Instrukcja obsługi Cisco AS5350XM

Cisco nieskategoryzowany AS5350XM

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cisco AS5350XM (11 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/11

Page 1 of 11

Ordering Guide

How to Order a Cisco AS5350XM Universal Gateway

PRODUCT OVERVIEW

Cisco® AS5350XM Universal Gateways oﬀer unparalleled capacity and the ﬂexibility to deploy advanced voice, fax, and remote-access services.

With more than 24 million ports deployed, Cisco Systems® customers worldwide have shown that Cisco AS5000s provide the scale, reliability, and

suite of services required to meet market demands. The Cisco AS5350XM oﬀers best-in-class voice, fax, and remote-access services in one rack unit

(RU). The rich set of Cisco IOS® Software features available in the Cisco AS5350XM Universal Gateway makes the platform versatile and

deployable in a wide range of network architectures.

The Cisco AS5350XM Universal Gateway chassis has three slots that can take trunk cards, high-density packet voice/fax digital signal processor

(DSP) feature cards, and universal port DSP cards. Mixing high-density packet voice/fax feature cards and universal port DSP cards in the same

chassis is not supported. The following feature card options allow you to customize the platform conﬁguration to meet speciﬁc customer needs:

• The trunk card options available for this platform are 2CT1, 2CE1, 4CT1, 4CE1, 8CT1, 8CE1, and CT3.

• The high-density packet voice/fax feature card (AS5X-FC) available for this platform supports from 1 to 6 DSP modules (AS5X-PVDM2-64)

providing scalability from 64 to 384 voice and fax ports per card.

• The universal port DSP card options available for this platform are NP108 (108 universal ports) and NP60 (60 universal ports).

This document describes how to order the Cisco AS5350XM Universal Gateway and the relevant software licenses required for the gateway

features.

BEFORE YOU BEGIN

Before you begin, have the following information ready:

• Is an AC or DC power supply required? Is a non-redundant or a redundant power supply preferred?

• What is the ingress trunk type?

– The platform supports CT1, CE1, and CT3 ingress trunks.

• What cable or connector type is required to connect the trunks?

– Speciﬁc cable types such as DB15, RJ-45, BNC, etc. may be required to connect the E1/T1 trunks to the Cisco AS5350XM Universal

Gateway. The RJ-45 is sometimes referred to as RJ-48C.

• What trunk signaling is used?

– The Cisco AS5350XM Universal Gateway supports a variety of trunk signaling protocols, including T1 or E1 Primary Rate Interface (PRI),

channel associated signaling (CAS), and E1/R2. If using E1/R2 signaling, check with your Cisco representative to ensure that the platform

supports the country variant. A list of country variants supported is available at

http://www.cisco.com/en/US/products/hw/univgate/ps501/products_conﬁguration_guide_chapter09186a008007df5b.html - wp1081171.

– Signaling System 7 (SS7) signaling is also supported with the use of an external call agent such as the Cisco BTS 10200 Softswitch or the

Cisco PGW 2200 Softswitch.

• If T1 or E1 cables will be used for ingress, does the customer need the optional eight PRI breakout cable rack-mount bracket to organize cabling?

• Which of the following kinds of calls will be terminated on the platform?

– Voice calls, Voice Extensible Markup Language (VXML), modem calls, ISDN digital calls, wireless (V.110 or V.120) calls, or a

combination of these?

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 2 of 11

• Which applications need to be supported: Packet voice and fax, or universal port (dial-up/remote access in combination with voice), or dial only?

– Choose bundles or starter kit conﬁgurations that include high-density packet voice/fax feature cards and DSP modules for voice and fax

applications.

– Choose bundles or starter kit conﬁgurations that include universal port DSP feature cards for combined voice, fax, and remote

access applications.

– Choose bundles or starter kit conﬁgurations that include dial DSP feature cards for remote access applications. The AS5XM-DIAL-60NP

and AS5XM-DIAL-108NP DSP feature cards oﬀer a lower price point, but upgrades to support voice require a hardware trade-in.

• How many simultaneous sessions need to be supported?

– The maximum number of sessions that can be supported on one chassis varies, depending on the application. The Cisco AS5350XM

Universal Gateway is designed to handle a maximum of 672 voice or 216 dial sessions. Using the high-density packet voice/fax feature

card, the Cisco AS5350XM supports up to 12 E1 (360) or CT3 (672) G.711 voice or fax calls. Consult your Cisco representative to

determine the performance and capabilities of the platform for your speciﬁc applications.

• Is the AMR narrowband codec required?

– AMR narrowband codec support is available with the high-density packet voice/fax feature card. To activate the AMR codec, order the

Cisco AS5350XM AMR narrowband codec license (part number FR535XM-AMR-LIC); pricing is per platform.

• Is the platform used along with the Cisco PGW 2200 or any other vendor’s SS7 controller?

– To use the Integrated Signaling Link Terminal (SLT) feature, order the Cisco AS5350XM Cisco IOS Software Integrated SLT License

(part number FR535XM-SLT-LIC); pricing is per platform.

• What Cisco IOS Software features are required?

– Basic Cisco IOS Software features are present in the IP Plus feature set.

– Applications requiring Triple Data Encryption Standard (3DES) encryption, such as Secure Shell (SSH) Protocol Version 2, need the

IP PLUS 3DES feature set.

