Instrukcja obsługi Chauvet EZLink FSBT

Chauvet Niesklasyfikowane EZLink FSBT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chauvet EZLink FSBT (20 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Quick Reference Guide
Scan to download BTAir App
1
EN
QUICK REFERENCE GUIDE
EZLink FSBT QRG Rev. 4
About This Guide
The EZLink FSBT Quick Reference Guide (QRG) contains basic information about the product, such as product
overview, operation, and technical specifications.
Disclaimer
The information and specifications contained in this QRG are subject to change without notice.
LIMITED WARRANTY
FOR WARRANTY REGISTRATION AND COMPLETE TERMS AND CONDITIONS PLEASE VISIT OUR WEBSITE.
For Customers in the United States and Mexico: www.chauvetlighting.com/warranty-registration.
For Customers in the United Kingdom, Republic of Ireland, Belgium, the Netherlands, Luxembourg, France, and
Germany: www.chauvetlighting.eu/warranty-registration.
Chauvet warrants that this product shall be free from defects in material and workmanship under normal use, for the
period specified in, and subject to the exclusions and limitations set forth in the full limited warranty on our website. This
warranty extends only to the original purchaser of the product and is not transferable. To exercise rights under this
warranty, you must provide proof of purchase in the form of an original sales receipt from an authorized dealer that shows
the product name and date of purchase. THERE ARE NO OTHER EXPRESS OR IMPLIED WARRANTIES. This
warranty gives you specific legal rights. You may also have other rights that vary from state to state and country to
country. This warranty is valid only in the United States, United Kingdom, Republic of Ireland, Belgium, the Netherlands,
Luxembourg, France, Germany and Mexico. For warranty terms in other countries, please consult your local distributor.
Safety Notes
These Safety Notes include important information about installation, use, and maintenance.
Contact
Outside the U.S., United Kingdom, Ireland, Benelux, France, Germany, or Mexico, contact your distributor to request
support or return a product. Refer to Contact Us at the end of this QRG for contact information.
What is Included
To Begin
Unpack your EZLink FSBT and make sure you have received all parts in good condition. If the box or contents appear
damaged, notify the carrier immediately, not Chauvet.
AC Power
This product has an auto-ranging external power supply that can work with an input voltage range of 100 to 240 VAC,
50/60 Hz.
• ONLY connect this product to a grounded and protected circuit.
• DISCONNECT from power before cleaning.
• Make sure the power cord is not crimped or damaged.
• Never disconnect this product from power by pulling on the cord.
• DO NOT allow flammable materials close to the product when it is operating.
• DO NOT touch the product’s housing when it is on because it will be hot.
• The voltage of the outlet to which you are connecting this product must be within the range stated on the
decal or rear panel of the product.
• This product is for indoor use only! (IP20) To prevent risk of fire or shock, do not expose this product to rain
or moisture.
• Always mount this product in a location with adequate ventilation, at least 20 in (50 cm) from adjacent
surfaces.
• Be sure that no ventilation slots on the unit’s housing are blocked.
• Never connect this product to a dimmer or rheostat.
• The maximum ambient temperature is 104 °F (40 °C). Do not operate this product at higher temperatures.
• In the event of a serious operating problem, stop using immediately.
• DO NOT open this product. It contains no user-serviceable parts.
• To eliminate unnecessary wear and improve its lifespan, during periods of non-use completely disconnect
the product from power via breaker or by unplugging it.
• EZLink FSBT
• External power supply
• Quick Reference Guide
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.
EN
2
EZLink FSBT QRG Rev. 4
QUICK REFERENCE GUIDE
Battery Power
The EZLink FSBT comes with a rechargeable lithium battery for cable free operation.
Charging the Battery
The battery charges whenever the EZLink FSBT is plugged into the external charger and the charger is plugged into a
power source. If the product is plugged in and not in operation, make sure the product is turned off.
Battery Charge Notes
• Avoid depleting the battery below 10%.
• For best results, charge the battery in a temperature between 32 °F (0 °C), and 95 °F (35 °C).
• When charging the battery, keep the product at least 1 m from any open flame or hot plate.
• If the battery is completely discharged, the device cannot be turned on immediately when the charger is
connected. Allow a depleted battery to charge for a few minutes before turning on the device.
• While charging, the device may heat up. This is normal and should not affect the device’s lifespan or performance.
If the battery gets hotter than usual, the charger may stop charging.
• Do not charge the battery in a closed container.
• Do not charge the battery for more than 24 hours.
Battery Run Time
Footswitch Operation
Bluetooth Control
The EZLink FSBT can be operated with the BTAir application over a Bluetooth connection. Pair the EZLink FSBT with the
BTAir application. In playback mode, use the pedals to move from one playback to the other. For more information on
using the BTAir app, download the BTAir User Manual from www.chauvetdj.com.
*The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such
marks by Chauvet & Sons, LLC is under license. Other trademarks and trade names are those of their respective owners.
Product Overview
Maximum Run Time Recharge Time
Up to 8 hours 2 hours
Pedal Action Function
1 Back Moves backward through the preset playbacks
2 Blackout Blackout fixtures
3 Next Moves forward through the preset playbacks
• The EZLink FSBT only works while the BTAir application is in playback mode.
• Only 1 footswitch at a time can be paired to the BTAir application.
POWER IN:
5VDC
BACK BLACKOUT NEXT
FLASHING = PAIRING
SOLID = PAIRED
RED = CHARGING
GREEN = CHARGED
Power
Switch
DC Power
Input

Specyfikacje produktu

Marka: Chauvet
Kategoria: Niesklasyfikowane
Model: EZLink FSBT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chauvet EZLink FSBT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Chauvet

Chauvet

Chauvet EZLink FSBT Instrukcja

5 Października 2024
Chauvet

Chauvet EZLink Q6BT Instrukcja

5 Października 2024
Chauvet

Chauvet SlimPAR T6 USB Instrukcja

3 Października 2024
Chauvet

Chauvet SlimPACK T12 USB Instrukcja

3 Października 2024
Chauvet

Chauvet BTAir Instrukcja

3 Października 2024
Chauvet

Chauvet COLORband Q3BT ILS Instrukcja

3 Października 2024
Chauvet

Chauvet Cumulus HP Instrukcja

3 Października 2024
Chauvet

Chauvet W-DMX Micro T-1 TRX G6 Instrukcja

3 Października 2024
Chauvet

Chauvet Vesuvio II Instrukcja

3 Października 2024
Chauvet

Chauvet STRIKE 4 Instrukcja

3 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024