Instrukcja obsługi CAT CPI1000

CAT generator CPI1000

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CAT CPI1000 (14 stron) w kategorii generator. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
28
28
©2013 Caterpillar.
CAT, CATERPILLAR, their respective logos, “Caterpillar
Yellow,” “Caterpillar Corporate Yellow,” the “Power Edge” trade dress as well
as corporate and product identity used herein, are trademarks of Caterpillar
and may not be used without permission.
Baccus Global, a licensee of
Caterpillar, Inc.
©2013 Caterpillar. Caterpillar. CAT, CATERPILLAR, sus respectivos logotipos,
“Caterpillar Yellow”, “Caterpillar Yellow corporativa”, el “Power Edge” imagen
comercial así como la identidad corporativa y de producto aquí utilizados,
son marcas comerciales de Caterpillar y no pueden utilizarse sin autorización.
Baccus Global, un concesionario de la marca Caterpillar, Inc.
Baccus Global, LLC, 595 S. Federal Highway, Suite 210, Boca Raton, FL 33432
www.Baccusglobal.com
Toll-free / Línea gratuita: 855-806-9228 (855-806-9CAT) or International /
Internacional: 561-826-3677
Printed in China / Impreso en China
1000 WATT POWER INVERTER WITH
USB CHARGING PORTS INSTRUCTION MANUAL
INVERSEUR CA DE 1000 WATTS AVEC
PORTS DE CHARGE USB MODE D’EMPLOI
INVERSOR ELÉCTRICO DE 1000 VATIOS CON
PUERTOS DE CARGA USB MANUAL DE INSTRUCCIONES
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CONSERVE ESTE MANUAL PARA FUTURAS CONSULTAS.
CPI1000
English page 2
Español pagina 13
CPI1000_ManualENSP_101713.indd 28-1 10/17/2013 11:22:30 AM
2 3
2 3
Minimum Gauge for Cord Sets
Volts Total Length of Cord in Feet (Meters)
120V 0-25 26-50 51-100 101-150
(0-7.6m) (7.6-15.2m) (15.2-30.4m) (30.4-45.7m)
240V 0-50 51-100 101-200 201-300
(0-15.2m) (15.2-30.4m) (30.4-60.9m) (60.9-91.4m)
Ampere Rating
More Not more American Wire Gauge
Than Than
0 - 6 18 16 16 14
6 - 10 18 16 14 12
10 - 12 16 16 14 12
12 - 16 14 12 Not Recommended
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not connect to AC distribution wiring.
• Do not make any electrical connections or disconnections in areas designated as
IGNITION
PROTECTED.
This includes DC cigarette lighter type plug connection or airplane adapter. This unit is
NOT approved for ignition protected areas.
•
NEVER
immerse the unit in water or any other liquid, or use when wet.
• Do not insert foreign objects into the inverter’s AC outlets or USB charging port.
WARNING: TO REDUCE THE RISK OF FIRE:
• Do not replace any vehicle fuse with one of a rating higher than recommended by the vehicle
manufacturer. This product is rated to draw 10 amperes from a 12 volt vehicle accessory outlet. Ensure
that the electrical system in your vehicle can supply this without causing the vehicle fuse to open. This
can be determined by making sure the fuse in the vehicle that protects the outlet is rated higher than
10 amperes. Information about the vehicle fuse ratings are typically found in the vehicle operator’s
manual.
• If the vehicle fuse opens repeatedly, do not continue to replace it. Discontinue use of the vehicle
accessory outlet and locate the source of the overload. NEVER patch the fuse with tin foil, wire, or the
like, as this may cause serious damage elsewhere in the electrical circuit or cause a fire.
• Do not operate near flammable materials, fumes or gases.
• DO NOT expose to extreme heat or flames.
CAUTION: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
• Remove appliance plug from outlet before working on the appliance.
• DO NOT attempt to connect or set up the unit or its components while operating your vehicle. Not
paying attention to the road may result in a serious accident.
• Always use the inverter where there is adequate ventilation. Do not block ventilation slots.
• ALWAYS turn the inverter OFF by pressing the on/off button, then disconnecting it from the DC source
when not in use.
