Instrukcja obsługi Bertoni Pilot


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bertoni Pilot (6 stron) w kategorii fotelik samochodowy. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
GROUP 1
(9-18 kg)
MANUAL INSTRUCTION
PILOT
CAR SEAT
EN
IMPORTANT! KEEP FOR FURTHER REFERENCES .
READ CAREFULLY!
Note: The child restraint is only suitable for
use with lap/3-point safety belts, approved
to ECE R16 or equivalent standards.
INSTALLATION OF THE SEAT IN A CAR
RECLINE POSITION ADJUSTMENT
Note There are three feasible positions
when using the car seat in a vehicle:
upright, middle and inclined. See
To achieve that use the lever located in
front of the child restraint. Pull the lever out
and hold it at the same time pull back or
forward the sitting part of the child restraint.
When the sitting part is in desired position
release the lever. The “click” sound means
that the seat is well fixed. See / Fig II / .
:
./ Fig I /
INSTALLATION IN THE CAR
Note: Child’s weight between 9 to 18 kg,
please make sure to use in forward facing
position.
Warning: For maximum protection install the
car seat onto the center rear seat of the vehicle.
( II )
( I )
For group I kg / 9 - 18 /
Place the car seat in forward facing position on
the seat of the car. See Fig III / / .
l Place the child seat in upright position.
l Place the child seat in forward-facing
position.
l Pull the vehicle seatbelt tight and pass
through the openings of the child seat.
l .Fasten the seatbelt and pull it tight Ensure
that the seatbelt is not twisted.
( III )
Forward - facing position
Note: Be sure to check whether the seatbelts
are snug and flat, not broken and tighten
properly These must be taken on each time .
when a child is fixed in the child restraint.
Note: Do not place your child in a sleeping
bag, blanket or other bulky wrapping before
putting a child in the car seat. To ensure child’s
back is evenly supported do not put more than
one nappy on the child and make sure the
nappy is not likely folded at the back.
1. Press the red button on the buckle of the
safety belt and release shoulder belts.
2. Put shoulder belts aside and place your child
into the seat.
3. Put the shoulder belts on the child’s
shoulders and insert both metal elements into
the buckle until “click” sound is heard.
4. The space between child’s body and
shoulders must be two-fingers width.
5. Pull the shoulder belts to check that the
buckle is well locked.
6. To unfasten the belts press the lever on the
front part of the seat and pull the shoulder belts
out. See Fig IV / / .
PLACING YOUR CHILD INTO A CAR SEAT


Specyfikacje produktu

Marka: Bertoni
Kategoria: fotelik samochodowy
Model: Pilot

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bertoni Pilot, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje fotelik samochodowy Bertoni

Bertoni

Bertoni Pilot Instrukcja

1 Kwietnia 2025
Bertoni

Bertoni F1 Instrukcja

1 Kwietnia 2025
Bertoni

Bertoni Uno Instrukcja

27 Września 2024

Instrukcje fotelik samochodowy

Najnowsze instrukcje dla fotelik samochodowy