Instrukcja obsługi Chapin 82108N


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chapin 82108N (22 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/22
PROFESSIONAL/CONTRACTOR SALT SPREADER Assembly / Operation Instructions / Parts
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
Please call if you are missing any parts, having trouble assembling, or have any questions regarding the 800-950-4458
safe operation of this product.
DO NOT RETURN TO THE STORE
MODEL 82108N/82088N
Carefully Read These Instructions Before Use
IMPROPER USE OR FAILURE TO FOLLOW INSTRUCTIONS CAN RESULT IN PRODUCT FAILURE OR INJURIES. FOR SAFE
USE OF THIS PRODUCT YOU MUST READ AND FOLLOW ALL INSTRUCTIONS BEFORE USING.
- Do not allow anyone to operate the broadcast spreader without proper instructions
- Do not permit children to operate the broadcast spreader
- Wear protective eyewear and gloves when handling and applying lawn and garden chemicals
- Read the chemical label instructions and warnings for handling and applying the chemicals you plan to
spread – application settings provided are only a guideline
WARNING
Model 82108N
100 lb. Spreader
013524 R0714
Model 82088N
80 lb. Spreader
ASSEMBLY INSTRUCTIONS
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
Suggested Tools:
Wrench and/or Ratchet Set
1.5mm Allen Wrench
Pliers
Protective Eyewear
Approximate assembly time is 20-45 minutes
NOTE: Depending on model, this package may contain
additional hardware not needed for assembly.
Full scale nuts and bolts
M5 Nylon Locknut (1)
M6 Nylon Locknut (7) M6 x 55mm Hex Bolt (6) M6 x 45mm Hex Bolt (1)
M5 x 35mm Hex Bolt (1)
Flat Washer (1) Cotter Pin (1)
End Cap (2)
Hand Grip (2)
Bushings (2)
Step 1:
Attach the right Frame leg and the le Frame leg to the Frame
Body using (2) M6x55mm hex bolts and (2) M6 Nylon locknuts
per frame leg. Aer the frame legs have been attached, place the
two End caps onto the bottom of both frame legs. DO NOT
TIGHTEN DOWN COMPLETELY.
NOTE: Use bottom hole pattern on legs if equipped.
CHAPIN INTERNATIONAL, INC. P.O. BOX 549 700 ELLICOTT ST. BATAVIA, NY 14021-0549 www.chapinmfg.com 800-950-4458
Step 2:
Slide bushings into the holes on
the hopper frame from outside
of the frame.
Step 3:
Insert Axle into Tire as shown and secure using (1)
M6 x 45mm Hex Bolt and (1) M6 Nylon Locknut.
Take note of hole locations on Axle, to ensure
correct orientation.
Hole at top


Specyfikacje produktu

Marka: Chapin
Kategoria: Niesklasyfikowane
Model: 82108N

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chapin 82108N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Chapin

Chapin

Chapin G5502 Instrukcja

17 Września 2024
Chapin

Chapin 80088 Instrukcja

16 Września 2024
Chapin

Chapin 82108N Instrukcja

16 Września 2024
Chapin

Chapin 8700a Instrukcja

11 Września 2024
Chapin

Chapin 84000 Instrukcja

9 Września 2024
Chapin

Chapin 82500 Instrukcja

8 Września 2024
Chapin

Chapin 84600 Instrukcja

7 Września 2024
Chapin

Chapin 82108B Instrukcja

6 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane