Instrukcja obsługi Concord Ultimax


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Concord Ultimax (29 stron) w kategorii fotelik samochodowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/29
Instruction for fitting and use
GB
0235-01
GB
Using the ULTIMAX child car seat
0236-02
To safeguard your child you have
opted for our CONCORD
ULTIMAX seat. This product is
manufactured under strict quality
controls. Its excellent safety
features work best when the seat
is used in accordance with legal
requirements. Be sure, therefore,
to comply fully with the
instructions for its installation and
use.
The ULTIMAX is suitable for
infants from birth up to 18 kg or
for children up to the age of
approx. 4 years. The seat may
be used on all seats in your car
fitted with a three-point seat belt.
On the basis of accident
statistics, we recommend using
the seat behind the passenger
seat.
The child car seat comprises
three parts: seat shell (A), base
unit (B) and
reboard wedge (C).
The seat can also be engaged
in four different seat positions
when facing forwards and in one
position when rear-facing.
The seat shell must not be
removed while the child is still
seated in it.
Summary of contents:
1. Rear-facing installation (from
birth to 13 kg).
2. Front-facing installation (from
9 to 18 kg).
3. Securing the child.
4. Adjusting the head support /
adjusting the seat to the
child’s size.
5. Releasing and removing the
seat.
6. Removing the cover /
removing the pelvic insert.
7. Care instructions
8. Important information
9. Warranty terms
10. General information
A
B C
0106-02
2
1
1. Rear-facing installation (from birth to 13 kg)
0237-02
Important!
Do not use on seats
with airbags.
Extreme danger!
Turn the rotary handle at the front
of the seat shell upwards (1) and
at the same time push the seat
shell into the upright position (2).
Hold the seat shell with your
thumbs on the left and right side
and use your fingers to pull the
grey levers as far as they will go
in the direction of the arrow. Keep
the levers extended and lift the
seat shell upwards and out until
the component is visiblegreen
above the snap mechanism.
Then release the levers and
remove the seat shell.
Insert the base unit into the car
seat as illustrated.
Position the reboard wedge
( ) as shown.green
0014-07 0017-06 0013-04
A
I
R
B
A
G
1.2 1.31.1


Specyfikacje produktu

Marka: Concord
Kategoria: fotelik samochodowy
Model: Ultimax

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Concord Ultimax, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje fotelik samochodowy Concord

Instrukcje fotelik samochodowy

Najnowsze instrukcje dla fotelik samochodowy