Instrukcja obsługi Cocraft HH 500-L

Cocraft nożyce do żywopłotu HH 500-L

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cocraft HH 500-L (48 stron) w kategorii nożyce do żywopłotu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/48
49 cm
ENGLISHSVENSKANORSKSUOMIDEUTSCH
Ver. 20170210
Original instructions
Bruksanvisning i original
Originalbruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
Art.no Model
18-4760 HTEG48B-550
31-9409 HTEG48B-550
Important!
Read the entire instruction manual
carefully and make sure that you fully
understand it before you use the
equipment. Keep the manual for future
reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den
innan du använder utrustningen. Spara
bruksanvisningen för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre
deg om at du forstår dem, før du tar
produktet i bruk. Ta vare på anvisningene
for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin
alat käyttää laitetta. Säilytä ohjeet
myöhempää tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung sorgfältig
durchlesen und aufbewahren.
HH 500-L
500 W
18-4760 • 31-9409
HEDGE TRIMMER
HÄCKSAX HEKKSAKS
PENSASLEIKKURI HECKENSCHERE
DUAL-ACTION BLADES
ENGLISH
2
500 W Hedge Trimmer
Art.no 18-4760 Model HTEG48B-550
31-9409 HTEG48B-550
Please read theentire instruction manual before using theproduct and then save
it for future reference. Wereserve theright for any errors in text or images and any
necessary changes made to technicaldata. Intheevent of technical problems or other
queries, please contact our Customer Services (see address details on theback).
Safety
General safety instructions for power tools
Warning: Readall theinstructions. Failure to adhere to thefollowing instructions may
lead to electric shocks, fires or serious injuries.
SAVE THESE INSTRUCTIONS.
Theterm “power tools” in thefollowing warning text refers to your handheld mains
operated or battery operatedtool.
1) Work area
a) Cluttered and poorly lit areas Keep thework area clean and well illuminated.
invite accidents.
b) Do not use power tools in explosive environments,e.g. near to flammable
liquids, gases ordust. Powertools generate sparks that can easily ignite dust
orfumes.
c) Keep children and other bystanders away from thearea where you are using
thepowertool. Distractions can cause you to lose concentration and control.
2) Electrical safety
a) Thepower tool’s plug must fit correctly into thewall socket. Nevermodify
theplug in anyway. Neveruse anadaptor together with earthed powertools.
Unmodified plugs and suitable wall sockets minimize therisk of electric shocks.
b) Avoid physical contact with earthed objects such as pipes, radiators, ovens
and refrigerators. Thereis anincreased risk of receiving anelectrical shock if your
body is earthed.
c) Ifwater gets Do not expose thepower tool to rain or other wet conditions.
inside thepower tool, it increases therisk of electricshock.
d) Do not abuse themainslead. Neveruse thelead to carry thetool or pull
theplug from awall socket. Keepthelead away from heat, oil, sharp edges
and movingparts. Damaged or tangled leads increase therisk of electricshock.
ENGLISH
3
e) When using power tools outdoors, use anextension lead that is suitable for
such purpose. Theuse of anextension lead designed for outdoor use decreases
therisk of electric shocks.
f) If theuse of thepower tool in awet environment is unavoidable, awall
socket equipped with aresidual current device (RCD) should be employed.
Useof anRCD significantly reduces therisk of electricshock.
3) Personal safety
a) Pay attention to what you are doing and use common sense when using
powertools. Neveruse power tools if you are tired or under theinfluence of
drugs, alcohol or medication. Onemoment of inattention while using apower
tool may result in serious injury.
b) Wear protective clothing. Alwayswear safety glasses. Usingprotective
clothing such as dust masks, non-slip safety shoes, helmets and ear defenders
decreases therisk of injury.
c) Avoid accidental starts. Makesure that thepower switch is set to OFF before
plugging thepower tool into awall socket, fitting thebattery or picking up/
carrying thepowertool. Carrying apower tool with your finger on thepower
switch/trigger or connecting thepower tool to awall socket when thepower
switch is set to ON is inviting anaccident.
d) Remove all service tools/keys before switching on thepowertool.
Aservice tool left on any of thepower tool’s rotating parts may result in injury.
e) Do not overreach. Makesure you stand steady and well balanced at alltimes.
Thisensures better control over thepower tool in unexpected situations.
f) Wear suitable clothing. Donot wear loose-fitting clothing or jewellery.
Keephair, clothes and gloves away from movingparts. Loose-fitting clothes,
jewellery or long hair could become caught in movingparts.
g) If equipment for dust extraction or collecting is available make sure it is
connected and used properly. Usingof theaforementioned technical aids may
decrease therisk of dust related hazards.
4) Use and maintenance of the power tool
a) Do not force thepowertool. Useapower tool suitable for thework you are
about to perform. Theproper power tool will perform thetask better and safer if
used at thecorrect feedrate.
b) Never use thepower tool if thepower switch does not switch thetool on and
off properly. Allpower tools that cannot be controlled by thepower switch are
dangerous and must be repaired.
c) Unplug thelead from thewall socket or remove thebattery before
making any adjustments, changing accessories or storing thepowertool.
Theseprecautions reduce therisk of thepower tool starting unexpectedly.

Specyfikacje produktu

Marka: Cocraft
Kategoria: nożyce do żywopłotu
Model: HH 500-L

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cocraft HH 500-L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nożyce do żywopłotu Cocraft

Cocraft

Cocraft LXC HT18 Instrukcja

16 Września 2024
Cocraft

Cocraft LXC HTP18 Instrukcja

20 Sierpnia 2024
Cocraft

Cocraft HH 500-L Instrukcja

20 Sierpnia 2024
Cocraft

Cocraft LXC HT 18 Instrukcja

20 Sierpnia 2024
Cocraft

Cocraft PRO HL36-S Instrukcja

20 Sierpnia 2024
Cocraft

Cocraft LXC MTG18 Instrukcja

20 Sierpnia 2024

Instrukcje nożyce do żywopłotu

Najnowsze instrukcje dla nożyce do żywopłotu

Dolmar

Dolmar HT-5510 Instrukcja

13 Stycznia 2025
Fieldmann

Fieldmann FZN 1001-A Instrukcja

12 Stycznia 2025
Echo

Echo HC-1500 Instrukcja

7 Stycznia 2025
DeWalt

DeWalt DCHT821 Instrukcja

3 Stycznia 2025
Sun Joe

Sun Joe 24V-HT16-LTE Instrukcja

31 Grudnia 2025
Sun Joe

Sun Joe HJ15HTE Instrukcja

31 Grudnia 2025
Hurricane

Hurricane HHS 580 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 692 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLHT 551 Instrukcja

29 Grudnia 2024
Gardenline

Gardenline GLH 664 Instrukcja

29 Grudnia 2024