Instrukcja obsługi Cotech YT4755

Cotech piła YT4755

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech YT4755 (84 stron) w kategorii piła. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/84
ENGLISHSVENSK ANOR SKSUOMIDEUTSCH
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
Art.no Model
18-3155 YT4755-UK
40-7936 YT4755
Chainsaw
Elkedjesåg
Elektrisk kjedesag
Ketjusaha
Elektro-Kettensäge
Ver. 20140116
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
2
ENGLISH
Electric Chainsaw, 1800 W
Art.no 18-3155 Model YT4755-UK
40-7936 YT4755
Read theentire instruction manual before using theproduct and keep it for future reference. We reserve theright
for any errors in text or images and any necessary changes made to technical data. If you have any questions
concerning technical problems please contact our Customer Services (see address on reverse.)
Warning! When you are using electric hand tools theincluded safety instructions should be followed
to avoid risk of fire, electric shock, and personal injury.
Always pull theplug out of thewall socket before servicing and adjusting theproduct.
1. Safety Requirements – Handheld power tools
General Safety Requirements – EN 60745-1
Warning! Read all theinstructions. Failure to adhere to thefollowing instructions may lead to electric shocks,
fires and/or serious injury. The term “power tools” in thewarning text below refers to your handheld mains
operated or battery operated tool.
SAVE THESE INSTRUCTIONS.
1) Work area
a) Keep thework area clean and well illuminated. Cluttered and poorly lit areas invite accidents.
b) Do not use power tools in explosive environments, e.g. near flammable liquids, gases or dust.
Power tools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders away from thearea where you are using thepower tool.
Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) The power tool’s plug must fit correctly into thewall socket. Never modify theplug in any way. Never use
anadaptor together with earthed power tools. Unmodified plugs and suitable wall sockets decrease therisk
of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or refrigerators.
There is anincreased risk of receiving anelectrical shock if your body is earthed.
c) Do not expose thepower tool to rain or other wet conditions. If water gets inside apower tool it increases
therisk of electric shock.
d) Do not abuse thelead. Never use thelead to carry thetool or pull theplug from thewall socket.
Keep thelead away from heat, oil, sharp edges and movable parts. Damaged or tangled leads increase
therisk of electric shock.
e) When using power tools outdoors, use anextension lead that is suitable for this purpose.
Use of anextension lead designed for outdoor use decreases therisk for electric shock.
f) If for some reason you must use apower tool in awet environment, always connect it to themains via
an earth-fault circuit breaker such as anRCD (residual current device). Using anRCD significantly reduces
thechances of you receiving anelectric shock.
3
ENGLISH
3) Personal safety
a) Pay attention to your actions and use common sense when using power tools. Never use power tools if
you are tired or under theinfluence of drugs, alcohol or medication. One moment of inattention while using
apower tool may result in serious injury.
b) Use protective equipment. Always wear safety glasses. Using protective clothing such as dust masks,
non-slip safety shoes, helmets and ear defenders when needed decreases therisk of injury.
c) Avoid accidental starts. Make sure that thepower switch is set to OFF before plugging thetool into awall
socket. Never carry apower tool with your finger on thetrigger and never connect thepower tool to awall
socket when theswitch is set to ON, since it may result in injury.
d) Remove all service tools/keys before switching on thepower tool. A service tool left on amoving part of
thepower tool may result in injury.
e) Do not overreach. Make sure you stand steady and well balanced at all times. This will allow you to have
more control in unexpected situations.
f) Wear suitable clothing. Do not wear loose-fitting clothing or jewellery. Keep hair, clothes and gloves away
from moving parts. Loose-fitting clothes, jewellery or long hair could become caught in moving parts.
g) If equipment for dust extraction or collection is available, make sure that it is connected and used properly.
Using technical aids may decrease dust related hazards.
4) Use and maintenance of power tools
a) Do not force thepower tool. Use apower tool suitable for thework you are about to perform. The proper
power tool will perform thetask better and safer if used at thecorrect feed rate.
b) Never use thepower tool if thepower switch does not switch thetool on and off properly. All power tools
that cannot be controlled by thepower switch are dangerous and must be repaired.
c) Unplug thelead from thewall socket before making any adjustments, changing accessories or storing
thepower tool. These precautions reduce therisk of thepower tool starting unexpectedly.
d) Store any power tools that are not being used out of children’s reach. Do not allow people who are
unfamiliar with thetool or its functions to operate thetool. Power tools can be dangerous if they fall into
thehands of inexperienced users.
e) Maintaining power tools. Check for any incorrect settings, parts that catch, broken parts or anything else
which may cause thepower tool to malfunction. If something is damaged it must be repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep tools sharp and clean. Properly maintained cutting tools with sharp blades are less likely to jam and
are easier to control.
g) Use thepower tool, accessories and similar according to theinstructions and in anappropriate way suitable
for thetype of power tool used. Also take into consideration your work environment and thetype of work
to be done. Using thepower tool for apurpose other than that for which it is intended could result in
adangerous situation.
5) Service
a) Repairs and service should only be performed by qualified tradesmen, and only with original spare parts.
This guarantees that thesafety of thepower tool is maintained.

Specyfikacje produktu

Marka: Cotech
Kategoria: piła
Model: YT4755

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cotech YT4755, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje piła Cotech

Cotech

Cotech 92502W Instrukcja

1 Września 2024
Cotech

Cotech PN3800II Instrukcja

2 Czerwca 2024
Cotech

Cotech YT4755 Instrukcja

2 Czerwca 2024
Cotech

Cotech M1Y-YH5-185 Instrukcja

2 Czerwca 2024
Cotech

Cotech CS 18 Instrukcja

2 Czerwca 2024

Instrukcje piła

Najnowsze instrukcje dla piła

HiKOKI

HiKOKI C10FSB Instrukcja

24 Października 2024
Alpha Tools

Alpha Tools BSL 750 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 600 E Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools MHK 500 Instrukcja

22 Października 2024
Alpha Tools

Alpha Tools PS 520E Instrukcja

22 Października 2024
Makita

Makita 4333 dwde Instrukcja

15 Października 2024
Makita

Makita 5103r Instrukcja

15 Października 2024
Meec Tools

Meec Tools 000-707 Instrukcja

6 Października 2024
Meec Tools

Meec Tools 004-907 Instrukcja

6 Października 2024
Kress

Kress 1400 DS Instrukcja

5 Października 2024