Instrukcja obsługi CDA CPXI9

CDA Okap wyciągowy CPXI9

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CDA CPXI9 (4 stron) w kategorii Okap wyciągowy. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/4

CPXI9

Curved Glass Island Extractor

Manual for Installation, Use and Maintenance

The CDA Group Ltd

Harby Road

Langar

Nottinghamshire

NG13 9HY

Customer Care

Telephone: 01949 862012 Fax: 01949 862003 Email: service@cda.eu

Website: www.cda.eu

MAINS ELECTRICITY CONNECTION:

THIS APPLIANCE MUST BE CONNECTED TO THE MAINS SUPPLY BY A COMPETENT

PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWITCHED FUSED SPUR OUTLET

AND PROTECTED BY A 3A FUSE.

We recommend that the appliance is connected by a qualified electrician, who is a member of the

N.I.C.E.I.C. and who will comply with the I.E.E. and local regulations.

The wires in the mains lead of this appliance are coloured in accordance with the following code:

Blue = Neutral, Brown = Live.

As the colours of the wires in the mains lead for the appliance, may not correspond with the

coloured markings identifying the terminals connecting to the fused spur, proceed as follows:

1. The wire which is coloured blue must be connected to the

terminal marked N (Neutral), or coloured Black.

2. The wire which is coloured brown must be connected to the

terminal marked L (Live), or coloured Red.

Note: Use a 3A Fuse

Assembly and electrical connection should be carried out by specialised personnel.

When installing this product we recommend you seek the help of another individual

The manufacturer declares that this product meets all the essential requirements for low voltage

electrical material set out in European directive 2006/95/EEC of 12 December 2006 and for

electromagnetic compatibility as required by European directive 2004/108/EEC of 15 December

2004.

Use

For optimal performance, the extractor

should be switched on prior to cooking and

left running for approximately 15 minutes

after the end of cooking.

Five button control panel

This panel is situated on the front of the

extractor and includes:

On indicator for the light (A)

On/off button for the light (B)

Off button for the motor (C)

Speed 1, 2 and 3 switches for the motor (D)

Maintenance

IMPORTANT: Before any type of

maintenance, make sure that the power

to the extractor is switched off.

Cleaning

Clean the exterior of the extractor with a

mild liquid detergent and avoid the use of

abrasive cleaning products.

Cleaning the grease filter

Depending on use, and at least once a

month the grease filter should be

disassembled and cleaned with hot soapy

water. The filter can also be washed in a

dishwasher, and should be placed in an

upright position to prevent damage from

other items in the dishwasher. After rinsing

and drying, replace the ﬁlter.

Please note: Cleaning the filter in the

dishwasher may lead to discolouration. This

is purely cosmetic and does not affect in any

way the lifespan of the filter.

Changing the light

Remove the grease filter and replace the

light with a light bulb no more powerful than

that speciﬁed on the feature plate.

If the halogen lamps need replacing, they

must be replaced by lamps with an

aluminium reflector. Do not use dichroic

lamps to prevent unnecessary overheating

in the lamp holders.

The light is designed for use during cooking

and not for general room illumination.

Extended use of the light can reduce the

lifespan of the bulb.

Changing the charcoal filter

If the extractor is recirculating, rather than

ducting to the outside, the active charcoal

filter must be replaced periodically, at least

once every three months, to ensure the

extractor works properly.

THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR EVENTUAL DAMAGES

CAUSED BY FAILURE TO OBSERVE THESE INSTRUCTIONS.

The manufacturer reserves the right to effect any technological improvement or modification

without prior notice.

Specyfikacje produktu

Marka:	CDA
Kategoria:	Okap wyciągowy
Model:	CPXI9
Kolor produktu:	Stal nierdzewna
Liczba źródeł światła:	4 szt.
Typ kontroli:	obrotowy
Wysokość produktu:	1145 mm
Szerokość produktu:	900 mm
Głębokość produktu:	600 mm
Poziom hałasu:	62 dB
Lampy:	50 W
Model:	Naścienny
Prędkości:	3
Maksymalna moc ekstrakcji:	630 m³/h
Rodzaj ekstrakcji:	Kanałowe / obiegowe
Rodzaj filtra tłuszczu:	Metal
Moc silnika:	470 W
Wysokość (min):	845 mm
Wysokość (max.):	1145 mm
Ilość silników:	2