Instrukcja obsługi Challenge T-43ELC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Challenge T-43ELC (7 stron) w kategorii sejf. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
Digital Home Safe
Always Read the Instruction Manual
NEVER LOCK YOUR SPARE OVERRIDE KEYS OR THE INSTRUCTION MANUAL IN THE SAFE.
ONCE THE BATTERIES DEPLETE, YOU WILL NEED TO USE THE KEYS TO OPEN THE SAFE.
SPARE KEYS ARE UNAVAILABLE!
THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING THE
OPERATION AND MAINTENANCE OF THE SAFE
COMPLETELY READ AND UNDERSTAND THE MANUAL BEFORE SECURING ITEMS IN THE SAFE
SAVE THIS MANUAL FOR FUTURE REFERENCE
MODELS: T-43ELC
SAFE DIAGRAM
-1-
Locking knob LCD (display)
Key pad
Instructions
4 x ‘AA’
batteries
Override keys 4 x rawlbolts
Concealed hinges
Key lock cover
Dia.1
NOTE: This safe is NOT re proof.
NOTE: This safe has no cash rating.
CONTENTS
1 X Instruction book
2 X Manual override keys
1 X Internal mat
4 X ‘AA’ Batteries
4 X Rawlbolts
IMPORTANT INFORMATION
This safe can be programmed with two sets of codes, User and Master. After opening the safe and
installing the batteries you should change the USER and MASTER PINS, from the factories pre-set
codes, for security reasons. You could give the user code to a guest while maintaining the master code.
OPERATING THE SAFE FOR THE FIRST TIME
Use the Manual override key to open the safe.
Remove the plastic key lock cover (dia 1)•
Insert the override key; turn it anti-clockwise, at the same time turn the locking knob clockwise and pull •
open the safe.
See • BATTERY REPLACEMENT
Keep the safe door open until you have set the PIN code.•
LCD DISPLAY
To hide the numbers from being displayed when entered, Press “START” twice before entering you’re •
PIN. “-” will be displayed instead of the number.
SPECIFICATION
T-43ELC
SIZE : 43 (w) x 35 (h) x 20 (d) Cm
NET WEIGHT: 11.25Kgs
POWER SUPPLY: 4x ‘AA’ 1.5V Batteries
INTERNAL VOLUME: 30.19 Litre
-2-
PROGRAMMING YOUR USER PIN NUMBER ( )personal identication number
DEFAULT FACTORY USER PIN: 0000
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any •
combination of numbers from 3 to 8 digits)
With the door open, remove the security cap by unscrewing it, •
(dia.2).
Depress the red reset button located at the back of the door.•
The LCD screen displays “SEt-CodE”•
You now have 20 seconds to enter your PIN.•
Enter your PIN code. You can enter 3-8 numbers. •
Press “START” button•
“In” will be displayed on the LCD screen and two beeps will be •
heard
You PIN has now been set.•
Screw the security cap back onto the red reset button. Ensure you do this for security reasons.•
While the door is open familiarise yourself with the door opening procedure, and leave the door open
untilyouaresatisedthatyoufullyunderstandtheopeningandclosingmethod.Youcanre-setthePIN
at any time by following the above procedure.
PROGRAMMING YOUR MASTER PIN NUMBER ( )personal identication number
DEFAULT FACTORY MASTER PIN: 8888
Each time a button is pressed, a beep will be heard. This is a safety feature so that you will know when
the safe is being accessed and cannot be switched off.
Keep PIN Codes in a safe place.
Do not use personal information like birthdays, telephone numbers etc.
Write down your PIN number so you do not forget it. (any •
combination of numbers from 3 to 8 digits)
With the door open, remove the security cap by unscrewing it, •
(dia.3).
Depress the red reset button located at the back of the door.•
The LCD screen displays “SEt-CodE”•
Press “START” button•
The LCD screen displays “oLd-CodE”•
EntertheexistingPIN(atrstthiswillbethefactoryPIN)•
Press “START” button•
The LCD screen displays “SET”•
You now have 20 seconds to enter your PIN.•
Enter your new PIN code. You can enter 3-8 numbers. •
Press “START” button•
The LCD screen displays “rE-inPut”•
Re-Enter your new PIN code.•
Press “START” button•
Dia.2
Security cap
covering reset
button
Dia.3
Security cap
covering reset
button
Specyfikacje produktu
| Marka: | Challenge |
| Kategoria: | sejf |
| Model: | T-43ELC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Challenge T-43ELC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje sejf Challenge
26 Czerwca 2024
26 Czerwca 2024
26 Czerwca 2024
Instrukcje sejf
- sejf Honeywell
- sejf Renkforce
- sejf Perel
- sejf SereneLife
- sejf Burg Wächter
- sejf Phoenix
- sejf Rottner Tresor
Najnowsze instrukcje dla sejf
28 Września 2024
28 Września 2024
17 Września 2024
7 Września 2024
21 Czerwca 2024
30 Maja 2024
28 Maja 2024
22 Maja 2024
21 Maja 2024
14 Maja 2024