Instrukcja obsługi Cisco SPA112


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cisco SPA112 (12 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Quick Start Guide
Cisco SPA100 Series Analog Telephone
Adapters
SPA112 Two Port Phone Adapter
SPA122 ATA with Router
Package Contents
Analog Telephone Adapter
Ethernet Cable
Power Adapter
Quick Start Guide
Product CD-ROM
2 Cisco SPA100 Series Analog Telephone Adapters
Welcome
Thank you for choosing a Cisco SPA100 Series Analog Telephone Adapter.
This product family includes the following models:
SPA112 Two-Port Phone Adapter: 2 FXS ports and 1 10/100 WAN
port.
SPA122 ATA with Router: 2 FXS ports, 1 10/100 WAN port, 1 10/100
LAN port, and built-in router.
This guide describes how to physically install the equipment and how to
get started with the configuration.
Before You Begin
Before you begin the installation, make sure that you have the following
equipment and services:
An active Internet account and Voice over IP account
Ethernet cable to connect to your broadband network device
Phone to connect to your SPA112/122
Phone cable to connect your phone
Optional: Uninterruptible Power Supply (UPS) to provide backup power
Product Features
Top Panel
1
2
Cisco SPA100 Series Analog Telephone Adapters 3
Back Panel
Feature Description
Phone 1
Phone 2
Steady green—On hook.
Slow flashing green—Off hook.
Off—Port not ready.
Internet
Flashing greenTransmitting or receiving data through
the WAN port.
Off—No link.
System
Steady green—System ready, IP address acquired.
Slow flashing green—Acquiring IP address. (By default,
uses DHCP.)
Fast flashing green—Upgrading firmware.
Off—No power or system can not boot up.
Feature Description
Reset Using a paperclip or similar object, press this button
briefly to restart the unit. Press and hold for 10
seconds to restore the factory default settings.
Phone 1,
Phone 2 (Gray)
Connect to an analog phone, using an RJ-11 phone
cable.
Ethernet (Yellow)
SPA122 Only
Can be used to connect to a device on your network,
such as a computer, using an Ethernet cable.
Internet (Blue) Connect to a broadband network device (DSL or
cable modem) or a network router, using an Ethernet
cable.
Power Connect to a power source, using the provided
power adapter.


Specyfikacje produktu

Marka: Cisco
Kategoria: Niesklasyfikowane
Model: SPA112

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cisco SPA112, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Cisco

Cisco

Cisco EPQ2160 Instrukcja

12 Stycznia 2025
Cisco

Cisco Desk Camera 4K Instrukcja

7 Października 2024
Cisco

Cisco SPA 500S Instrukcja

4 Października 2024
Cisco

Cisco DPC2100 Instrukcja

14 Września 2024
Cisco

Cisco N55-M16P-RF Instrukcja

5 Września 2024
Cisco

Cisco EPC3008 Instrukcja

2 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane