Instrukcja obsługi Champion ABB200P

Champion Zestawy stereo ABB200P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Champion ABB200P (12 stron) w kategorii Zestawy stereo. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/12
ABB200
SAFETY INSTRUCTIONS
1, READ INSTRUCTIONS – AII the safety and operating instructions should be read before the appliance is operated.
2, RETAIN INSTRUCTIONS – The safety and operating instruction should be retained for future reference.
3, HEED WARNINGS – AII warnings on the appliance and in the operating instructions should be adhered to.
4, FOLLOW INSTRUCTIONS – AII operating and use instructions should be followed.
5, WATER AND MOISTURE – The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink etc.
6, VENTILATION – The appliance should be situated so that its location or position does not interfere with its proper ventilation.
7, HEAT – The appliance should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.
8, POWER SOURCE – The appliance should be connected to a power supply only of the type described in the operating instructions
9, GROUNDING – Precautions should be taken to ensure that the grounding means of an appliance is not defeated.
10, POWER CORD PROTECTION – Power supply cords should be routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles and the point at which
they exit from the appliance.
11, POWER LINES – An out door antenna should be located away from power lines.
12, NON-USE PERIODS – The power cord of the appliance should be unplugged from the outlet when the appliance is to be left unused
for a long period of time.
13, OBJECT and LIQUID ENTRY – Care should be taken so that objects do not fall and liquids are not spilled into the enclosure.
14, DAMAGE REQUIRING SERVICE – The appliance should be serviced by qualified service personnel when:
A. The power – supply cord or plug has been damaged.
B. Objects have fallen into, or liquid has been spilled into the appliance enclosure.
C. The appliance has been exposed to rain.
D. The appliance has been dropped, or the enclosure damaged.
E. The appliance does not appear to operate normally or exhibits a marked change in performance.
15, SERVICING – The user should not attempt to service the appliance beyond that described in the user’s operating instructions.
AII other servicing should be referred to qualified service personnel.
These markings are located on the bottom, side or back of the unit
CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK),
NO USER SERVICABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol, within an
equilateral triangel, is intended to alert the user to the
presence of unisolated ”dangerous voltage” within the
product´s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle, is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
The following label has been affixed to the unit, listing the proper procedure for working with the laser beam.
1. THIS LABEL IS ATTACHED TO THE PLACE AS ILLUSTRATED TO INFORM THAT THE
APPARATUS CONTAINS A LASER COMPONENT,
2. THE WARNING LABEL INFORMING OF RADIATIONS IS PLACED INSIDE THE UNITS.
AS SHOWN ON THE ILLUSTRATION, TO WARN AGAINST FURTHER MEASURES ON
THE UNIT. THE EQUIPMENT CONTAINS A LASER RADIATING LASER RAYS EXCEEDING
THE LIMIT OF LASER PRODUCT OF CLASS 1.
NOTES:
1), It is preferred to retain CD inside the unit even when it is not in use. This prevents dust accumulation on optical lens.
2), Dirty or scratched CD may cause skipping problem. Clean or replace the CD.
3), If an erroneous display or malfunction occurs, disconnect the AC cord and remove all the batteries (where applicable) to turn off the
display. Then turn the power back on. No naked flame sources, such as lighted candles, should be placed on the apparatus.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed
on the apparatus. Disconnect the power sources by pulling the mains plug; mains plug shall remain readily operable.
BEFORE OPERATION
NOTES-CONCERNING COMPACT DISCS.
Since dirty, damaged or warped discs may damage the unit, care should be taken of the following items:
a. Usable compact discs - Use compact disc only with the mark shown on the disc.
b, CD: compact disc only with digital audio signals.
FROM THE CENTIER TO THE EDGE
This unit has been designed to play 8cm or 12cm compact discs bearing the identification logo shown on the disc.
Never use thinner, benzine, record cleaner or antistatic spray on a compact disc.
BEFORE OPERATION NOTES ON SET
Beware of condensation When water vapour comes into contact with the surface of cold material, water drops are produced.
If condensation occurs, correct operation may not be possible or the unit may not function correctly.
This is not a malfunction however, and the unit should be dried (To do this, turn the POWER switch ON and leave
the unit as it is for several hours.)
Be especially careful in the following conditions.
1. When the unit is brought from a cold place to a warm place, and there is a large temperature difference.
2. When a heater starts operating.
3. When the unit is brought from an air-conditioned place to a place of high temperature with high humidity.
4. When there is a large difference between the internal temperature of the unit and ambient temperature, or in
conditions where condensation occurs easily.
Protect your unit/set from rain, fire, moisture, sand, dust, chemicals & excessive heat (e.g. Near heating equipment or
in car parked under the sun light.)
LOCATION CONTROLS OF UNIT
1, VOLUME CONTROL
2, POWER ON INDICATOR
3, USB PORT 4, SD/MMC SLOT
5, FM STEREO INDICATOR
6, LCD DISPLAY
7, TUNING CONTROL
8, AUX-IN JACK
9, FUNCTION SELECTOR
10, MODE BUTTON
11, FOLDER + BUTTON
12, PLAY/PAUSE
13, STOP BUTTON
14, SKIP- BUTTON
15, SKIP+ BUTTON
16, CD COVER OPEN BUTTON
17, BAND SELECTOR
18, ANTENNA
19, CD COVER

Specyfikacje produktu

Marka: Champion
Kategoria: Zestawy stereo
Model: ABB200P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Champion ABB200P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zestawy stereo Champion

Champion

Champion ABB200P Instrukcja

4 Lipca 2024

Instrukcje Zestawy stereo

Najnowsze instrukcje dla Zestawy stereo

Sony

Sony MHC-GRX20 Instrukcja

15 Października 2024
Denver

Denver TC-27 Instrukcja

13 Października 2024
Panasonic

Panasonic SC-AK310G Instrukcja

13 Października 2024
Samsung

Samsung MAX-DA69 Instrukcja

13 Października 2024
Panasonic

Panasonic SC-PM5DB Instrukcja

10 Października 2024
Philips

Philips DCM186B Instrukcja

9 Października 2024
Bush

Bush CD-78B-BTFM Instrukcja

8 Października 2024
Technics

Technics SC-HD310 Instrukcja

7 Października 2024
ECG

ECG CDR 500 U Instrukcja

9 Sierpnia 2024
Sharp

Sharp XL-HF151PHS Instrukcja

9 Sierpnia 2024