Instrukcja obsługi Conair Weight Watchers WW701

Conair Libra Weight Watchers WW701

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Conair Weight Watchers WW701 (2 stron) w kategorii Libra. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

COLOR INFO:

1/C job: Black

with bleed

- the page with

the IB # on it is

the BACK PANEL.

registered trademark of Weight Watchers International Inc. and used under license.

Service Centers

Conair Corporation

Service Department

150 Milford Road

East Windsor, NJ 08520

Conair Corporation

Service Department

7475 N. Glen Harbor Blvd.

Glendale, AZ 85307

1-800-326-6247

www.conair.com

13AD001388 IB-12591

LIMITED TEN YEAR WARRANTY

Conair will repair or replace, at our option, your appliance free of charge for 120

months from the date of purchase if the appliance is defective in workmanship

or materials.

To obtain service under this warranty, return the defective product to the service

center listed below that is nearest you, together with your sales slip and $5.00 for

postage and handling. California residents need only provide proof of purchase and

should call 1-800-3-CONAIR for shipping instructions. In the absence of a receipt,

the warranty period shall be 120 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT

LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR

A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH

DURATION OF THIS WARRANTY. Some states do not allow limitations on how

long an implied warranty lasts, so the above limitations may not apply to you.

IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR

CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESS OR IMPLIED, WHATSOEVER. Some states do not allow the exclusion

or limitation of special, incidental, or consequential damages, so the above

limitation may not apply to you. This warranty gives you specific legal rights,

and you may also have other rights which vary from state to state.

Please register this product at: www.conair.com/registration

NOTES

If you step on the scale before “0.0” appears, the scale will not

function properly.

Scale will show “Err” if there is improper foot contact in the body analysis

mode, for instance, when you stand on the scale with socks or shoes on.

Hard or dry skin can prevent you making proper contact with electrodes on

the surface of the scale. Try applying a small amount of moisturizer to your

feet before using the scale.

4. Your current weight will be displayed for a few seconds.

5. Next, the display will show your body fat percentage.

6. Then, the display shows your body water percentage.

7. Then, the display shows your bone mass value.

8. Finally, the display shows your Body Mass Index (BMI) score.

9. The LCD will display "BODY FAT, BODY WATER, BONE MASS AND BMI" again

and then turn off automatically.

Customizing Your Body Analysis Monitor

This scale can be customized for up to 4 users. While the customization process is

not difﬁ cult, it may be easiest to read all the instructions ﬁ rst to familiarize yourself

with them. Then keep the instruction manual handy as you go through the process

step by step.

Buttons: USER, SET, Up and Down arrows

1. To set your user data

Tap the scale to turn it on and wait until "0.0" appears.

2. Setting the user number

Press the “Set “button. The number “P-01” will appear and blink. Use the Up/Down

button to select a user number (P-01 to P-4). Press SET to conﬁ rm.

3. Setting the height

Next, the inch or cm symbol lights up (if switch is set to lb, default is height in inches;

if switch is set to KG, default is height in cm). Press the up or down arrows to adjust

the height. Pressing and holding either the up or the down arrow will advance

numbers quickly. Press SET to accept the height. Scale enters the age setting mode.

4. Setting the age

“AGE” appears and the default age "25" ﬂ ashes. Press the up or down arrows to

adjust the age and press SET to conﬁ rm. The scale enters the gender setting mode.

5. Setting the gender

A gender icon ﬂ ashes. Press the up or down arrows to choose between male and

female gender. Press SET to conﬁ rm.

6. Displaying and storing data

Once gender is set, data storage is complete. Scale will display your stored data:

User number, Height and Age will each show for a few seconds.

7. "0.0" will show on the display. The scale is ready for use. Or, you can let the

display turn off automatically after a few seconds and use it later.

Body Analysis

1. Operate the scale on a secure ﬂ at ﬂ oor. Tap the scale sharply and ﬁ rmly and wait

till “0.0” appears. Press the user button to switch to body analysis mode and then

press the user button repeatedly until your user

number shows on display.

Stored data for your user number appears (User number, Height, and Age) then 2.

the scale displays “0.0”.

3. Step on the scale barefoot with your feet aligned on the electrodes (metal strips)

on both sides of the platform. Note: you must be barefoot in order for the scale to

read your body analysis measurements.

Congratulations! By purchasing this Weight Watchers® Scale,

you’ve made the first step toward taking control of your weight.

To get the greatest benefit from your purchase, please read this

entire brochure before using your scale.