• Make sure the nominal powering voltage is 12 volts DC, center connection positive (+).
• When using this unit in a vehicle, check the vehicle owner’s manual for maximum power rating and
recommended output. Do not install in engine compartment — install in a well ventilated area.
• Do not use with positive ground electrical systems.* Reverse polarity connection will result in a blown
fuse and may cause permanent damage to the inverter and will void warranty.
*The majority of modern automobiles, RVs and trucks are negative ground.
• Keep in mind that this inverter will not operate high wattage appliances or equipment that produce
heat, such as hair dryers, microwave ovens and toasters.
• Do not open the inverter — there are no user-serviceable parts inside.
• Do not use this inverter with medical devices. It is not tested for medical applications.
• Keep away from children.This is not a toy!
• Install and operate unit only as described in this Instruction Manual.
• Do not use this inverter on a watercraft. It is not qualified for marine applications.
• Check unit periodically for wear and tear. Do not disassemble the unit; return it to the manufacturer
when service or repair is required. Opening the unit may result in a risk of electric shock or fire, and
will void warranty.
• Read And Understand This Instruction Manual Before Using This Unit.
SAVE THESE INSTRUCTIONS
SAFETY GUIDELINES / DEFINITIONS
DANGER:
Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, could result in death or
serious injury.
CAUTION:
Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION:
Used without the safety alert symbol indicates potentially hazardous situation which, if not
avoided, may result in property damage.
RISK OF UNSAFE OPERATION.
When using tools or equipment, basic safety precautions should
always be followed to reduce the risk of personal injury. Improper operation, maintenance or
modification of tools or equipment could result in serious injury and property damage. There are certain
applications for which tools and equipment are designed. Black & Decker strongly recommends that this
product NOT be modified and/or used for any application other than for which it was designed. Read
and understand all warnings and operating instructions before using any tool or equipment.
IMPORTANT SAFETY INSTRUCTIONS
GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL INVERTERS
READ ALL INSTRUCTIONS
WARNING:
Read all instructions before operating product. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
•
Avoid dangerous environments.
Don’t use appliances in damp or wet locations. Don’t use
appliances in the rain.
•
Store idle appliances indoors.
When not in use, appliances should be stored indoors in dry, and high
or locked-up place – out of reach of children.
•
Don’t force appliance.
It will do the job better and with less likelihood of a risk of injury at the rate for
which it was designed.
•
Use right appliance.
Do not use the appliance for any job except that for which it is intended.
•
Disconnect appliances.
Disconnect the appliance from the power supply when not in use,
before servicing, and when changing accessories such as blades and the like.
•
Proper cooling is essential when operating the inverter.
Do not place the unit near the vehicle’s
heat vent or in direct sunlight.
•
Use of accessories and attachments.
The use of any accessory or attachment not recommended
for use with this appliance could be hazardous. Note: refer to the accessory section of this manual for
further details.
•
Check damaged parts.
A part that is damaged should be properly repaired or replaced by
manufacturer.
•
Outdoor use extension cords.
When an appliance plugged into this unit is used outdoors, use only
extension cords intended for use outdoors and so marked.
•
Extension cords.
Make sure your extension cord is in good condition. When using an extension cord,
