Instrukcja obsługi ClimeMET CM4280

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ClimeMET CM4280 (2 stron) w kategorii Meetapparatuur. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
WWW.CLIMEMET.COM
Banjo Barometers
by
WWW.CLIMEMET.COM
Banjo Barometer
Features
Measurement range: Temperature -40 to 50 C; -40 to 120 F.Humidity 0-100% RH. Pressure 720-795 mmHg; 
960-1060 hPa.
Accuracy
Temperature:+/- 2°C
Relative humidity 0-45%:+/- 9% RH
Relative humidity 45-75%: +/- 6% RH
Relative humidity 75-100%: +/- 9% RH
Barometric pressure 960-990 hPa:+/- 10 hPa
Barometric pressure 990-1030 hPa: +/- 5 hPa
Barometric pressure 1030-1060 hPa: +/- 10 hPa
Location
Position your banjo barometer in an area where it can remain undisturbed. Do not position in direct sunlight
and avoid sources of heat and humidity that are not representative of the area you are looking to measure,
such as a kettle.
Setting Up Your Banjo Barometer
- Establish the current pressure for your location by visiting www.bbc.co.uk/weather.
- Adjust the needle via the turn screw on the back of the dial to set the current barometric pressure. Do not
over-tighten the barometer movement as this can damage the mechanism.
- Hang the banjo barometer in your desired location using the keyhole fitting on the back and leave for a few
days to acclimatise.
Reading Your Banjo Barometer
- Increasing pressure (movement of the needle in a clockwise direction) suggests improving weather.
- Decreasing pressure (movement of the needle in an anti-clockwise direction) suggests deteriorating weather.
- Steady pressure, typical of extended periods of fine weather, suggests more of the same conditions.
- Use the left-hand side of the stick thermometer scale to read current air temperature in C and the right-
hand side for F. 
- Use the hygrometer scale to read current humidity in % RH.
Using The Pressure Pointer
The settable pointer, controlled by the knob in the centre of the barometer dial face, can be used to show
changes in atmospheric pressure. To do this, move your settable pointer until it rests exactly over the internal
needle. The next time you observe your dial, any change in pressure will be highlighted by looking at the
difference in position of the two pointers.
Welcome to your ClimeMET Constable Barometer, designed by a team of outdoor
enthusiasts in rural Suffolk.
Let us help you make the most of the great outdoors.
Our ClimeMET Banjo Barometer is designed to provide temperature, humidity and
pressure readings in one place, perfect for those who love being outside. For
optimum results, it is necessary to calibrate the barometer part of the banjo to your
local barometric pressure before use. The barometer is designed to give accurate air
pressure readings from sea level to an altitude of 7000 feet.
All wooden weather instruments are suitable for indoor use only.
Discover our complete range at www.climemet.com.

Specyfikacje produktu

Marka: ClimeMET
Kategoria: Meetapparatuur
Model: CM4280

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ClimeMET CM4280, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Meetapparatuur ClimeMET

ClimeMET

ClimeMET CM2030 Instrukcja

3 Października 2024
ClimeMET

ClimeMET CM4280 Instrukcja

3 Października 2024
ClimeMET

ClimeMET CM3505 Instrukcja

3 Października 2024

Instrukcje Meetapparatuur

Najnowsze instrukcje dla Meetapparatuur

AkYtec

AkYtec SMI2-M Instrukcja

9 Października 2024
Eberle

Eberle LSW-3 Instrukcja

9 Października 2024
PeakTech

PeakTech 6191 Instrukcja

9 Października 2024
PeakTech

PeakTech 6192 Instrukcja

9 Października 2024
PeakTech

PeakTech 6194 Instrukcja

9 Października 2024
PeakTech

PeakTech 6170 Instrukcja

9 Października 2024
PeakTech

PeakTech 6171 Instrukcja

9 Października 2024
PeakTech

PeakTech 6172 Instrukcja

9 Października 2024
PeakTech

PeakTech 6173 Instrukcja

9 Października 2024
PeakTech

PeakTech 6190 Instrukcja

9 Października 2024