Instrukcja obsługi Citronic SMK-7


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Citronic SMK-7 (1 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
SMK-7
Item ref: 173.6 44UK
Studio Mic Kit
User Manual
Introduction
Th SMK-7 is a complete studio microphone oute fit for recording vocals and instruments into a mixing
console which has balanced inputs with phantom power. Th kit comprises a large diaphragm condenser e
microphone, shock-proof holder, foam pop filter, vocal pop screen angle-poise boom arm with worktop ,
clamp and a balanced XLR male to female lead.
Setting up
Attach the boom arm clamp to a desk or worktop by opening the
clamp to slide onto the edge of the worktop with the cone on the
top and tightening the underside screw clamp until it is firmly
attached. The boom arm fits onto the clamp by slotting the black
tube end into the hole in the cone at the top of the clamp.
To mount the microphone on the boom arm, push the microphone
(connector end first) into the shock-proof holder until it is held
firmly and then screw the base of the holder onto the threaded
adaptor on the silver end of the boom arm.
Adjust and tighten the base of the mic holder at the required angle
and use the angle poise mechanism to position the microphone
where needed.
If required, place the foam pop filter over the microphone grille and/or attach the gooseneck clamp of the
pop screen to the angle-poise boom arm for positioning the screen in front of the microphone In addition .
to reducing pops and sibilance, this screen can be used to help maintain the mouth distance from the
microphone for a more consistent vocal level.
Connect the female end of the supplied XLR lead to the microphone XLR connector and the male end (with
3 pins) to balanced input on the mixing console or recording device, ensuring that the output volume level a
is turned fully down or muted before connecting. Enable phantom power (+5V to +48V) to the XLR input
before
turning up the output level .
Check that the microphone is positioned correctly by increasing the volume whilst speaking into the
microphone and checking the output. Th voice should be clear and not muffled. If the voice is muffled, e
turn the microphone around until the front of the capsule is facing toward you, which should produce more
detail and full frequency response.
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as
Electrical or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2021. AVSL Group Ltd.
Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland


Specyfikacje produktu

Marka: Citronic
Kategoria: mikrofon
Model: SMK-7

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Citronic SMK-7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje mikrofon Citronic

Citronic

Citronic CU-50 Instrukcja

20 Września 2024
Citronic

Citronic UBM-62 Instrukcja

20 Września 2024
Citronic

Citronic RU105 Instrukcja

20 Września 2024
Citronic

Citronic RU210 Instrukcja

18 Września 2024
Citronic

Citronic CU-POD Instrukcja

18 Września 2024
Citronic

Citronic SMK-7 Instrukcja

18 Września 2024
Citronic

Citronic CU-POD2 Instrukcja

17 Września 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024