Instrukcja obsługi COLBOR PB74

COLBOR Niesklasyfikowane PB74

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla COLBOR PB74 (7 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Power Base User Manual
PB74
Caring For Your COLBOR Product
· Please keep the product in a dry, clean, dust-free environment.
· Keep corrosive chemicals, liquids, and heat sources away from the
product to prevent mechanical damage.
· Use only a soft and dry cloth for cleaning the product.
· Malfunction may be caused by dropping, the impact of external force.
· Do not attempt to disassemble the product. Doing so voids the
warranty.
· Please have the product checked or repaired by authorized
technicians if any malfunctions happen.
· Please remove the USB charging cable when the battery is fully
charged.
· The product might get hot during use, which is normal. Please allow a
certain space for the heat sink when using it.
· If you do not use the product for a long time, it might not be able to
turn on instantly due to the dead battery. Please charge the product
and it can resume work. Please charge the product every 3 months
regularly.
· Failure to follow all the instructions may result in mechanical damage.
· Warranty does not apply to human errors.
Product Instructions
① Power Contacts
② On/O & Battery Indicator Toggle
③ 1/4’ Screw
④ 1/4’ Screw Locking Wheel
⑤ Type-C Charging/Power Port
⑥ Remaining Battery Indicator
45W 25W
20W
45W
Operation Instructions
Please use the single-port fast charger which supports a voltage of
20V and an output power of PD45W or higher.
* According to USB-IF, only fast chargers with PD45W or higher can
provide a 20V output. Chargers with less than PD45W cannot charge
the PB74.
* PB74 is only compatible with the W60/W100 series lights.
1). Ensure PB74 is o before installation, and only turn it on after
locking it with the light.
2). Align the power contacts and 1/4' screw at the top of PB74 with
the power port and 1/4' screw hole on the light, and rotate the 1/4'
1. Charging
2. Installation and Removal
* If charging the PB74 and multiple devices via the multi-port fast
charger simultaneously, it will reduce the output power and lead to
lower charging eciency for the PB74.
* Please use the included 60W Type-C cable or a Type-C cable that
supports 60W power transmission for charging, otherwise, it will reduce
the charging eciency.
* Do not use the Type-C cable that with the power adapter to
charge the PB74 to avoid overcharging, which could lead to battery
overheating, swelling, or even catching on re.
screw locking wheel. Ensure
the lock is fastened before
turning it on.
To remove the battery,
rotate the wheel in the
opposite direction.

Specyfikacje produktu

Marka: COLBOR
Kategoria: Niesklasyfikowane
Model: PB74

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z COLBOR PB74, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane COLBOR

COLBOR

COLBOR Power 99 Pro Instrukcja

16 Grudnia 2024
COLBOR

COLBOR PB74 Instrukcja

16 Grudnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SKROSS

SKROSS PRO – World & USB Instrukcja

17 Grudnia 2024
SKROSS

SKROSS World Adapter Pro+ Instrukcja

17 Grudnia 2024
IFM

IFM TAD181 Instrukcja

17 Grudnia 2024
IFM

IFM TAD091 Instrukcja

17 Grudnia 2024
IFM

IFM TAD961 Instrukcja

17 Grudnia 2024
IFM

IFM TAD981 Instrukcja

17 Grudnia 2024
Turbosound

Turbosound TSTAND-01 Instrukcja

17 Grudnia 2024
Turbosound

Turbosound TPOLEAJ-01 Instrukcja

17 Grudnia 2024
Nedis

Nedis BTSM1GY Instrukcja

17 Grudnia 2024
Nedis

Nedis POCO106 Instrukcja

17 Grudnia 2024