Instrukcja obsługi Celestron PowerTank 17

Celestron statyw PowerTank 17

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Celestron PowerTank 17 (40 stron) w kategorii statyw. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/40
INSTRUCTION MANUAL
ENG LI SH
P O R T A B L E P O W E R P A C K
#18763
2 IENGLISH
PowerTank Lithium LT is a highly portable power pack that
uses a lithium nickel cobalt manganese battery and voltage
regulating electronics. It is engineered specifically for use with
telescopes, as the consistent 12V DC output ensures optimal
telescope performance as the battery is discharged. It also
works great with telescope accessories and other electronics
1. 12V DC input/output port
2. Battery indicator lights
3. USB output port
4. Power Button
5. Tripod leg mount
6. Tripod leg strap
7. Celestron telescope power cable
8. AC charger
9. International adapter plug (x4)
1 2 3 4
5
6
7
8
9
FEATURES AND PARTS LIST
requiring 12V DC power. In addition, PowerTank Lithium LT
has a fast-charging USB port for charging devices such as
smartphones and tablets.
Please read through this instruction manual to understand the
functions and features of the PowerTank Lithium LT.
ENGLISH I3
OPERATION
CHARGING THE POWERTANK LITHIUM LT
We recommend fully charging the power pack when
you first receive it and before first use. To maintain its
performance, you should recharge the unit at least once
every 6 months.
TO CHARGE:
1. Determine which international adapter plug you need
for your location and slide it into place on the AC
charger. Make sure the adapter plug is fully seated and
snaps into place.
2. Plug the AC charger’s cable into the 12V DC port on
the power pack.
3. Plug the AC charger into an electrical outlet. The
charger can accept an AC input of 100-240V
50/60Hz.
The battery indicator lights will blink when charging. When
charging is complete, all the lights will remain illuminated. Fully
charging the power pack can take up to 4 hours. Don’t leave
the AC charger connected to the power pack for more
than 24 hours.
If you are traveling internationally with the PowerTank Lithium
LT, it may be necessary to change the AC chargers adapter
plug. To do this, simply depress the locking button on the
charger (located directly below the plug), slide the plug off and
replace it with the plug you need.
WARNING: The AC charger has an output of 16V DC. Do not attempt to use this charger
to power your telescope directly or damage to the telescope could result.
THE POWER BUTTON AND BATTERY INDICATOR LIGHTS
Pressing the power button turns the PowerTank Lithium LT on,
and allows use of the USB and 12V DC output ports. Both
ports can be used at the same time. The battery indicator lights
will also turn on and indicate the battery charge status:
4 lights illuminated 100 % charged
3 lights illuminated 75% charged
2 lights illuminated 50% charged
1 light illuminated 25% charged
The battery indicator lights will turn off after about 10 seconds.
They will turn on again when a device is connected to one of
the charging ports. When the battery is fully discharged, the
power pack will automatically shut off, and cannot be turned on
again until it is recharged.
Press and hold the power button for one second to turn the
PowerTank Lithium LT off. The power will automatically turn off
if there is no load detected (less than 150mA) for one hour.


Specyfikacje produktu

Marka: Celestron
Kategoria: statyw
Model: PowerTank 17

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Celestron PowerTank 17, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje statyw Celestron

Celestron

Celestron 93480 Instrukcja

7 Października 2024

Instrukcje statyw

Najnowsze instrukcje dla statyw

Manfrotto

Manfrotto MVR901ECEX Instrukcja

9 Października 2024
Manfrotto

Manfrotto 562B-1 Instrukcja

8 Października 2024
E-Image

E-Image EG01A2 Instrukcja

8 Października 2024
E-Image

E-Image GH10 Instrukcja

8 Października 2024
E-Image

E-Image GC752 Instrukcja

8 Października 2024
E-Image

E-Image EG03A2 Instrukcja

8 Października 2024
E-Image

E-Image GA752 Instrukcja

8 Października 2024
E-Image

E-Image GH03 Instrukcja

8 Października 2024
E-Image

E-Image GH06 Instrukcja

8 Października 2024