożyce do żywopłotu
Model: GHT500S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Craftsman GHT500S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Craftsman

Craftsman

Craftsman GHT500S Instrukcja

5 Września 2024
Craftsman

Craftsman CMEHTS824 Instrukcja

20 Sierpnia 2024
Craftsman

Craftsman CMCPHT818B Instrukcja

4 Lipca 2024
Craftsman

Craftsman CMCPHT818 Instrukcja

3 Lipca 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024
Ozito

Ozito PXCGSS-018 Instrukcja

10 Października 2024
Einhell

Einhell Royal HEC 551 Instrukcja

9 Października 2024
Dolmar

Dolmar HT-2460 Instrukcja

9 Października 2024