Instrukcja obsługi CDA HN6410

CDA piec HN6410

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CDA HN6410 (24 stron) w kategorii piec. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

IMPORTANT: PLEASE REFER TO PAGE 20 FOR INFORMATION ON

CONFIGURING THE POWER CONSUMPTION MODE CORRECTLY.

THE HOB MUST BE CONFIGURED AT FIRST SWITCH ON.

Customer Care Department • The Group Ltd. • Harby Road • Langar • Nottinghamshire • NG13 9HY

T : F : E : W : 01949 862 012 01949 862 003 service@cda.eu www.cda.eu

hn6410 Induction Hob

Manual for Installation, Use and Maintenance

Important

The CDA Group Ltd cannot be held responsible for injuries or losses

caused by incorrect use or installation of this product. Please note

that CDA reserve the right to invalidate the guarantee supplied with

this product following incorrect installation or misuse of the appliance

or use in a commercial environment.

This appliance is not designed to be used by people (including

children) with reduced physical, sensorial or mental capacity, or

who lack experience or knowledge about it, unless they have had

supervision or instructions on how to use the appliance by someone

who is responsible for their safety.

Under no circumstances should any external covers be removed for

servicing or maintenance except by suitably qualiﬁed personnel.

Appliance information:

Please enter the details on the appliance rating plate below for

reference, to assist CDA Customer Care in the event of a fault with

your appliance and to register your appliance for guarantee purposes.

Appliance Model

Serial Number

CE Declarations of Conformity

This appliance has been manufactured to the strictest standards and

complies with all applicable legislation, including Electrical safety (LVD)

2006/95/EC and Electromagnetic interference compatibility (EMC)

2004/108/EC. Parts intended to come into contact with food conform

to 89/109/EC.

IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE

PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC.

At the end of its working life, the product must be taken to a special

local authority waste collection centre or to a dealer providing

appliance recycling services.

Disposing of a household appliance separately avoids possible

negative consequences for the environment and health. It also

enables the constituent materials to be recovered, saving both energy

and resources. As a reminder of the need to dispose of household

appliances separately, the product is marked with a crossed-out

wheeled dustbin.

Please note:

• Induction hobs become hot and remain hot during and immediately

after use. Do not touch the hob until it has been allowed to cool.

• Keep children away from the appliance when in use.

• Never use the hob top for storage.

• Pan handles should never stand out beyond the edge of the

worktop. This will ensure children cannot reach them.

• Do not lean over the hob when it is in use.

• Follow the cleaning instructions carefully.

• Ensure the base of the saucepan is clean and dry before placing it

on the hob.

• Avoid hard shocks from cookware – the vitroceramic glass surface

is highly resistant but not unbreakable.

Specyfikacje produktu

Marka:	CDA
Kategoria:	piec
Model:	HN6410
Kolor produktu:	Czarny
Typ kontroli:	Dotyk
Wbudowany wyświetlacz:	Tak
Łatwy do czyszczenia:	Tak
Typ wyświetlacza:	LED
Położenie urządzenia:	Wbudowany
Automatyczne wyłączanie zasilania:	Tak
Wysokość produktu:	- mm
Szerokość produktu:	580 mm
Głębokość produktu:	510 mm
Minutnik:	Tak
Rodzaj płyty grzejnej:	Płyta indukcyjna strefowa
Liczba palników/stref gotowania:	4 stref(y)
Liczba płytek elektrycznych:	4 stref(y)
Wskaźnik ciepła:	Tak
Funkcja zwiększenia:	Tak
Liczba poziomów zasilania:	9
Normalna średnica palników/płytek eletrycznych:	145 mm
Normalny palnik:	1200 W
Duży palnik:	1500 W
Palnik o wolnym ogniu:	1200 W
Bardzo duży palnik o dużej prędkości:	1500 W
Mała średnica palników/płytek eletrycznych:	145 mm
Duża średnica palników/płytek eletrycznych:	210 mm
Bardzo duża średnica palników/płytek eletrycznych:	210 mm