Ins

nst

tru

ruct

ctions

ions

Instructions

for

use

for use of

Bod

ody

Glass Body

aly

lysis

sis

Sca

Analysis Scale

Scales by ™

Model WW701

FCC Markings:

Warning: Changes or modiﬁ cations to this unit not expressly approved by

the party responsible for compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that

may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for

a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is

no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modiﬁ cations not expressly approved by Conair

Corporation, the manufacturer of this product and the party responsible for

compliance could void the user’s authority to operate the equipment.

ww701_13ad001388_ib_nal.indd 1-6

ww701_13ad001388_ib_nal.indd 1-6ww701_13ad001388_ib_nal.indd 1-6 1/6/14 11:39 AM

1/6/14 11:39 AM

1/6/14 11:39 AM1/6/14 11:39 AM

BMI – What Is It?

BMI stands for Body Mass Index, a statistical term derived from height and weight.

It is closely linked to body fat and health outcomes. Over 50 organizations,

including the US Government and the World Health Organization, have adopted

BMI guidelines. BMI is inversely related to fitness, meaning that the higher your

BMI, the less likely you are to be fit. Every time your body analysis monitor reads

your weight and calculates your body fat, it also calculates your BMI. Along with

your weight and your body fat measurements, the BMI reading gives you yet one

more tool to monitor your health and fitness.

Body Water/Hydration Levels

General health standards indicate that one should consume approximately

64 oz of water per day from food and liquids to maintain a healthy level of

hydration. Maintaining a good hydration level will help improve your overall health

and general feeling of well-being. If your hydration levels are lower than average,

you should increase your water intake accordingly.

Body water/hydration level – how is it measured?

The hydration level is measured by using Bioelectric Impedance Analysis (BIA).

The same analysis that is used to calculate your body fat is used to calculate your

hydration level. Taking into consideration a user’s age and gender, a calculation is

made that determines the percentage of water.

Please note: It is not recommended to take the hydration measurements in

certain situations, such as following exercise, after drinking a glass of water, or

directly prior to, during or shortly after menstrual cycles. Hydration may not be

at normal levels during these times.

Bone Mass – What Is It?

Bone is a living, growing tissue. During youth, your body makes new bone

tissue faster than it breaks down older bone. In young adulthood, bone mass is

at its peak; after that, bone loss starts to outpace bone growth, and bone mass

decreases. But it’s a long and very slow process that can be slowed down even

more through calcium-rich diets and weight-bearing exercise.

Who should monitor bone mass?

Most people have no need to monitor bone mass, but certain groups –

post-menopausal women, men and women with certain diseases, and anyone

who takes medications that affect bone tissue – might want to watch for

decreases in bone mass. The bone mass reading is to be used as a guide only.

Watch for trends over time and contact your healthcare provider for a more

detailed explanation of the readings and with any questions or concerns.

Weight and Body Fat

How does it work?

While body fat can be measured in many ways, the method used in your scale

is bioelectrical impedance. This indirect method of determining body fat starts when

a safe and very low electrical current is sent through the lower half of the body.

The electrical current flows more quickly through water and muscle than it will

through bone and fat. The scale measures the speed of the current. Based on this

number, the scale estimates body fat using a multi-step, mathematical formula.

Is it accurate?

Measurements of body fat tend to fluctuate a lot more than simple weighing,

and different methods of estimating body fat yield very different results. Just as

different scales give different results, different body fat analyzers can provide

very different body fat estimates. Even with the same scale the numbers will

vary because:

• Weight loss tends to produce substantial, continuous, and unpredictable changes

in body water content. Because body fat analysis is determined by water content

in the body, results can vary considerably from day to day.

• Hydration status affects body fat results. If you’ve just worked out, there is less

water for the electrical current to flow through. This may result in a higher body

fat result. In the same way, if you measure your body fat after drinking a lot of

fluid, it may appear that body fat is lower than it really is.

• Skin temperature can have an influence also. Measuring body fat in warm humid

weather when skin is moist will yield a different result than if skin is cold and dry.

• As with weight, when your goal is to change body composition it is better to track

trends over time than to use individual daily results.

• Results may not be accurate for persons under the age of 16, or persons with

an elevated body temperature, diabetes or other health conditions.

What you need to know!

• Percent body fat refers to the number of pounds of fat divided by your total body

weight and multiplied by 100.

• During weight loss, percent body fat doesn’t appear to be reduced as quickly

as expected because total weight loss and total body fat are decreasing at the

same time (for a more detailed explanation, see next section).

• Weight loss in the form of body fat and lean tissue (muscle) is common, and

is normal.

