Instrukcja obsługi Cotech HL-DT108-37

Cotech Maszyna do śrub HL-DT108-37

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech HL-DT108-37 (28 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du bruker enheten
og oppbevar dem for senere bruk.
Tärkeätä tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Sladdlös borrmaskin
Kabelfri boremaskin
Akkuporakone
Art.no. Model
18-3125 HL-DT108-37-UK
40-6999 HL-DT108-37
ENGLISHSVENSKANORSKSUOMI
Cordless
Drill/Driver
Ver. 200905
2
ENGLISH
Cordless Drill/Driver
Art.no. 18-3125 Model HL-DT108-37-UK
40-6999 HL-DT108-37
Please read the entire instruction manual before use and save it for future
reference. We reserve the right for any errors in text or images and for making any
necessary technical changes to this document. If you should have any questions
concerning technical problems please contact our Customer Services.
Safety
General safety instructions for cordless power tools
Caution: Read all instructions. Failing to adhere to the following instructions may
lead to electric shock, re and/or serious injury. The term “electrical hand tools”
in the warning text below refers to your mains operated or battery operated hand
tool. SAVE THESE INSTRUCTIONS.
1) The work area
a) Keep the work area clean and well illuminated. Cluttered and poorly lit areas
invite accidents.
b) Do not use electrical power tools in explosive environments, e.g. close to
ammable liquids, gases or dust. Electrical hand tools generate sparks that
can easily ignite dust or fumes.
c) Keep children and other bystanders away from the area where you are using
the electrical hand tool. Distractions can cause you to lose your concentration
and control.
2) Electrical safety
a) The electrical hand tool’s plug must t correctly into the wall socket. Never
modify the plug in any way. Never use an adaptor together with earthed
electrical hand tools. Unmodied plugs and suitable wall sockets decrease the
risk of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or
refrigerators. There is an increased risk of electrical shock if your body is earthed.
c) Do not expose the electrical hand tool to rain or other wet conditions. If water
gets inside an electrical hand tool it increases the risk of electric shock.
d) Do not abuse the lead. Never use the lead to carry the tool or pull the plug
from the wall socket. Keep the lead away from heat, oil, sharp edges and
movable parts. Damaged or tangled leads increase the risk of electric shock.
e) When using electrical hand tools outdoors use an extension lead that is
suitable for this purpose. Use of an extension lead designed for outdoor use
decreases the risk for electric shock.
3
ENGLISH
3) Personal safety
a) Pay attention to your actions and use common sense when using electrical
hand tools. Never use electrical hand tools if you are tired or under the
inuence of drugs, alcohol or medication. One moment of inattention while
using an electrical hand tool may result in serious injury.
b) Use protective equipment. Always wear safety glasses. Using protective
clothing such as dust masks, non-slip safety shoes, helmets and ear defenders
when needed decreases the risk of injury.
c) Avoid accidental starts. Make sure that the power switch is set to OFF before
connecting the device to a wall socket. Never carry an electrical hand tool with
your nger on the trigger and never connect the hand tool to a wall socket
when the switch is set to ON, since it may result in injury.
d) Remove all service tools/keys before switching on the hand tool. A service tool
left on a moving part of the electrical hand tool may result in injury.
e) Do not overreach. Make sure you stand steady and well balanced at all times.
This will allow you to have more control in unexpected situations.
f) Wear suitable clothing. Do not wear loose-tting clothing or jewellery. Keep
hair, clothes and gloves away from moving parts. Loose-tting clothes,
jewellery or long hair could become caught in moving parts.
g) If equipment for dust extraction or collection is available, make sure that it is
connected and used properly. Using technical aids may decrease dust related
hazards.
4) Use and maintenance of electrical hand tools.
a) Do not force the electrical hand tool. Use an electrical hand tool suitable for the
work you are about to perform. The proper electrical hand tool will perform the
task better and safer if used at the correct feed rate.
b) Never use the electrical hand tool if the power switch does not switch the tool
on and off properly. All electrical hand tools that cannot be controlled by the
power switch are dangerous and must be repaired.
c) Unplug the lead from the wall socket before making any adjustments, changing
accessories or storing the electrical hand tool. These precautions reduce the
risk of the electrical hand tool starting unexpectedly.
d) Store electrical hand tools that are not being used out of children’s reach.
Do not allow people who are unfamiliar with the tool or its functions to operate
the tool. Electrical hand tools can be dangerous if they fall into the hands of
inexperienced users.
e) Maintaining electrical hand tools. Check for any incorrect settings, parts that
catch, broken parts or anything else which may cause the electrical hand tool
to malfunction. If something is damaged it must be repaired before use. Many
accidents are caused by poorly maintained electrical hand tools.
f) Keep tools sharp and clean. Properly maintained cutting tools with sharp
blades are less likely to jam and are easier to control.

Specyfikacje produktu

Marka: Cotech
Kategoria: Maszyna do śrub
Model: HL-DT108-37

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cotech HL-DT108-37, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do śrub Cotech

Cotech

Cotech HL-DT108-37 Instrukcja

29 Sierpnia 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Total

Total TAT40342 Instrukcja

17 Grudnia 2024
Total

Total TAT40122 Instrukcja

17 Grudnia 2024
Total

Total TCKLI2006 Instrukcja

17 Grudnia 2024
Güde

Güde MS 4.0-150-17 4in1 Akku-Schrauber inkl. Koffer + Akku 1.5Ah + Zub Instrukcja

17 Grudnia 2024
Fein

Fein ASCD 12-150 W4 Select Instrukcja

15 Grudnia 2024
Fein

Fein ASCD 12-100 W4 Select Instrukcja

15 Grudnia 2024
Fein

Fein ASCD 18-1000 W34 Select Instrukcja

15 Grudnia 2024
Fein

Fein ASCD 18-300 W2 Select Instrukcja

15 Grudnia 2024
Hilti

Hilti SID 2‑A12 Instrukcja

10 Grudnia 2024
Black Decker

Black Decker 2038 Instrukcja

8 Grudnia 2024