Instrukcja obsługi Chief RLXT3
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief RLXT3 (8 stron) w kategorii Wsparcie dla paneli płaskich. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
FIT LARGE EXTENDING TILT FLAT PANEL MOUNT
Spanish Product Description
German Product Description
RLXT3
RLXT3 Installation Instructions
2
DISCLAIMER
Legrand AV and its affiliated corporations and subsidiaries
|
(collectively “Legrand AV”), intend to make this manual |
accurate and complete. However, Legrand AV makes no claim |
that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Legrand AV
|
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Legrand AV
|
assumes no responsibility for accuracy, completeness or
sufficiency of the information contained in this document.
Chief® is a registered trademark of Legrand AV Inc.|
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all mounting systems
are properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this mounting system can result in serious personal injury
or damage to equipment! It is the installer’s responsibility to
make sure the structure to which this mounting system is
attached can support five times the combined weight of all
equipment. Reinforce the structure as required before
installing the mounting system.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components and accessories attached to RLXT3 does not
exceed 150 lbs (68.0 kg).
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this mounting system outdoors.
IMPORTANT ! :
The RLXT3 mount is designed to be mounted
to:
• a bare 8" concrete or 8"x8"x16" concrete block wall;
• a steel stud (16" on-center minimum, 24" on-center
maximum) wall with drywall thickness between 1/2"
(min) and 5/8" (max);
• a 2" x 4" wood stud wall covered by drywall with
thickness between 1/2" (min) and 5/8" (max):
•Wood studs must be 16" or 24" on center.
--SAVE THESE INSTRUCTIONS--
Installation Instructions RLXT3
3
DIMENSIONS
DIMENSIONS: INCHES
[MILLIMETERS]
96 5
.7 0
18
.3 4
9
24 3
CORD LEN G TH
PAST UPRIG HT S
400
.34
9
TYP.
16.00
40 6
*
24.00
61 0
**
32.00
81 3
*
24 .0 0
610
**
24.00
61 0
**
32 .0 0
813
*
32.00
NON WA LL
MOUNTIN G
AREA
* D ENOTES AC C EP TABLE 16" STUD SP A CING
** DENOTE S AC C EP TABLE 24 " ST UD SPAC IN G
Specyfikacje produktu
| Marka: | Chief |
| Kategoria: | Wsparcie dla paneli płaskich |
| Model: | RLXT3 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Chief RLXT3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Wsparcie dla paneli płaskich Chief
3 Kwietnia 2025
3 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
9 Marca 2025
4 Marca 2025
4 Marca 2025
6 Lutego 2025
31 Stycznia 2025
30 Stycznia 2025
Instrukcje Wsparcie dla paneli płaskich
- Wsparcie dla paneli płaskich StarTech.com
- Wsparcie dla paneli płaskich CTA Digital
- Wsparcie dla paneli płaskich Mount-It!
- Wsparcie dla paneli płaskich Peerless-AV
- Wsparcie dla paneli płaskich AKAI
- Wsparcie dla paneli płaskich Vogel's
- Wsparcie dla paneli płaskich Rocstor
- Wsparcie dla paneli płaskich Anywhere Cart
- Wsparcie dla paneli płaskich Twelve South
- Wsparcie dla paneli płaskich Metronic
- Wsparcie dla paneli płaskich Proaim
- Wsparcie dla paneli płaskich Erard
- Wsparcie dla paneli płaskich Ergotron
- Wsparcie dla paneli płaskich Atdec
- Wsparcie dla paneli płaskich Kogan
- Wsparcie dla paneli płaskich Premier Mounts
- Wsparcie dla paneli płaskich Alogic
- Wsparcie dla paneli płaskich XTRARM
- Wsparcie dla paneli płaskich Ateca
- Wsparcie dla paneli płaskich ViewZ
Najnowsze instrukcje dla Wsparcie dla paneli płaskich
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025