be sure to use one heavy enough to carry the current your product will draw. An undersized cord will
cause a drop in line voltage resulting in loss of power and overheating. The following table shows the
correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next
heavier gauge. The smaller the gauge number, the heavier the cord.
CPI1000_ManualENSP_101713.indd 2-3 10/17/2013 11:22:30 AM
4 5
4 5
5
PRE-DRILLED SCREW HOLE
FOR MOUNTING METAL PLATES
(TOTAL OF 4: 2 ON THE LEFT
AND 2 ON THE RIGHT)
UNDER RUBBER CAP (ABOVE)
WITH CAP REMOVED TO SHOW DETAIL (LEFT)
METAL PLATES
SCREWS FOR MOUNTING
METAL PLATES (X4)
O-RING WITH CABLES AND
SLIDE-IN CONNECTORS
WING NUTS AND BOLTS FOR
PERMANENT INSTALLATION
BOLT (X2)
WASHER (X2)
WING NUT (X2)
HOW THIS INVERTER WORKS
This inverter is an electronic device that converts low voltage DC (direct current) electricity from a
battery to 120 volts AC (alternating current) household power. It converts power in two stages.
The first stage is a DC-to-DC conversion process that raises the low voltage DC at the inverter input
to 145 volts DC. The second stage is a MOSFET bridge stage that converts the high voltage DC into
120 volts, 60 Hz AC.
Power Inverter Output Waveform
The AC output waveform of this inverter is known as a modified sine wave. It is a stepped waveform
that has characteristics similar to the sine wave shape of utility power. This type of waveform is suitable
for most AC loads, including linear and switching power supplies used in electronic equipment,
transformers, and small motors.
CAUTION – Rechargeable Devices
• Certain rechargeable devices are designed to be charged by plugging them directly into an AC
receptacle. These devices may damage the inverter or the charging circuit.
WARNING: TO REDUCE THE RISK OF INJURY OR PROPERTY DAMAGE:
Follow these instructions
and those published by battery manufacturer and the manufacturer of any equipment you intend to use
with this unit. Review cautionary markings on these products and on engine.
INTRODUCTION
Congratulations on purchasing your new
Cat®
1000 Watt Power Inverter
.
Read this Instruction
Manual and follow the instructions carefully before using your new inverter.
This power inverter is configured to supply continuous power in the form of two 120 volt AC outlets and
two 5 volt USB charging ports to run most household or electronic appliances.
Controls and Functions
THREE-PRONG 120
VOLT AC OUTLETS
VENTILATION SLOTS
USB CHARGING PORTS
1000W LED
INDICATOR
100W LED INDICATOR
ON/OFF BUTTON AND
POWER/FAULT INDICATOR
MOUNTING BRACKETS
(TOTAL OF 4: 2 ON THE
LEFT AND 2 ON THE RIGHT)
(RED) POSITIVE
CABLE POST
(UNDER CAP)
(BLACK) NEGATIVE
CABLE POST
(UNDER CAP)
HIGH-SPEED
COOLING FANS
(RED) POSITIVE POST
GROOVE
DC PORT (FOR USE WITH THE
12V DC VEHICLE ADAPTER PLUG)
(BLACK) NEGATIVE
POST GROOVE
12V DC VEHICLE ADAPTER
PLUG WITH DC DOUBLE-
BARREL CONNECTOR
BATTERY CLIPS WITH CABLES AND SLIDE-IN
CONNECTORS
CPI1000_ManualENSP_101713.indd 4-5 10/17/2013 11:22:31 AM

Specyfikacje produktu

Marka: CAT
Kategoria: generator
Model: CPI1000

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CAT CPI1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje generator CAT

CAT

CAT CPI1000 Instrukcja

10 Września 2024

Instrukcje generator

Najnowsze instrukcje dla generator

Jackery

Jackery SolarSaga 80 Instrukcja

9 Grudnia 2024
Westinghouse

Westinghouse WGen7500s Instrukcja

8 Grudnia 2024
Bavaria

Bavaria BPG 2500 Instrukcja

6 Grudnia 2024
Einhell

Einhell BT-PG 5500/2 D Instrukcja

4 Grudnia 2024
Einhell

Einhell KCST 2502 Instrukcja

4 Grudnia 2024
Einhell

Einhell KCST 2501 Instrukcja

4 Grudnia 2024
Einhell

Einhell BT-PG 3600 R Instrukcja

4 Grudnia 2024
Einhell

Einhell BT-PG 850/2 Instrukcja

4 Grudnia 2024
Einhell

Einhell BT-PG 850/1 Instrukcja

4 Grudnia 2024
Einhell

Einhell RT-PG 850 Instrukcja

4 Grudnia 2024