Instrukcja obsługi Cisco N55-M16P-RF

Cisco Niesklasyfikowane N55-M16P-RF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cisco N55-M16P-RF (52 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/52
C H A P T E R
1-1
Cisco Nexus 5000 Series Hardware Installation Guide
1
Overview
This chapter provides an overview of the Cisco Nexus 5000 Series switches, which include the Cisco
Nexus 5000 Platform switches and the Cisco Nexus 5500 Platform switches. The overview of each of
these switches includes information on the expansion modules, power supplies, and fan modules that you
can include with them.
This chapter includes the following sections:
•Cisco Nexus 5500 Platform Switches, page 1-1
•Cisco Nexus 5000 Platform Switches, page 1-29
Cisco Nexus 5500 Platform Switches
The Cisco Nexus 5500 Platform supports the following application scenarios, many of which require the
installation of other products:
•As an access-layer switch, it can be used purely as a 1- and 10-Gigabit Ethernet switch,
consolidating 10 Gigabit Ethernet connections into a smaller number of server connections trunked
to the aggregation layer.
•As a smaller-scale aggregation switch, it can be used as a Layer 3 1- and 10-Gigabit Ethernet switch,
consolidating multiple 1- and 10-Gigabit Ethernet connections from a data center access layer.
•In conjunction with the Cisco Nexus 2248T GE Ethernet Fabric Extender, the Cisco Nexus 5500
Platform can be a high-density 1-Gigabit Ethernet switching system, consolidating more than 900
Gigabit Ethernet connections within a single management plane.
•In conjunction with the Cisco Nexus 2232T 10GE Fabric Extender, it can be a high-density
switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single
management plane.
•In conjunction with the Cisco Nexus 2224TM 10GE Fabric Extender, it can be a high-density
switching system, consolidating more than 600 10-Gigabit Ethernet connections within a single
management plane
•As a rack-level I/O consolidation platform, the switch carries Ethernet traffic from servers to the
aggregation layer and carries FC traffic to existing Fibre Channel SANs.
•As a crucial element in data center I/O consolidation, the switch enables I/O consolidation at the
access layer and provides interoperability with the Cisco Nexus 5500 Platform and other
standards-based products.
This section describes the Cisco Nexus 5500 Platform switches and contains these sections:
•Cisco Nexus 5596UP Switch, page 1-2
1-2
Cisco Nexus 5000 Series Hardware Installation Guide
Chapter 1 Overview
Cisco Nexus 5500 Platform Switches
•Cisco Nexus 5596T Switch, page 1-12
•Cisco Nexus 5548UP and 5548P Switches, page 1-17
Cisco Nexus 5596UP Switch
This section describes the Cisco Nexus 5596UP switch and its components. This section includes the
following topics:
•Features, page 1-2
•Chassis, page 1-2
•Expansion Modules, page 1-4
•Ports, page 1-7
•Power Supply, page 1-8
•Fan Module, page 1-10
•Transceivers, page 1-11
Features
The Cisco Nexus 5596UP switch is a top-of-rack, 10-Gigabit Ethernet and Fibre channel over Ethernet
(FCoE) switch offering up to 1920 Gigabit throughput and up to 96 ports. The switch has 48 1- and
10-Gigabit Ethernet and FCoE ports and three expansion slots. As a top-of-rack switch, all the servers
in the rack connect to the Cisco Nexus 5596UP switch, and it connects to the LAN or SAN.
The Cisco Nexus 5596UP switch has the following features:
•48 fixed 1- and 10-Gigabit Ethernet server connection ports on the back of the switch
•Three slots on the back of the switch for optional expansion modules, which can be either a 16-port
10-Gigabit generic expansion module 2 (GEM2) or a layer 3 GEM2
•Two slots on the front of the switch for hot swap-capable power supplies, which provide
front-to-back airflow for cooling (the Cisco Nexus 5596T and 5596UP switches alternatively
support back-to-front [port-side intake] airflow)
•Four slots on the front of the switch for hot swap-capable fan modules.
•Layer 2 or Layer 3 I/O modules
•One USB port on the front of the switch
Note Hot swapping of normal air flow fans and power supplies with reverse airflow fans and power supplies
is not supported on the Cisco Nexus 5000 switches. Hot swapping of fans and power supplies is only
supported if they are replaced with the same direction parts.
Chassis
The Cisco Nexus 5596UP chassis is 2 RU or 3.47 inches (8.8 cm) tall, 17.3 inches (43.9 cm) wide, and
29.5 inches (74.9 cm) deep. It is designed to be mounted in a standard 19-inch wide rack. The front of
the switch, shown in Figure 1-1, has a USB port, four Ethernet and ports (two cross-connect ports, one
management port, and one console port), two power supplies, and four fan modules.
1-3
Cisco Nexus 5000 Series Hardware Installation Guide
Chapter 1 Overview
Cisco Nexus 5500 Platform Switches
Figure 1-1 Front View of the Cisco Nexus 5596UP Switch
The management and console ports are in a 2 x 2 stacked RJ-45 jack. Figure 1-2 shows a close-up view
of these ports. For information about the connector port LEDs, see Table D-1 on page D-2.
Figure 1-2 Management and Console Ports
4
3
6
5
2
1
237867
1 4USB port System status LED
2Management and console ports (two RJ-45 Ethernet connector
ports on the left, a RJ-45 network management connector on the
upper right, and a console connector on the lower right)
5Two power supplies
3 6Identifier LED Four fan modules
1
2 3
239021
4
5

Specyfikacje produktu

Marka: Cisco
Kategoria: Niesklasyfikowane
Model: N55-M16P-RF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cisco N55-M16P-RF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Cisco

Cisco

Cisco EPQ2160 Instrukcja

12 Stycznia 2025
Cisco

Cisco Webstar DPX110 Instrukcja

12 Stycznia 2025
Cisco

Cisco Desk Camera 4K Instrukcja

7 Października 2024
Cisco

Cisco SPA 500S Instrukcja

4 Października 2024
Cisco

Cisco DPC2100 Instrukcja

14 Września 2024
Cisco

Cisco N55-M16P-RF Instrukcja

5 Września 2024
Cisco

Cisco Webstar DPX100 Instrukcja

4 Września 2024
Cisco

Cisco SPA-1XOC3-ATM-V2 Instrukcja

3 Września 2024
Cisco

Cisco EPC3008 Instrukcja

2 Września 2024
Cisco

Cisco Webstar EPX2100 Instrukcja

31 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Milwaukee

Milwaukee 48-22-8426 Instrukcja

12 Stycznia 2025
Sony

Sony Clié PEGA-UC60K Instrukcja

12 Stycznia 2025
Uniden

Uniden WBR2-G54 Instrukcja

12 Stycznia 2025
Bestway

Bestway 43644 Instrukcja

12 Stycznia 2025
Pyle

Pyle PDWM2950 Instrukcja

12 Stycznia 2025
Makita

Makita MR007GZ Instrukcja

12 Stycznia 2025
LevelOne

LevelOne CAS-3101 Instrukcja

12 Stycznia 2025
Hyundai

Hyundai HYPM1600E Instrukcja

12 Stycznia 2025
Merkel

Merkel Helix Arabesque Instrukcja

12 Stycznia 2025
Bomann

Bomann ST/WA 1364 CB Instrukcja

12 Stycznia 2025