• To minimize the loss of lean tissue, include regular physical activity, especially

strength training, in your weight-loss plan.

Why do I lose weight but my body fat percentage doesn’t change much?

When you lose weight, both the numerator (pounds of body fat) and denominator

(total body weight) go down, so when it’s calculated as a body fat percentage, the

number can be small. For example, a person may weigh 200 pounds and have 40%

body fat (= 80 pounds of body fat). He/She loses 20 pounds, but the body fat has

only dropped 4% to 36%. Yet, that 4% of body fat was 16 pounds of fat – a very

significant amount! So do not be overly concerned if you do not see the percentage

change quickly as you are losing weight: monitor the absolute number of body fat

pounds lost. Remember, to minimize the loss of lean tissue, include regular physical

activity, especially strength training, in your weight-loss plan.

Don’t Overdo It!

A surefire way to get overly concerned with your weight is to weigh yourself too

often. We generally recommend weighing yourself no more than once a week

when you’re dieting. Though it’s hard to stick to this pattern, it’s the best way to

prevent unnecessary concern with normal weight fluctuations, which are unrelated

to your weight-loss efforts. Regardless of your weighing habits, it’s important that

you’re consistent.

Here are 5 rules for effectively monitoring your weight – weigh yourself:

To keep track of your weight, record only one number for the week.

This will give you a clear picture of any trend your weight is following.

When You’re Maintaining Weight

Fluctuations in day-to-day weight tend to be smaller when weight is stable,

so a more frequent weigh-in pattern is helpful. To maintain a stable weight:

• Weigh yourself more often than once a week.

• Use the “5-pound rule” – research shows that people who keep weight

within a 5-pound range are more likely to maintain a healthy body weight

over the long term.

Facts You Should Know

Your Weight Watchers scale is a precise measuring instrument that is most

accurate when weighing a stationary object. To ensure accurate readings,

always try to stand on the same area of the scale platform and DO NOT MOVE.

Should the weight on the scale exceed the scale’s capacity, you may see an error

message ”ERR”.

Electronic sensors are sensitive. Be careful not to drop or jar the scale.

Place it gently onto floor surface, and store where it will be protected from impact.

The scale is an electronic instrument and should never be submerged in water.

Clean with damp cloth and/or glass cleaner.

In the event that the scale battery needs to be replaced, (display shows "Lo"),

remove the screw from the battery cover on the bottom of the scale and remove

the cover. Replace the old battery with a new CR2032 battery. Clean the

battery contacts and also those of the device prior to battery installation. Ensure

the battery is installed correctly with regard to polarity (with the "+" side facing up),

then replace the battery cover and tighten the screw. Remove battery from

equipment that is not to be used for an extended period of time. Remove used

battery promptly. Dispose of the old battery properly. Do not attempt to open

the scale or to remove any components. Servicing should be done by qual-

ified technicians only. See warranty information below.

• Once a week

• On the same day of the week

• At the same time of day

• In the same place

• Wearing the same clothes

• Using the same scale

Before Using Scale

Precautions for Use

CAUTION! Use of this device by persons with any electrical implant such

as a heart pacemaker, or by pregnant women, is not recommended.

Please consult your physician should you have any questions about the use

of this product in relation to any condition you may have, or treatment you

may be receiving.

1. Remove all packaging materials.

2. Remove the isolator tab from the battery compartment – without opening the

battery cover at the bottom of the scale, gently pull out the isolator tab. In case the

tab cannot be pulled out, if it does not completely pull out or if the display does not

light up when you tap the scale, remove the screw from the battery cover, remove

the cover and gently pull out the isolator tab. Ensure the battery is installed correctly

and then replace the battery cover and tighten the screw.

3. For best accuracy, place scale on tile or hardwood ﬂ oor, rather than uneven,

ﬂ exible or soft ﬂ ooring (such as carpet).

Using the Weight Only Mode

Instructions for customizing your Weight Watchers Body Analysis scale are below.

However, the scale does not need to be programmed to operate as a simple

weigh scale.

1. Tap the scale with your foot to turn it on. The display will light up.

2. When scale display is on, set switch on the base of the scale for measuring in

pounds (lb) or kilograms (kg).

3. Wait until all digits light for several seconds and “0.0” appears.

4. Step on the scale and stand still to measure your weight.

5. The weight reading stays lit for several seconds. Then the scale will shut

off automatically.

