Instrukcja obsługi Cooper Lighting PQS45

Cooper Lighting Niesklasyfikowane PQS45

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cooper Lighting PQS45 (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
PQS45
Instruction Manual
Instrucciones
Directives
Call for customer service and/or missing or damaged parts (800-334-6871)
English
PQS45
2
Congratulations. You have purchased a 500 watt portable worklight. This light is
perfect for those applications where a wide concentration of light is needed. Use it to
light the entire working area around any inside or outside project that you might have.
WHAT YOU NEED
• Screwdriver
WHATʼS INCLUDED
• Light head (A)
• (2) 500 watt quartz halogen bulbs (B)
• Safety guard (C)
• Stand (D)
• Handle (E)
• Light bracket (F)
• (4) Lock washers (G)
• (4) Regular washers (H)
• (2) Short bolts (I)
• (2) Long bolts (J)
• (2) Spacers (K)
• (2) Light head knobs (L)
• (4) Screws (M)
WHAT TO KNOW
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, ELECTRIC SHOCK,
EXPOSURE TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS.
IMPORTANT SAFETY INSTRUCTIONS.
Lighted lamp is HOT!
WARNING: To reduce the risk of FIRE, ELECTRIC SHOCK, EXPOSURE
TO EXCESSIVE UV RADIATION OR INJURY TO PERSONS:
• Turn off/unplug and allow to cool before replacing bulb (lamp).
• Bulb (lamp) gets HOT quickly! Only contact switch/plug when turning on.
• Do not touch hot lens, guard or enclosure.
• Do not remain in light if skin feels warm.
• Do not look directly at lighted lamp.
• Keep away from materials that may burn.
• Use only with a 500 watt or smaller bulb (lamp).
• Do not touch the bulb (lamp) at any time. Use a soft cloth. Oil from skin may
damage bulb (lamp).
I
J M
G
H
KL
A
B
C
D
E
F
Call for customer service and/or missing or damaged parts (800-334-6871)
3
• Do not operate the portable luminaire with a missing or damaged guard, lamp
containment barrier (lens) or UV filter.
• If lens is replaced, use only a diffused tempered safety glass of equal thickness.
• Use of bulb(s) of higher wattage rating than what is listed in the safety instructions
will void the warranty.
• Dissassembly of the fixture will void the warranty.
• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other
connection voids warranty.
• The electrical system, and the method of electrically connecting the fixture to it,
must be in accordance with the National Electrical Code and local building codes.
• For indoor and outdoor use.
• cULus Listed.
WARNING: When using outdoor use portable luminaires, basic safety
precautions should always be followed to reduce the risk of fire, electric
shock, and personal injury, incuding the following:
Read all instructions.
• Use only three-wire outdoor extension cords that have three-prong grounding plugs
and grounding recptacles that accept the applianceʼs plug.
• Ground Fault Circuit Interrupter (GFCI) protection is to be provided on the circuit(s)
or outlet(s) to be used for the wet location portable luminaire. Receptacles are
available having built-in GFCI protection and are able to be used for this measure
of safety.
• Use only with an extrension cord for outdoor use, such as an extension cord of
cord type SW, SW-A, SOW, SOW-A, STW, STW-A, STOW, STOW-A, SJW, SJW-A,
SJOW, SJOW-A, SJTW, SJTW-A, SJTOW, SJTOW-A.
SAVE THESE INSTRUCTIONS.
ASSEMBLING YOUR FIXTURE
WARNING: Deviation from the assembly instructions may result in a
risk of fire or electric shock.
1. Attach light head (A) and handle (E) to the light
bracket (F). This step will require using the
(2) long bolts, (2) lock washers, (2) spacers,
(4) regular washers and (2) light head knobs
(Fig. 1).
2. Attach the light bracket (F) to the stand (D) using (2) short bolts.
3. Attach handle to light fixture using 4 screws.
4. Install the grille guard (C) in the light fixture by inserting one side of the guard
between the frame and the lens. Squeeze the guard until the other side can be
placed between the opposite side of the frame and lens.
Fig. 1

Specyfikacje produktu

Marka: Cooper Lighting
Kategoria: Niesklasyfikowane
Model: PQS45

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cooper Lighting PQS45, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Cooper Lighting

Cooper Lighting

Cooper Lighting MSLED100 Instrukcja

25 Września 2024
Cooper Lighting

Cooper Lighting PQS45 Instrukcja

25 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024