Instrukcja obsługi Cotech M1E-TD3-510

Cotech nożyce do żywopłotu M1E-TD3-510

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech M1E-TD3-510 (36 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/36
ENGLISHSVENSK ANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
Art.no Model
18-3147 M1E-TD3-510-UK
40-7205 M1E-TD3-510
Hedge Trimmer
Häcksax
Hekksaks
Pensasleikkuri
Heckenschere
Ver. 20131003
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
3
ENGLISH
Hedge Trimmer
Art.no. 18-3147 Model M1E-TD3-510-UK
40-7205 M1E-TD3-510
Please read theentire instruction manual before use and save it for future reference. We reserve theright for any
errors in text or images and for making any necessary technical changes to this document. If you should have
any questions concerning technical problems please contact our Customer Services.
1. General Safety Instructions
Caution: Read all instructions. Failing to adhere to thefollowing instructions may lead to electric shock, fire and/
or serious injury. The term “power tools” in thewarning text below refers to your handheld mains operated or
battery operated tool.
SAVE THESE INSTRUCTIONS.
1) The work area
a) Keep thework area clean and well illuminated. Cluttered and poorly lit areas invite accidents.
b) Do not use power tools in explosive environments, e.g. near flammable liquids, gases or dust.
Power tools generate sparks that can easily ignite dust or fumes.
c) Keep children and other bystanders away from thearea where you are using thepower tool.
Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) The power tool’s plug must fit correctly into thewall socket. Never modify theplug in any way. Never use
anadaptor together with earthed power tools. Unmodified plugs and suitable wall sockets decrease therisk
of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or refrigerators. There is
anincreased risk of electrical shock if your body is earthed.
c) Do not expose thepower tool to rain or other wet conditions. If water gets inside apower tool it increases
therisk of electric shock.
d) Do not abuse thelead. Never use thelead to carry thetool or pull theplug from thewall socket.
Keep thelead away from heat, oil, sharp edges and movable parts. Damaged or tangled leads increase
the risk of electric shock.
e) When using power tools outdoors, use anextension lead that is suitable for this purpose. Use of
anextension lead designed for outdoor use decreases therisk for electric shock.
f) If operating apower tool in adamp location is unavoidable, use aresidual current device (RCD) protected
supply. Use of anRCD reduces therisk of electric shock.
3) Personal safety
a) Pay attention to your actions and use common sense when using power tools. Never use power tools if
you are tired or under theinfluence of drugs, alcohol or medication. One moment of inattention while using
apower tool may result in serious injury.
b) Use protective equipment. Always wear safety glasses. Using protective clothing such as dust masks, non-
slip safety shoes, helmets and ear defenders when needed decreases therisk of injury.
c) Avoid accidental starts. Make sure that thepower switch is set to before plugging thetool into awall OFF
socket. Never carry apower tool with your finger on thetrigger and never connect thepower tool to awall
socket when theswitch is set to , since it may result in injury.ON
d) Remove all service tools/keys before switching on thepower tool. A service tool forgotten on arotating part
of thepower tool may result in injury.

Specyfikacje produktu

Marka: Cotech
Kategoria: nożyce do żywopłotu
Model: M1E-TD3-510

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cotech M1E-TD3-510, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Cotech

Cotech

Cotech M1E-TD3-510 Instrukcja

2 Września 2024
Cotech

Cotech HT 18 Instrukcja

30 Sierpnia 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

PowerPlus

PowerPlus POW6128 Instrukcja

7 Grudnia 2024
Bavaria

Bavaria BPH 2652/1 Instrukcja

6 Grudnia 2024
PowerPlus

PowerPlus POW6110 Instrukcja

5 Grudnia 2024
Kibani

Kibani WPET1206 - XXL Instrukcja

15 Października 2024
Tanaka

Tanaka THT-2000SB Instrukcja

15 Października 2024
Black & Decker

Black & Decker BHT518 Instrukcja

14 Października 2024
MacAllister

MacAllister MHTP24EB Instrukcja

13 Października 2024
Husqvarna

Husqvarna 226HS99S Instrukcja

12 Października 2024
Husqvarna

Husqvarna 122HD60 Instrukcja

11 Października 2024
Florabest

Florabest FHT 600 B2 Instrukcja

11 Października 2024