Instrukcja obsługi Chandler REDD

Chandler mikrofon REDD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chandler REDD (11 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
For more information, visit www.chandlerlimited.com. © 2020 Chandler Limited, Inc. All Rights Reserved. REDD-MIC_UM_010820
Abbey Road Studios, EMI, REDD and their associated logos are trademarks of EMI (IP) Limited.
Chandler Limited®
REDD Microphone
User Manual
OFFICIAL
EQUIPMENT
2
For more information, visit www.chandlerlimited.com. © 2020 Chandler Limited, Inc. All Rights Reserved. REDD-MIC_UM_010820
Abbey Road Studios, EMI, REDD and their associated logos are trademarks of EMI (IP) Limited.
Thank you for purchasing the Chandler
Limited REDD Microphone, you now own a
piece of EMI / Abbey Road Studios official
equipment.
Continuing in the rich tradition of
innovation at EMI, dating back to the
early 1930s with Alan Blumlein, the father
of ‘Stereo’, the company’s first coil
microphones, velocity ‘ribbon’ mics and the
“Blumlein pair” technique, Chandler Limited
and Abbey Road Studios introduce the first
new EMI badged microphone in over a half
century, the ‘REDD Microphone’.
Designed by Chandler Limited Founder
and Chief Designer, Wade Goeke, the
REDD Microphone Patent No. 10,412,477 [ ]
represents a shift in traditional
microphone design, bringing together
historic circuitry and the heralded EMI
REDD.47 pre-amplifier sound in a new and
unique way.
The REDD Microphone is a large diaphragm
tube condenser microphone, featuring a
dedicated internal REDD.47 Mic Amplifier
circuit.
The REDD Microphone system includes:
microphone, 7-pin microphone cable, power
supply and AC cord, shock mount suspension
apparatus, pattern select screwdriver, and
custom moulded flight case.
The REDD Microphone, featuring its on-board
REDD.47 pre-amplifier circuit, is contained
in a cylindrical metal assembly, directly
coupled to a premium custom made, hand-
milled, platinum membrane capsule, housed
in the chrome head-basket compartment. The
front of the microphone is distinguished by
the Chandler Limited and Abbey Road Studios
logos.
The close proximity of capsule to
microphone pre-amp provides the shortest
possible distance between microphone
capsule and pre-amplifier, allowing the
REDD Microphone to drive the line from the
source, rather than the end. The all-in-one
approach reduces electronic circuitry in
the audio path, and allows for high-grade
audio transmission from the source.
The REDD Microphone was designed to
plug directly into audio interfaces or
tape machines, however, can be used with
traditional external pre-amplifiers for
more tonal possibilities.
We are proud of our American made products
and we hope you like them!
Call our shop anytime for help or
questions. Phone: (319) 885-4200
HISTORY
In 1958, EMI and Abbey Road Studios,
through their REDD (Record Engineering
Development Department) technical
division, designed the REDD.47 line
amplifier as a plug-in line amplifier for
their new REDD.51 consoles, replacing the
Telefunken/Siemens V72s used in early REDD
mixing consoles. The REDD.47 line amplifier
was unique, both in design and sound from
the V72s.
The first REDD.51 console was manufactured
in 1959. However, it wouldn’t be until 1964
before a REDD.51 console was installed at
Abbey Road Studios’ Studio Two, home to
The Beatles, leaving its exceptional sonic
character on their recordings from 1964 to
1968.
OFFICIAL
EQUIPMENT
3
For more information, visit www.chandlerlimited.com. © 2020 Chandler Limited, Inc. All Rights Reserved. REDD-MIC_UM_010820
Abbey Road Studios, EMI, REDD and their associated logos are trademarks of EMI (IP) Limited.
IMPORTANT
QUICK START & POWER CYCLE PROCEEDURE
1. Mount the microphone to a suitable microphone stand using the supplied
shock mount suspension apparatus.
2. PRIOR TO POWER-UP - CONNECTIONS
a. Connect the microphone to power supply using the supplied 7-pin
microphone cable.
b. Connect the user supplied standard 3-pin XLR microphone cable to the
audio interface or tape machine.
c. Connect the power supply to an AC outlet.
3. POWER-UP
a. Once all connections to and from the power supply to the microphone
have been made, turn on the power supply, by means of the power switch
located at the rear of the PSU.
b. If power has been achieved, the microphone’s on-board LED, located
inside the head-basket, will illuminate red to signify the microphone
is active. The LED is also used to help align the capsule to the sound
source.
c. WARNING- Do not disconnect the 7-Pin microphone cable while AC power
is applied to the microphone. If disconnection is to be made, power
down the microphone, and allow 5-10 minutes of cool-down time prior
to disconnection of the 7-pin microphone cable from the power supply.
NOTE- 3-pin XLR audio output connection may be patched or unpatched as
necessary, without powering down.
4. WARM-UP TIME
a. Prior to sound incident or usage, allow the microphone’s tubes to
warm-up for a minimum of 10 minutes.
5. POWER DOWN
a. Prior to disconnecting the 7-pin cable, power down the PSU, and allow
5-10 minutes for the microphone’s internal tubes to cool down and the
capsule adequate time to discharge. NOTE- It is recommended to power
down the REDD Microphone when not in use.

Specyfikacje produktu

Marka: Chandler
Kategoria: mikrofon
Model: REDD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chandler REDD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Chandler

Chandler

Chandler LIMITED TG Instrukcja

12 Sierpnia 2024
Chandler

Chandler REDD Instrukcja

18 Czerwca 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

MXL

MXL Forge Instrukcja

22 Marca 2025
Austrian Audio

Austrian Audio OC16 Instrukcja

19 Marca 2025
Kenwood

Kenwood KMC-66 Instrukcja

18 Marca 2025
Kenwood

Kenwood KMC-70 Instrukcja

18 Marca 2025
Kenwood

Kenwood KMC-32 Instrukcja

18 Marca 2025
Comica

Comica Vimo C2 Instrukcja

12 Marca 2025
Louroe Electronics

Louroe Electronics Verifact B Instrukcja

10 Marca 2025
Louroe Electronics

Louroe Electronics Verifact C Instrukcja

10 Marca 2025
Louroe Electronics

Louroe Electronics Verifact K Instrukcja

10 Marca 2025
Louroe Electronics

Louroe Electronics C-ML Instrukcja

10 Marca 2025