Instrukcja obsługi Challenge Xtreme CX-PT 2538

Challenge Xtreme Podcinacz CX-PT 2538

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Challenge Xtreme CX-PT 2538 (20 stron) w kategorii Podcinacz. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
Original Operating Instruction
Petrol Grass Trimmer CX-PT 2538
WARNING! PLEASE READ THESE INSTRUCTIONS
BEFORE OPERATING THIS UNIT
KEEP THIS MANUAL FOR FUTURE REFERENCE
Art.-Nr.:34.018.51 I.-Nr.:11010 CX-PT 2538
Petrol Grass Trimmer CX-PT 2538
WARNING! PLEASE READ THESE INSTRUCTIONS
BEFORE OPERATING THIS UNIT
KEEP THIS MANUAL FOR FUTURE REFERENCE
EH-Art.-No.:34.018.51
I.-Nr.:11010 CX-PT 2538
Safety information:
1. Read the directions with due care. Familiarize yourself
with the settings and proper operation of the machine.
2. Never allow children or other persons who are not
familiar with the operating instructions to use the petrol
power scythe.
3. Never mow in the direct vicinity of persons - especially
children - or animals. Warning: Maintain a safety
distance of 15m. If approached, switch off the appliance
immediately. Always keep in mind that the machine
operator or user is responsible for accidents involving
other persons and/or their property.
Preliminary measures
1. Always wear sturdy, non-slip footwear and long trousers
when mowing. Never operate whilst barefoot or in sandals.
2. Check the grounds on which the machine will be used
and remove all objects that could be caught up and
violently flung out.
3. Warning: Petrol is highly flammable! Therefore: - Only
store petrol in containers designed to hold petroleum-
based liquids.
• Only refuel out in the open and do not smoke during the
refueling process.
• Always refuel before starting the engine. Do not open the
fuel tank cap and do not refuel when the engine is running
or when the grass trimmer is hot.
• If petrol has overflowed, do not under any circumstances
attempt to start the engine. Instead, remove the machine
from the affected area. Avoid starting the engine until the
petrol fumes have completely evaporated.
• For safety reasons, the petrol tank and other tank
closures must be replaced if they are damaged.
4. Replace defective exhausts.
5. Before using the grass trimmer visually, inspect it to
ensure that the blade, mounting bolts and the entire cutting
apparatus are in good working order (i.e. not worn out or
damaged). To prevent any imbalance, replace worn out
or damaged blades and mounting bolts as a set only (if
applicable).
Handling
1. Wear close fitting, tough work clothing that will provide
protection, such as long slacks or trousers, safety work
shoes, heavy duty work gloves, hard hat, a safety face
shield, or safety glasses for eye protection and a good
grade of ear plugs or ear defenders for hearing protection.
2. Store in a safe place. Open fuel cap slowly to release
any pressure which may have formed in fuel tank. To
prevent a fire hazard, move at least 10 feet (3 meters) from
fueling area before starting.
3. Turn unit off before setting it down.
4. Always hold unit firmly with both hands, the thumb and
fingers encircling the handles.
2 Helpline No. UK 0151 649 1500 / IRE 189 094 6244
5. Keep all screws and fasteners tight. Never operate your
equipment when it is improperly adjusted or not completely
and securely assembled.
6. Keep handles dry, clean and free of fuel mixture.
7. Keep the line spool as close to ground as practical.
Avoid hitting small objects with the line spool. When cutting
on a slope, stand below the line spool. NEVER cut or trim
on a hill or slope, etc. if there is the slightest chance of
slipping, sliding or losing firm footing.
8. Check area you will be trimming for debris that may be
struck or thrown during operation.
9. Keep all parts of your body and clothing away from the
line spool when starting or running engine. Before starting
engine, make sure the line spool will not come in contact
with any obstacle.
10. Stop engine before examining cutting line.
11. Store equipment away from possible flammable
materials, such as gas-powered water heaters, clothes
dryers, or oil-fired furnaces, portable heaters, etc.