– Lawful Intercept is supported in the IP PLUS 3DES LAWFUL INTERCEPT feature set.

– X.25, AppleTalk, and other non-IP protocols are supported on the ENTERPRISE PLUS feature set.

– Enterprise applications requiring 3DES encryption need the ENTERPRISE PLUS 3DES feature set.

– Session border controller (SBC) features facilitate direct IP connectivity between independent VoIP and video networks. The Cisco

Multiservice IP-to-IP Gateway is an integrated Cisco IOS Software application that runs on the Cisco AS5350XM Universal Gateway, and

is available in the INT VOICE/VIDEO IPIPGW, TDMIP GW EPLUS and IOS INT VOICE/VIDEO IPIPGW, TDMIP GW LI feature sets.

FEATURE LICENSES

Basic feature licenses for voice and dial applications on the Cisco AS5350XM Universal Gateway are included in the price of the DSP feature

cards. A feature license is required to use the AMR narrowband codec, Cisco Multiservice IP-to-IP Gateway SBC features, Cisco Gatekeeper,

and integrated SLT features.

Optional Feature Licenses

• Feature license for the AMR Narrowband Codec on the Cisco AS5350XM Universal Gateway (part number FR535XM-AMR-LIC)

– This feature is designed to allow connectivity between GSM, US-TDMA, and PDC networks. AMR is the 3GPP mandatory standard codec

for narrowband speech and multimedia messaging services over GSM networks.

• Feature license for the Cisco Multiservice IP-to-IP Gateway SBC features and Cisco Gatekeeper on the Cisco AS5350XM Universal Gateway

(part number FL-INTVVSRV-5X)

– Operating a Cisco IOS Software image with support for the Cisco Multiservice IP-to-IP Gateway or Cisco Gatekeeper feature set

requires the purchase of an integrated voice and video services feature license. Cisco Multiservice IP-to-IP Gateway features can operate

concurrently with public-switched telephone network (PSTN) voice gateway features. Direct IP interconnections between VoIP networks

lower costs, lower latency, improve voice quality, and oﬀer greater ﬂexibility to support emerging services. The Cisco AS5350XM

Universal Gateway supports up to 1000 concurrent IP-to-IP calls (i.e. 2000 sessions) in media ﬂow-through mode, with media ﬂow-

around support also available.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.

Page 3 of 11

• Feature license for the Integrated SLT feature on the Cisco AS5350XM Universal Gateway (part number FR535XM-SLT-LIC)

– The Integrated SLT feature pulls existing Cisco distributed Message Transfer Part (MTP) SS7 signaling architecture functions—previously

available only on Cisco 26xx-based SLTs—directly onto a single Cisco AS5350XM Universal Gateway. Like the Cisco 26xx-based SLT,

the Integrated SLT on a Cisco AS5350XM Universal Gateway backhauls upper-layer SS7 protocols across an IP network using Cisco

Reliable User Datagram Protocol (RUDP), terminating the MTP1 and MTP2 layers of the SS7 protocol stack at the media gateway

controller (MGC).

Performance and Capacity

The performance and capacity of the Cisco AS5350XM Universal Gateway varies for diﬀerent applications. For example, the gateway is designed

to handle 672 voice or 216 dial sessions at up to 20 calls per second. Consult your Cisco representative for performance characteristics for the

speciﬁc applications that you will run on the gateway.

The Cisco AS5350XM Universal Gateway occupies one rack unit (RU), or 1.73 inches of rack space. The maximum power consumption of one

Cisco AS5350XM Universal Gateway is 168W in the 8E1 conﬁguration with 216 active calls. The heat dissipation is 573 BTUs/hour.

Voice Codecs

The Cisco AS5350XM Universal Gateway oﬀers multiple codecs to meet interoperability, compression, and latency requirements for a variety

of voice applications. The Cisco AS5350XM Universal Gateway supports the voice codecs in Table 1 and Table 2.

Table 1. Codec Support: Cisco AS5350XM Universal Gateway with High-Density Packet Voice/Fax Feature Card

DSP Feature Card Low Complexity Codecs Medium Complexity Codecs High Complexity Codecs

Cisco AS5350XM High-Density

Packet Voice/Fax Feature Card

(AS5X-FC) with Six DSP Module

(AS5X-PVDM2-64) Slots

• G.711 mu-law

• G.711 a-law

• Fax pass-through

• Modem pass-through

• Clear channel codec

• G.729 a

• G.729 ab

• G.726 16K, 24K, 32K

• T.38 Fax Relay

• Cisco Fax Relay

• Adaptive Multi-Rate: AMR-NB

4.75K, 5.15K, 5.9K, 6.7K, 7.4K,

7.95K, 10.2K, 12.2K, SID

• G.723.1 5.3K, 6.3K

• G.723.1A 5.3K, 6.3K

• G.728

• Internet Low Bitrate Codec

(iLBC)

• Modem Relay

Maximum Channel Capacity

per Feature Card (AS5X-FC)

384 192 144

Specyfikacje produktu

Marka:	Cisco
Kategoria:	nieskategoryzowany
Model:	AS5350XM
Platforma:	2CT1, 2CE1, 4CT1, 4CE1, 8CT1, 8CE1, CT3
Zasilanie:	Single AC
Kodeki glosu:	G.728
Inne połączenia:	2 E1
Emisja ciepła:	573 BTU/h
Minimalna ilość pamięci RAM:	512 MB