Instrukcja obsługi Chauvet Ovation FD-205WW

Chauvet Niesklasyfikowane Ovation FD-205WW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chauvet Ovation FD-205WW (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Quick Reference Guide
English EN
Español ES
Français FR
Nederlands NL
1
EN
QUICK REFERENCE GUIDE
Ovation FD-205WW QRG Rev. 1
About This Guide
The Ovation FD-205WW Quick Reference Guide (QRG) has basic product information such as connection, mounting,
menu options, and DMX values. Download the User Manual from www.chauvetprofessional.com for more details.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
Safety Notes
• DO NOT open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
• DO NOT look at the light source when the product is on.
• CAUTION: This product’s housing may be hot when lights are operating. Mount this product in a location with
adequate ventilation, at least 20 in (50 cm) from adjacent surfaces.
• DO NOT leave any flammable material within 50 cm of this product while operating or connected to power.
• CAUTION: When transferring product from extreme temperature environments, (e.g., cold truck to warm humid
ballroom) condensation may form on the internal electronics of the product. To avoid causing a failure, allow
product to fully acclimate to the surrounding environment before connecting it to power.
• USE a safety cable when mounting this product overhead.
• DO NOT operate this product outdoors or in any location where dust, excessive heat, water, or humidity may affect
it. (IP20)
• DO NOT operate this product if the housing, lenses, or cables appear damaged.
• ONLY connect this product to a grounded and protected circuit.
• ONLY use the hanging/mounting bracket to carry this product.
• In the event of a serious operating problem, stop using immediately.
• The maximum ambient temperature is 113 °F (45 °C). Do not operate this product at higher temperatures.
Contact
Outside the U.S., United Kingdom, Ireland, Mexico, or Benelux, contact your distributor to request support or return a
product. From inside the U.S., UK, Ireland, Mexico, or Benelux, use the information in Contact Us at the end of this QRG.
What is Included
• Ovation FD-205WW
• Neutrik® powerCON® power cord
• Gel frame (7.5 in/191 mm accessories)
• Warranty Card
• Quick Reference Guide
AC Power
This product has a switchable power supply that can work with an input voltage of 120 VAC, 60 Hz or 230 VAC, 50 Hz.
Power Linking
You can link up to 5 Ovation FD-205WW products at 120 VAC or 10 at 230 VAC. Never exceed this number. Power
linking cords can be purchased separately.
AC Plug
Replacing the Fuse
1. Disconnect this product from power.
2. Using a Phillips #2 head screwdriver, unscrew the fuse holder cap from the housing.
3. Remove blown fuse and replace with a good fuse of the same type and rating.
4. Screw the fuse holder cap back in place and reconnect power.
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green
To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely
disconnect the product from power via breaker or by unplugging it.
!
EN
2
Ovation FD-205WW QRG Rev. 1
QUICK REFERENCE GUIDE
DMX Linking
The Ovation FD-205WW will work with a DMX controller using a 3- or 5-pin DMX serial connection. A DMX Primer is
available from www.chauvetprofessional.com.
DMX Connection
The Ovation FD-205WW uses a 3- or 5-pin DMX data connection for its DMX personalities: and UNO, DOS STD.P. See
the User Manual for information about connecting and configuring the product for DMX operation.
Master Control
The Ovation FD-205WW allows control of other Ovation FD-205WW products using a regular DMX data connection. See
the User Manual to configure for Master Control operation.
Master/Slave Connection
The Ovation FD-205WW uses the DMX data connection for its master/slave mode. See the User Manual for information
about how to connect and configure the product for master/slave operation.
RDM (Remote Device Management)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller’s User Manual or with the manufacturer as not all DMX controllers
have this capability. The Ovation FD-205WW supports RDM protocol that allows feedback to make changes to menu
map options. Download the User Manual from www.chauvetprofessional.com for more details.
Dimmer/Zoom Control
The Ovation FD-205WW may be plugged into and controlled using a regular dimmer. In this mode, the product reacts
exactly like an incandescent product; however, the motorized zoom control on the control panel needs enough power
from the dimmer to run the motor. See the User Manual to configure Dimmer/Zoom Control operation.
Mounting
Before mounting this product, read the . Use at least one mounting point per product. Make sure the Safety Notes
mounting clamps are capable of supporting the weight of the product. For our Chauvet line of mounting clamps, go to
http://trusst.com/productcategory/truss-clamps/
Product Mounting Diagram
Safety Cable
Mounting Clamp
Overhead
Mounting
Secure the safety
cable using the
passageway on the
side of the product.

Specyfikacje produktu

Marka: Chauvet
Kategoria: Niesklasyfikowane
Model: Ovation FD-205WW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chauvet Ovation FD-205WW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Chauvet

Chauvet

Chauvet EZLink FSBT Instrukcja

5 Października 2024
Chauvet

Chauvet EZLink Q6BT Instrukcja

5 Października 2024
Chauvet

Chauvet SlimPAR T6 USB Instrukcja

3 Października 2024
Chauvet

Chauvet SlimPACK T12 USB Instrukcja

3 Października 2024
Chauvet

Chauvet BTAir Instrukcja

3 Października 2024
Chauvet

Chauvet COLORband Q3BT ILS Instrukcja

3 Października 2024
Chauvet

Chauvet Cumulus HP Instrukcja

3 Października 2024
Chauvet

Chauvet W-DMX Micro T-1 TRX G6 Instrukcja

3 Października 2024
Chauvet

Chauvet Vesuvio II Instrukcja

3 Października 2024
Chauvet

Chauvet STRIKE 4 Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024