Instrukcja obsługi Citronic CM-4508B

Citronic głośnik CM-4508B

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Citronic CM-4508B (5 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
C A UB
Active Wooden Speaker Cabinets with Bluetooth®
Item ref: C A- 708UK UB 8A 178.
C A- A 710UK UB 10 178.
C A-UB 12A 712UK 178.
C A-UB 15A 715UK 178.
User Manual
Version 1.0
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
C A active speaker binets User Manual UB ca
Introduction
Thank you for choosing a C active speaker cabinet as part of your sound system. UBA
This product is designed to provide flexible, powerful and efficient output for a wide range of sound reinforcement
applications. Please read this manua to achieve optimum performance from your speaker cabinet and avoid damage l
through misuse.
Package Contents
• C A- ries active speaker cabinet UB se
• Mains lead(s)
This product contains no user-serviceable parts, so make no attempt to try to fix or modify this item yourself as this will
invalidate the warranty. We recommend you keep the original package and proof of purchase for any possible
replacement or return issues.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
Avoid impact to any of the components.
No user serviceable parts inside - refer servicing to qualified service personnel.
Safety
• Please observe the following warning conventions
CAUTION: RISK OF ELECTRIC SHOCK
DO NOT OPEN
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this
unit
This symbol indicates that there are important operating and instructions in the maintenance
literature accompanying this unit.
• Ensure that the correct mains lead is used with adequate current rating and mains voltage is as stated on the un it
• Avoid ingress of water or particles into any part of the housing If liquids are spilled on the cabinet, stop using .
immediately, allow the unit to dry out and have checked by qualified personnel before further use
Warning: this unit must be earthed
Place nt me
• Keep the electronic parts out of direct sunlight and away from heat sources.
• Position the cabinet on a stable surface or stand that is adequate to support the weight of the product.
• Allow adequate space for cooling and access to controls and connections at the rear of the cabinet.
• Keep the cabinet away from damp or dusty environments.
Cleaning
• Use a soft dry or slightly damp cloth clean surfaces of the cabinet to
• A soft brush can be used to clear debris from controls and connections without damaging th em
• To avoid damage, do not use solvents to clean any parts of the cabinet.
C A active speaker binets User Manual UB ca
Rea panel layout r
Setting up
Position your C A active speaker cabinet( on a stable surface capable of supporting the load and vibrations UB s)
from the cabinet or ideally on a strong 35mmØ pole mount or speaker stand with an adequate safe working
load to support the cabinet. Also, each CUBA cabinet has M8 flying points for suspending from a ceiling or
truss if required. It is recommended to use 3 or more fixing points for suspension.
Aim the cabinet towards the audience or listeners and not in direct line of sight with any microphones that are
connected to the sound system to avoid feedback (howling or squealing caused by the m hearing itself) ic “ ”
Each CUBA active speaker has an inbuilt Bl tooth receiver, which can be paired with a smart phone by ue
holding the Bluetooth on/off & pairing button for 3 seconds. The blue status LED ( will flash to indicate (8) 6)
pairing mode. Search for CUBA- CUBA- A CUBA- A or CUBA- A in the Bluetooth menu of the “8A”, “10 ”, “12 ”, “15 ”
smart phone and select to pair. Once paired, the LED will be lit constantly and the audio output from the
smart phone will be streamed wirelessly to the CUBA speaker. This input is governed by the LINE A input &
Bluetooth level control ( . Pressing the Bluetooth on/off pairing button briefly will switch the Bluetooth 9)
receiver on or off. If a previously paired device is within range, the Bluetooth receiver will auto connect.
If a mixing console is being used to control input sources, connect the output of the mixer to the CUBA
cabinet LINE input ( ) or MIC/LINE (3 with LINE selected on the MIC/LINE switch ( ) using XLR 10 ) “ ” 12 or
6.3mm jack connectors. If the system is in stereo, then usually one C A cabinet will serve the right-side UB
output and another for the left-side output. Normally, the volume of the C cabinet LINE inpu is turned up UBA t
high and the output will be controlled at the mixer.
A microphone may also be connected directly to input A if the MIC/LINE switch is in the MIC(12) “ ” position.
I playback device (e.g. mp3 or CD player) to be connected directly to the C A cabinet, this is usually f a is UB
connected to t LINE A input L+R RCA connectors (2) he
If the inputs to the C A speaker cabinet are to be linked onto a further active cabinet or amplifier, the mix of UB
all MIC/LINE/Bluetooth inputs can be fed from the MIX OUT line output XLR to further equipment (4)
When all necessary connections are made, finally connect the supplied IEC power cable (or equivalent) from
the mains power supply to the IEC power inlet on the CASA speaker cabinet, ensuring that the supply voltage
is as indicated on the CASA speaker unit ( ) 14
1.
DSP tone profile setting indicators
2.
L A input L+R RCA socke INE ts
3.
MIC/LINE B input XLR/jack socket
4.
MIX OUT line output XLR
5.
POWER on/off switch
6.
Bluetooth & amp status indicators
7.
DSP tone profile rotary selector
8.
Bluetooth on/off & pairing button
9.
LINE A input & Bluetooth level control
10.
LINE A input XLR/jack socket
11.
MIC/LINE B input level control
12.
Input 2 MIC or LINE level switch
13.
Fuse holder (on IEC for CUBA 8A/10A)
14.
Mains inlet IEC

Specyfikacje produktu

Marka: Citronic
Kategoria: głośnik
Model: CM-4508B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Citronic CM-4508B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Citronic

Citronic

Citronic CUBA-10AW Instrukcja

29 Września 2024
Citronic

Citronic CX-1608 Instrukcja

22 Września 2024
Citronic

Citronic CLARA-15A Instrukcja

22 Września 2024
Citronic

Citronic CUBA-12A Instrukcja

22 Września 2024
Citronic

Citronic CM15 Instrukcja

22 Września 2024
Citronic

Citronic DSM48 Instrukcja

22 Września 2024
Citronic

Citronic CM12 Instrukcja

22 Września 2024
Citronic

Citronic CX-8088 Instrukcja

22 Września 2024
Citronic

Citronic CM-4508B Instrukcja

21 Września 2024
Citronic

Citronic CUBA-8A Instrukcja

21 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024