Instrukcja obsługi Chord SU20

Chord mikrofon SU20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chord SU20 (5 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/5
SU20
Dual UHF Wireless System
Item ref: 9 UK, 171.9171. 07 08UK, 171.909UK, 171.9 UK, 171.917 18UK
User Manual
Version 2 1.
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
SU User Manual 20
Introduction
Thank you for choosing the Chord SU20 wireless system. This professional wireless set provides a dual high
quality UHF radio microphone system for freedom of movement without loss of audio quality. The SU20 uses
Chord s NU4 technology to enable 2 sets to operate together on separate frequencies (ensure 2 sets with ’
different carrier frequencies). Please read this manual before using this equipment in order to avoid damage
through incorrect operation and to get the best performance from your purchase.
Package Contents
• SU20 UHF wireless receiver
• 19” rack mounting brackets
• 2 UHF aerial x
• 2 BNC antenna cable (for front panel mounting) x
• 2 x transmitter (SU20-H handheld and/ SU20-B bodypack) or
• 2 x neckband and 2 x lavalier microphones (SU20-B only)
• 1 x neckband and 1 x lavalier microphone (SU20-C only)
• Mains power adapter
• 6.3mm mono jack lead
• 4 x 1.5V AA battery
If you find any accessory is missing or the product has arrived with any problems, contact your retailer.
These products contain no user-serviceable parts inside. Do not attempt to try to fix or modify these items
yourself as this will invalidate the warranty. We recommend you keep the original package and proof of
purchase for any possible replacement or returned demand.
Warning
To prevent the risk of fire or electric shock, do not expose any of the components to rain or moisture.
If liquids are spilled on any component, stop using immediately, allow unit to dry out and have checked by
qualified personnel before further use.
Avoid impact or heavy vibration to any of the components, dropping the microphone can cause capsule
failure. No user serviceable parts inside transmitter or receiver - refer servicing to qualified service personnel.
Safety
• Ensure that the correc power adaptor is used with adequate current rating (350mA minimum) and that t
the mains voltage is as stated on the adapter.
• Avoid ingress of water or particles into the transmitters or receiver
• Use alkaline or NiMH batteries in the transmitters and remove if unused for long periods.
• Observe the correct polarity when replacing batteries
Placement
• Keep all components out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the receiver or transmitters
• If rack-mounting, use rack ears provided and do not place heavy equipment above the receiver.
• 2 receivers may be mounted side by side in a single 19 rack space using the supplied jointing plate. ”
• Keep the transmitters and receiver away from damp or dusty environments.
Cleaning
• Use a soft cloth with a neutral detergent to clean the body of the handheld transmitter and receiver.
• Lightly damp sterile wipes may be used on the microphone grille for hygiene purposes
• To avoid damage, do not use solvents to clean the components
SU User Manual 20
Receiver Front Panel
Receiver Rear Panel
Transmitters
Note: If replacement transmitters are required, these must be genuine Chord branded transmitters
which transmit the correct pilot tone to match with the receiver. Transmitters which have the
same carrier frequency but not the correct pilot tone will not work with SU-series receivers.
The SU20 system can allow 2 sets to be used together with Red, Green, Blue and Yellow
channels working independently without interference with each other.
1.
Power on/off switch
2.
RF carrier signal indicator - Channel A
3.
AF audio signal indicator - Channel A
4.
VOLUME control Channel A –
5.
RF carrier signal indicator - Channel B
6.
AF audio signal indicator - C B hannel
7.
VOLUME control Channel B –
8.
DC power input jack
9.
BNC antenna connector - nnel B Cha
10.
Unbalanced 6.3mm jack output CH. A+B
11.
Balanced XLRM output - nnel B Cha
12.
Balanced XLRM output - nnel A Cha
13.
BNC antenna connector - nnel A Cha
14.
15.
16.
17.
18.
19.

Specyfikacje produktu

Marka: Chord
Kategoria: mikrofon
Model: SU20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chord SU20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Chord

Chord

Chord COM-ST Instrukcja

4 Października 2024
Chord

Chord LM58 Instrukcja

27 Września 2024
Chord

Chord SU20 Instrukcja

14 Września 2024
Chord

Chord NU2 Instrukcja

13 Września 2024
Chord

Chord NU20 Instrukcja

4 Lipca 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Audio-Technica

Audio-Technica BP4073 Instrukcja

15 Października 2024
Power Dynamics

Power Dynamics PD524 Instrukcja

15 Października 2024
Audio-Technica

Audio-Technica AT4060 Instrukcja

14 Października 2024
Pyle

Pyle PDWM8225 Instrukcja

13 Października 2024
Sennheiser

Sennheiser ew 100 G4-845-S Instrukcja

13 Października 2024
AKG

AKG WMS420 Instrukcja

13 Października 2024
Audio-Technica

Audio-Technica BP892xCH Instrukcja

12 Października 2024
Apart

Apart MDS.DEL Instrukcja

10 Października 2024
Behringer

Behringer Go Cam Wireless Instrukcja

9 Października 2024
BOYA

BOYA BY-V4 Instrukcja

9 Października 2024