12. Always keep the debris shield, the line spool, and
engine free of debris build-up.
13. Operation of equipment should always be restricted to
mature and properly instructed individuals.
14. If unfamiliar with trimming techniques, practice the
procedures with engine in “OFF” position.
15. Always clear work area of debris such as cans, bottles,
rocks, etc. Striking objects can cause serious injury to the
operator or bystanders and also damage equipment. If an
object is accidentally hit, immediately turn engine off and
examine equipment. Never operate unit with damaged or
defective equipment.
16. Always trim or cut at high engine speeds. Do not run
engine slowly at start or during trimming operations.
17. Do not use equipment for purposes other than
trimming or mowing weeds.
18. Never raise the line spool above knee height during
operation.
19. Do not operate unit with other people or animals in
the immediate vicinity. Allow a minimum of 50 feet (15
meters) between operator and other people and animals
when trimming or mowing. Allow a distance of 100 feet (30
meters) between operator and other people and animals
when scalping with the line spool cutter.
20. If operating unit on a slope, stand below the
cutting attachment. Do not operate on a slope or hilly
incline if there is the slightest chance of slipping or
losing your footing.
Additional safety instructions
1. DO NOT USE ANY OTHER FUEL than that
recommended in your manual. Always follow instructions
in the Fuel and Lubrication section of this manual. Never
use petrol unless it is properly mixed with 2 stroke engine
lubricant. Permanent damage to engine will result, voiding
manufacturer’s warranty.
2. DO NOT SMOKE while refueling or operating
equipment.
3. DO NOT OPERATE UNIT WITHOUT AN EXHAUST
and properly installed exhaust shield.
4. DO NOT TOUCH or let your hands or body come in
contact with the exhaust. Hold unit with thumbs and fingers
encircling the handles.
5. DO NOT OPERATE UNIT IN AWKWARD POSITIONS,
off balance, outstretched arms, or one-handed. Always use
two hands when operating unit with thumbs and fingers
encircling the handles.
6. DO NOT RAISE THE LINE SPOOL above ground level
while unit is operating. Injury to operator could result.
7. DO NOT USE UNIT FOR ANY PURPOSES OTHER
than trimming lawn or garden areas.
8. DO NOT OPERATE UNIT FOR PROLONGED
PERIODS. Rest periodically.
9. DO NOT OPERATE UNIT WHILE UNDER THE
INFLUENCE OF ALCOHOL OR DRUGS.
10. DO NOT OPERATE UNIT UNLESS DEBRIS SHIELD
AND/OR GUARD IS INSTALLED AND IN GOOD
CONDITION.
11. DO NOT ADD, REMOVE OR ALTER ANY
COMPONENTS OF THIS PRODUCT. Doing so could
cause personal injury and/or damage the unit voiding the
manufacturer’s warranty.
12. DO NOT operate your unit near or around flammable
liquids or gases whether in or out of doors. An explosion
and/or fire may result.
13. DO NOT USE ANY OTHER CUTTING TOOLS.
For your own safety only use the accessories and
additional equipment specified in the operating manual or
recommended or specified by the manufacturer. The use
of tools or accessories other than those recommended in
the operating manual or catalog may place you in danger
of personal injury.
Helpline No. UK 0151 649 1500 / IRE 189 094 6244 3

Specyfikacje produktu

Marka: Challenge Xtreme
Kategoria: Podcinacz
Model: CX-PT 2538

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Challenge Xtreme CX-PT 2538, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Podcinacz Challenge Xtreme

Challenge Xtreme

Challenge Xtreme CX-PT 2538 Instrukcja

11 Września 2024

Instrukcje Podcinacz

Najnowsze instrukcje dla Podcinacz

Black & Decker

Black & Decker GL570 Instrukcja

15 Października 2024
Husqvarna

Husqvarna 236R Instrukcja

14 Października 2024
RYOBI

RYOBI One+ P20220 Instrukcja

9 Października 2024
Husqvarna

Husqvarna 110iL Instrukcja

9 Października 2024
Toro

Toro 51434 Instrukcja

8 Października 2024
Toro

Toro 51490 Instrukcja

8 Października 2024
Toro

Toro 51494 Instrukcja

8 Października 2024
Toro

Toro 51498T Instrukcja

8 Października 2024
Toro

Toro 51653 Instrukcja

8 Października 2024
Toro

Toro i51020 Instrukcja

8 Października 2024