Body Analysis Table

Always keep in mind that you know your body best. The following ranges of body

fat, BMI, body water and bone mass are offered as guides.

low on target high

BMI <20 20-25 25+

Body Fat

age % % %

Male 20-29 <13% 13-23% 23.1%+

30-39 <14 14-24 24.1+

40-49 <15 15-25 25.1+

50-59 <16 16-26 26.1+

60-69 <17 17-27 27.1+

Female 20-29 <18 18-28 28.1+

30-39 <19 19-29 29.1+

40-49 <20 20-30 30.1+

50-59 <21 21-31 31.1+

60-69 <22 22-32 32.1+

Body Water

age % % %

Male 20-69 <50% 50-65% 65%+

Female 20-69 <45 45-60 60+

Bone Mass

age % % %

Male 20-29 <7.6% 7.6-8.4% 8.5%+

30-39 <7.4 7.4-8.2 8.3+

40-49 <7.0 7-7.8 7.9+

50-59 <6.6 6.6-7.4 7.5+

60-69 <6.3 6.3-7.1 7.2+

Female 20-29 <6.2% 6.2-7% 7.1%+

30-39 <6.0 6-6.8 6.9+

40-49 <5.6 5.6-6.4 6.5+

50-59 <5.2 5.2-6 6.1+

60-69 <4.9 4.9-5.7 5.8+

Make the most of it!

To summarize, make the most of the body analysis feature by:

• Tracking change over time and not day to day.

• Using the same scale as much as possible.

• Being extra-consistent in the time of day, day of the week, time before or after

food and fluid consumption, before or after exercise, etc., when measuring

body composition.

Come to a meeting and learn from us the best way to lose and maintain

weight. Call 1-800-651-6000 or go to WeightWatchers.com to find a

meeting near you.

Important Information Concerning

Weight Management

Your scale is the best tool for monitoring weight. While not the only measure

of weight loss, scales are the most popular method used to gauge weight-loss

success. A scale measures the sum of your total body weight, which includes

bone, muscle, fat, and water.

Body weight fluctuates during the day, and from day to day,

depending on a variety of factors.

• Salt and carbohydrate intake can affect the body’s water retention.

• A large meal adds weight and can cause water retention.

• Dehydration from exercise, illness, or low fluid intake can result in weight loss.

• Muscle is also a factor. Heavy-duty resistance training can build muscle,

which can affect weight.

• The menstrual cycle can cause temporary weight gains and losses.

When You’re Losing Weight

It’s important not to put too much stock in the exact number on the scale,

because it can and will vary. This is especially true when you’re dieting. Small

weight gains and losses are common as your body adjusts to fewer calories and

more exercise. Your scale is a valuable tool when used to track weight over a

period of weeks and months. Be aware that different scales often give different

results. The scale at your doctor’s office may show one weight, and your scale at

home another. So don’t get too caught up with a single number.

ww701_13ad001388_ib_nal.indd 7-12

ww701_13ad001388_ib_nal.indd 7-12ww701_13ad001388_ib_nal.indd 7-12 1/6/14 11:39 AM

1/6/14 11:39 AM

1/6/14 11:39 AM1/6/14 11:39 AM

Specyfikacje produktu

Marka:	Conair
Kategoria:	Libra
Model:	Weight Watchers WW701

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Conair Weight Watchers WW701, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Libra Conair

Conair WW Scales WW721ZF Instrukcja

9 Października 2024

Conair Thinner TH100PSSL Instrukcja

9 Października 2024

Conair Thinner TH280 Instrukcja

8 Października 2024

Conair Thinner TH106 Instrukcja

8 Października 2024

Conair Thinner TH310Z Instrukcja

8 Października 2024

Conair WW204WGBZ Instrukcja

8 Października 2024

Conair Thinner TH322 Instrukcja

8 Października 2024

Conair WW712XF Instrukcja

8 Października 2024

Conair Care CN600 Instrukcja

8 Października 2024

Conair WW31X Instrukcja

23 Września 2024

Instrukcje Libra

Najnowsze instrukcje dla Libra

Adler AD 8183 Instrukcja

15 Października 2024

Adler AD 8182 Instrukcja

15 Października 2024

Camry EF933 Instrukcja

10 Października 2024

Withings Body Scan Instrukcja

9 Października 2024

Gallet PEP712 Instrukcja

9 Października 2024

Withings Body Scan WBS08 Instrukcja

9 Października 2024

Orbegozo PB 2236 Instrukcja

9 Października 2024

Mebby Primi Pesi Instrukcja

9 Października 2024

Mebby Baby & child Instrukcja

9 Października 2024

Medel Digital Instrukcja

9 Października 2024