Instrukcja obsługi Cocraft XAGD50


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft XAGD50 (40 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Important:
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HB18
ADJUSTABLE IMPACT DEPTH
40-7980
NAIL GUN
SPIKPISTOL T-DYCKERT SPIKERPISTOL
NAULAIN T-DYCKERT STAUCHKOPFNAGLER
Ver. 20180614
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
40-7980 XAGD50
10 50mm
ENGLISH
3
T-Brad Nail Gun
Art.No 40-7980 Model XAGD50
Please read theentire instruction manual before using theproduct and save it
for future reference. We reserve theright for any errors in text or images and any necessary
changes made to technical data. If you have any questions regarding technical problems please
contact Customer Services.
Safety
Warning:
Never hold your hand or any other part of yourbody close to the muzzle of the nail gun when
thegun is connected with thecompressed air hose.
Never point thetool at any person or animal.
Do not play with thetool.
Never depress thetrigger if thenose of thetool is not pointed at theworkpiece.
Always handle thetool with care.
Never depress thetrigger or release thesafety catch while you are loading thetool.
Use thetool solely for thepurpose for which it is intended.
Never use thetool in such away that it is pointed at yourself or someone else in thework area.
Do not use thetool as ahammer.
Carry thetool by thehandle, not by theair hose.
Never carry thetool with thetrigger depressed.
Never modify thetool in departure from theoriginal design.
Always keep in mind that misuse or faulty handling of this tool could injure yourself and others.
Never fasten or tape thesafety catch and/or trigger in activated position.
Never leave atool unattended when it is connected to theair line.
Do not use this tool if it does not bear alegible warning decal.
Do not continue using atool that is leaking air or is not working properly. Contact our
Customer Service for servicing.
When using thetool, hold it in such away that no injury to thehead or body could result
should afall in pressure or hard spots on theworkpiece cause therecoil force to increase.
Do not nail too close to theedge of aworkpiece. Thenail could pass through theworkpiece
and cause damage.
Disconnect thetool from thecompressed air for transporting.
Check frequently that both thetrigger and thesafety catch are working properly.
Do not take apart any part of thetool.
Make no provisional repairs.
Always have authorized personnel do servicing and repairs, and only with original spare parts.
Avoid weakening thehousing by engraving or scratching it, etc.
Always make anote of where theelectric cable goes into walls, floors or ceilings before you
begin to use thenail gun.
Thecompressed air fitting for thenail gun must be of thequick-coupling type. Theconnecting
piece on thetool may not have arear valve so that some air remains under pressure when
thenail gun has been disconnected.


Specyfikacje produktu

Marka: Cocraft
Kategoria: nieskategoryzowany
Model: XAGD50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cocraft XAGD50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Cocraft

Cocraft

Cocraft XAGD50 Instrukcja

12 Czerwca 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024