Instrukcja obsługi Comark RF300

Comark Sprzęt pomiarowy RF300

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Comark RF300 (52 stron) w kategorii Sprzęt pomiarowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/52
RF300 Instruction Manual
RF300 Software Instructions 1
Page No. Section No. Title
2Section 1.0 System Set-Up
3Section 1.1 PC Vs Cloud Data Storage
4Section 2.0 Data Logger and Network Set-Up
7Section 2.1 Advanced Network Configuration
8Section 2.2 General Settings For PC Set-Up
12 Section 2.3 PC Storage Set-Up Completion
13 Section 3.0 Viewing Devices On The PC
14 Section 3.1 Data Logger Status and Properties
15 Section 3.2 Data Logger Sessions
17 Section 3.3 Graphing Data
28 Section 3.4 Saving & Exporting Data
21 Section 4.0 Data Logger Management
23 Section 4.1 Adjusting Data Logger Settings
26 Section 4.2 Muting & Resetting Alarms
27 Section 4.3 Deleting A Data Logger
28 Section 5.0 Viewing Previously Saved Data
26 Section 6.0 Signing into a Cloud Account
28 Section 6.1 Data Logger and Cloud Set-Up
31 Section 6.2 General Settings for Cloud Set-Up
32 Section 6.3 Viewing Data Loggers on Cloud
33 Section 6.4 Add New Data Logger on Cloud
37 Section 6.5 Viewing Cloud Data and Graphs
40 Section 6.6 Event Logs
42 Section 6.7 Resetting Alarms
43 Section 7.0 LCD Icons
44 Section 7.1 Data Logger Screens
45 Section 7.2 Battery Life & Charging
46 Section 7.3 Reset & Factory Restore
47 Section 7.4 Firmware Updates
51 Section 8.0 Enterprise Network
52 Appendix 1 RF300 Email to SMS/Text Service (US only)
Contents
Part No. 20308-2
RF300 Instruction Manual 2
Section 1.0 System Set-Up
B
Ensure that you have the following:
System Set-Up
You will need the SSID and password for the wireless network. The
password is sometimes referred to as the passphrase or passkey
and often found on the rear of the wireless router.
Download and install the free WiFi Sensor software from
www.comarkinstruments.com/software or
www.comarkusa.com/software.
Make sure you ‘allow’ any security access highlighted by your
Firewall or Antivirus program. Your system may automatically
request this.
When you have installed the software an icon will be placed on
your desktop.
WiFi Data Logger Micro USB Cable Router or
Access Point
PC or Laptop
(running Windows 7 or
above)
1
2
3
4
RF300 Instruction Manual 3
Section 1.1 PC Vs Cloud Data Storage
Data Storage Choices
PC Data Storage
Cloud Data Storage
There are two data storage choices for your WiFi monitoring system; on the PC or on the
Cloud.
With PC data storage all your data is stored locally on your PC. All data is kept within your
local network and no internet connection is required.
To store data from your data loggers on your PC please click ‘On This PC‘ during the set-up
process. Please turn to Section 2.0 for detailed instructions for setting up your data loggers
for PC storage.
Hint / Tip:
The PC and the logger MUST be on the same part of the network.
The software must be running for the data logger to send data to it. Should the software be closed accidentally
or it shuts down (this will happen when the PC goes into sleep mode) the loggers will go into hibernation mode
and retain their data until the software is opened again. The loggers will indicate they have lost connection by
the antenna flashing. It may take a full transmit period to reconnect the logger to the PC software and then
a number of hours to fully download the recorded data. This will depend on how long the device has been
disconnected. It is important to know that while disconnected alarms will not be received by the software and
the USER will be unaware of them.
With Cloud data storage all your data is stored remotely on our secure servers . Data is
transferred to our servers through the internet and is then accessible from anywhere via a
web browser on any internet enabled data logger.
To store data from your data logger(s) on the Cloud please click ‘On The Cloud‘ during the
set-up process. Please turn to Section 6 for detailed instructions for setting up your data
logger(s) on the Cloud.

Specyfikacje produktu

Marka: Comark
Kategoria: Sprzęt pomiarowy
Model: RF300

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Comark RF300, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Sprzęt pomiarowy Comark

Comark

Comark RF300 Instrukcja

25 Września 2024
Comark

Comark N2013 Instrukcja

21 Września 2024
Comark

Comark RF613 Instrukcja

20 Września 2024

Instrukcje Sprzęt pomiarowy

Najnowsze instrukcje dla Sprzęt pomiarowy

Stamos

Stamos S-LS-28 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-86 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-61 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-81 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-84 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-74 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-76 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-42 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-75 Instrukcja

15 Października 2024
Stamos

Stamos S-LS-35 Instrukcja

15 Października 2024