Instrukcja obsługi Cocraft HL 2500

Cocraft dmuchawa do liści HL 2500

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft HL 2500 (64 stron) w kategorii dmuchawa do liści. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/64
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Ver. 20180427
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
18-4664 BV2503E
31-9050 BV2503E
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HL 2500
18-4664 31-9050∙
LEAF BLOWER/VACUUM
LÖVSUG/LÖVBLÅS
LØVSUGER/LØVBLÅSER
LEHTIPUHALLIN/LEHTI-IMURI
LAUBSAUGER/-BLÄSER
LEAVES CHOPPED TO 10:1 & COLLECTED IN THE 45 L LEAF BAG
ENGLISH
2
2500 W Leaf Blower Vac
Art.no 18-4664 Model BV2503E
31-9050 BV2503E
Please read theentire instruction manual before using theproduct and then save
it for future reference. We reserve theright for any errors in text or images and any
necessary changes made to technical data. If you have any questions concerning
technical problems please contact our Customer Services.
Safety
General Safety Instructions
Warning: Read all theinstructions.
Failure to adhere to thefollowing instructions may lead to electric shocks, fires and/or
serious injury.
SAVE THESE INSTRUCTIONS.
Theterm “power tool” in thefollowing text refers to your handheld mains operated or
battery operated tool.
1) Work area safety
a) Cluttered and poorly lit areas Keep thework area clean and well illuminated.
invite accidents.
b) Do not use power tools in explosive environments, such as in thepresence
of flammable liquids, gases or dust. Power tools create sparks which may ignite
dust or fumes.
c) Keep children and other bystanders away from thearea where you are using
thepower tool. Distractions can cause you to lose your concentration and control.
2) Electrical safety
a) Theplug of thepower tool must fit correctly into thewall socket. Never modify
theplug in any way. Never use anadaptor plug together with earthed power
tools. Unmodified plugs and matching outlets will reduce therisk of electric shocks.
b) Avoid physical contact with earthed objects such as pipes, radiators, ovens
and refrigerators. There is anincreased risk of electric shock if your body is earthed.
c) Water entering Do not expose thepower tool to rain or other wet conditions.
apower tool will increase therisk of electric shock.
d) Do not abuse themains lead. Never use thelead for carrying, pulling or
unplugging thepower tool. Keep thelead away from heat, oil, sharp edges
and moving parts. Damaged or tangled leads increase therisk of electric shock.
ENGLISH
3
e) When using power tools outdoors, use anextension lead that is suitable for
this purpose. Theuse of anextension lead designed for outdoor use decreases
therisk of electric shocks.
f) If theuse of thepower tool in awet environment is unavoidable, awall
socket equipped with aresidual current device (RCD) should be used.
Theuse of anRCD (with atripping current of 30mA and which trips within 30ms)
significantly reduces therisk of electrocution.
3) Personal safety
a) Pay attention to what you are doing and use common sense when using
power tools. Never use power tools if you are tired or under theinfluence of
drugs, alcohol or medication. One moment of inattention while using apower
tool may result in aserious injury.
b) Wear protective clothing. Always wear safety glasses. Using protective
clothing such as dust masks, non-slip safety shoes, helmets and ear defenders
decreases therisk of injury.
c) Avoid accidental starts. Make sure that thepower switch is set to OFF before
plugging thepower tool into awall socket, fitting thebattery or picking up/
carrying thepower tool. Carrying apower tool with your finger on thepower
switch/trigger or connecting thepower tool to awall socket when thepower
switch is set to ON is inviting anaccident.
d) Aservice Remove all service tools/keys before switching on thepower tool.
tool left on arotating part of thepower tool may result in personal injury.
e) Do not overreach. Keep proper footing and balance at all times. This enables
better control of thepower tool in unexpected situations.
f) Wear suitable clothing. Do not wear loose-fitting clothing or jewellery.
Keep hair, clothes and gloves away from moving parts. Loose-fitting clothes,
jewellery or long hair could become caught in moving parts.
g) If equipment for theextraction and collection of dust is available, make sure
it is connected and used properly. Use of dust collection equipment can reduce
dust related hazards.
4) Use and maintenance of the power tool
a) Do not force thepower tool. Use thecorrect power tool for your application.
Thecorrect power tool will do thejob better and safer if used at therate for which
it was designed.
b) Never use thepower tool if thepower switch does not switch thetool on
and off properly. Any power tool that cannot be controlled by thepower switch is
dangerous and must be repaired.
c) Unplug thelead from thewall socket or remove thebattery before making
any adjustments, changing accessories or storing thepower tool. These
precautions reduce therisk of thepower tool starting unexpectedly.
d) Store power tools that are not being used out of children’s reach. Do not
allow people who are unfamiliar with thetool or these instructions to operate
thetool. Power tools are dangerous in thehands of untrained users.

Specyfikacje produktu

Marka: Cocraft
Kategoria: dmuchawa do liści
Model: HL 2500

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cocraft HL 2500, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje dmuchawa do liści Cocraft

Cocraft

Cocraft HL 2500 Instrukcja

20 Sierpnia 2024
Cocraft

Cocraft PRO LB36-T Instrukcja

20 Sierpnia 2024

Instrukcje dmuchawa do liści

Najnowsze instrukcje dla dmuchawa do liści

Ozito

Ozito PXBVS-018 Instrukcja

5 Stycznia 2025
RYOBI

RYOBI RY404012 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI RY404015 Instrukcja

4 Stycznia 2025
Milwaukee

Milwaukee M18 Fuel 3017-21HD Instrukcja

3 Stycznia 2025
Gardenline

Gardenline GLLS 2501 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLLS 2506 Instrukcja

29 Grudnia 2024
EGO

EGO LB5301E Instrukcja

28 Grudnia 2024
EGO

EGO SNT2400E-K2753 Instrukcja

28 Grudnia 2024
Prowork

Prowork PG-EL 2450 E Instrukcja

26 Grudnia 2024
Prowork

Prowork PG-EL 2150 Instrukcja

26 Grudnia 2024