Instrukcja obsługi ClimeMET CM7048

ClimeMET Stacja pogodowa CM7048

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ClimeMET CM7048 (12 stron) w kategorii Stacja pogodowa. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/12

-1-

WIRELESS WEATHER STATION

INSTRUCTION MANUAL

PART NO.: CM7048

Page

1. INTRODUCTION ....................................................................................2

1.1 PACKAGE CONTENTS ....................................................................2

1.2 FEATURES ........................................................................................2

2. INSTALLATION ......................................................................................2

2.1 INSTALLING THE BATTERIES ..........................................................2

2.2 MOUNTING ......................................................................................4

2.2.1 BASE STATION............................................................................4

2.2.2 REMOTE SENSOR......................................................................5

3. OVERVIEW ..............................................................................................5

3.1 BASE UNIT-LCD ................................................................................5

3.2 LED BACKLIGHT ..............................................................................6

3.3 WEATHER FORECASTING ..............................................................6

3.4 WEATHER FORECAST TENDENCY INDICATOR............................7

3.5

PRESSURE SENSITIVITY SETTING FOR WEATHER FORECASTING

........7

3.6 STORM WARNING INDICATOR........................................................7

4. PROGRAM MODE ..................................................................................7

4.1 TIME MODE ......................................................................................8

4.2 INDOOR TEMPERATURE & HUMIDITY MODE ..............................9

4.3 OUTDOOR TEMPERATURE MODE ..............................................10

5. TROUBLESHOOTING ..........................................................................10

6. SPECIFICATION ..................................................................................11

This Operation Manual is part of this product and should be kept in a safe

place for future reference. It contains important notes on setup and operation.

85119 Wireless Weather Station Manual_85119 Wireless Weather Station Man

-2-

1. Introduction

Thank you for purchasing this Wireless Weather Station. Designed for

everyday use, the weather station will prove to be an asset of great

value for your personal use in the home or office. Please read this

instruction manual thoroughly to fully understand the correct operation

of your weather station and benefit from its unique feature.

1.1 Package Contents

• 1 x Weather station base unit

• 1 x remote Sensor with mounting bracket

• Mounting Screws

• Instruction manual

1.2 Feature

1) Indoor humidity (%RH)

2) Wireless outdoor and indoor temperature (°F or °C)

3) Records min. and max. humidity

4) Records min. and max. temperature

5) Weather forecast tendency

6) Forecast icons based on changing barometric pressure

7) Radio controlled time and date with manual setting option

8) Time Zone Setting

9) 12 or 24-hour time display

10) Perpetual calendar

11) Time alarm

12) Can receive up to 3 sensors

13) LED backlight

14) Wall hanging or free standing

15) Included one transmitter

16) Synchronized instant reception

17) Low battery indicator on the receiver

2. Installation

2.1 Installing the Batteries

Note: Please note the polarity when inserting/replacing batteries in

the unit, failure to do so may result in permanent damage. Use good

quality Alkaline Batteries and avoid rechargeable batteries.

85119 Wireless Weather Station Manual_85119 Wireless Weather Station Man

-3-

1) Insert two AAA batteries into the remote sensor. After the remote

sensor is powered up, the sensor will transmit weather data every 8s

for 16 times. After this learning period is over, then the transmitter will

transmit every 48s.

2) Insert two AA batteries into the weather station. When the base

station is powered up, a short beep will sound and all LCD segments

will light up for about 4 seconds before it enters into learning mode

to learn the sensors security code. Every time the remote sensor

is powered up (for example after a change of batteries), a random

security code is transmitted and this code must be synchronized with

the base station to receive weather data. Thus if battery change

happened on remote sensor side, then the base station must be

powered up again to re-Iearn the transmitter.

3) Wait 3 minutes or until the outdoor temperature is displayed in the

weather station. Do not press any keys before outdoor sensor

data received. The wireless weather station can receive up to 3

temperature sensors. If you have purchased additional remote

sensors, repeat step 1) for all extra sensors. However, ensure that

you leave 10 seconds in between the reception of the last sensor and

the set-up of the following sensor. The wireless weather station will

number the sensors in the order of set-up, i.e. the first temperature

sensor will have the temperature displayed with CH1. If you only have

one sensor, won't be displayed.CH1

4) After the learning mode, the base station will start the radio controlled

time reception. The receiver will start RCC time reception period for

10 minutes maximum, and no weather data will be received during

this period of time. If RCC signal can't be synchronized with the

base station within 1 minute, the signal search will be cancelled and

will automatically resume every hour on the hour until the signal is

successfully captured. Regular RF link will be established once RCC

reception routine is finished.

5) Mount the units, ensuring that the receiver can still pick up the signal

from the transmitter. To measure outdoor temperature, place the

transmitter outdoors. It will transmit the temperature from its location.

85119 Wireless Weather Station Manual_85119 Wireless Weather Station Man

Specyfikacje produktu

Marka:	ClimeMET
Kategoria:	Stacja pogodowa
Model:	CM7048

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ClimeMET CM7048, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Stacja pogodowa ClimeMET

ClimeMET CM7048 Instrukcja

3 Października 2024

ClimeMET CM2026 Instrukcja

3 Października 2024

ClimeMET CM7 Instrukcja

3 Października 2024

ClimeMET CM2016 Instrukcja

3 Października 2024

ClimeMET CM2000 Instrukcja

3 Października 2024

Instrukcje Stacja pogodowa

Najnowsze instrukcje dla Stacja pogodowa

Ascot GT-WS-07s Instrukcja

15 Stycznia 2025

Ventus K0382 Instrukcja

14 Stycznia 2025

TFA 20.1082.17 Instrukcja

12 Stycznia 2025

Oregon Scientific BAR310HG Instrukcja

12 Stycznia 2025

Auriol AHFL 433 B2 Instrukcja

12 Stycznia 2025

Oregon Scientific BAR 898 Instrukcja

11 Stycznia 2025

Davis Weatherlink Touch Console Instrukcja

11 Stycznia 2025

Taylor 5156 Instrukcja

8 Stycznia 2025

La Crosse Technology M71633 Instrukcja

8 Stycznia 2025

La Crosse Technology V41CA Instrukcja

8 Stycznia 2025