Instrukcja obsługi Casio Exilim EX-Z800

Casio kamera Exilim EX-Z800

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio Exilim EX-Z800 (187 stron) w kategorii kamera. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/187

To go to “Getting the Most Out of Dynamic Photo” click here!

Thank you for purchasing this CASIO product.

• Before using it, be sure to read the precautions contained in this User’s Guide.

• Keep the User’s Guide in a safe place for future reference.

• For the most up-to-date information about this product, visit the official EXILIM

Website at http://www.exilim.com/

Digital Camera

User’s Guide

As you unpack your camera, check to make sure that all items shown below are

included. If anything is missing, contact your original retailer.

Unpacking

Digital camera Rechargeable lithium ion

battery (NP-80) Charger unit (BC-81L)

Power cord Strap

USB cable AV cable CD-ROM Quick Start Guide

To attach the strap to the camera

Attach strap here.

• The contents of this manual and the bundled Quick Start Guide are subject to

change without notice.

• The contents of this manual have been checked at each step of the production

process. Feel free to contact us if you notice anything that is questionable,

erroneous, etc.

• Any copying of the contents of this User’s Guide, either in part or its entirety, is

forbidden. Except for your own personal use, any other use of the contents of this

manual without the permission of CASIO COMPUTER CO., LTD. is forbidden

under copyright laws.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost

profits suffered by you or any third party due to the use or malfunction of this

product.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost

profits, or claims by third parties arising out of the use of Photo Transport or

YouTube Uploader for CASIO.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost

profits caused by loss of memory contents due to malfunction, repair, or any other

reason.

• Note that the example screens and product illustrations shown in this User’s Guide

may differ somewhat from the screens and configuration of the actual camera.

LCD Panel

The liquid crystal panel of the monitor screen uses high-precision technology that

provides a pixel yield in ex that some very small number cess of 99.99%. This means

of pixels may not light or may remain lit at all times. This is due to the characteristics

of the liquid crystal panel, and does not indicate malfunction.

Read this first!

Take a few test shots

Before shooting your final image, shoot a test shot to ensure that the camera is

recording correctly.

4Contents

Contents

Unpacking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Monitor Screen Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

❚

Configuring Monitor Screen Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

❚❙

Quick Start Basics 14

What is a digital camera? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . 15

First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

❚

To charge the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

❚

To load the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . 19

Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

❚

Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

❚

To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

❚

To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Turning the Camera On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

❚

To turn power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

❚

To turn off the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Holding the Camera Correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

To shoot a snapshot. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

❚

Selecting an Auto Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

❚

To shoot a snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

❚

To delete a single file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

❚

To delete specific files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

❚

To delete all files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

❚

Auto Focus Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

❚❙

Snapshot Tutorial 33

Using the Control Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Size) . . 34

Using Flash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Flash) . . 38

Selecting a Focus Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Focus) . . 40

Specifying the Auto Focus Area . . . . . . . . . . . . . . . . . . . . . . . . (AF Area) . . 43

Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . 45

Using Face Detection . . . . . . . . . . . . . . . . . . . . . . . . . . . (Face Detection) . . 46

Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

❚

Interpreting the Zoom Bar. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48

❚

Zooming with Minimal Loss of Snapshot Resolution . . . .(Single SR Zoom) . . . 49

5Contents

❚❙

Recording Movie Images and Audio 50

To record a movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Using Prerecord Movie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Shooting a Snapshot while Shooting a Movie . . . . . . . . . . . . . . . . . . . . . . . . 53

Recording Audio Only . . . . . . . . . . . . . . . . . . . . . . . . . . (Voice Recording) . . 53

❚

To play back an audio recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

❚❙

Using BEST SHOT 55

What is BEST SHOT? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

❚

Some Sample Scenes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

To shoot an image with BEST SHOT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

❚

Creating Your Own BEST SHOT Setups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Shooting ID Photographs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Shooting Images of White board, etc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Recording a Self-portrait . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Isolating Moving Subjects . . . . . . . . . . . . . . . . . . . . . (Multi-motion Image) . . 62

❚❙

Advanced Settings 63

Using On-screen Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

REC Mode Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (REC) . . 65

❚

Reducing the Effects of Camera and Subject Movement . . . . (Anti Shake). . . 65

❚

Using Continuous Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (CS). . . 66

❚

Displaying the On-screen Grid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Grid) . . . 67

❚

Changing the Focus Frame Shape . . . . . . . . . . . . . . . . . . . (Focus Frame). . . 68

❚

Using Auto Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Auto Shutter). . . 69

❚

Using Icon Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Icon Help). . . 72

❚

Configuring Power On Default Settings . . . . . . . . . . . . . . . . . . . . (Memory). . . 73

Image Quality Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quality) . . 74

❚

Enabling Super Resolution Quality for Snapshots . . . . .(Single SR Quality). . . 74

❚

Zooming with Minimal Loss of Snapshot Resolution . . . .(Single SR Zoom). . . 74

❚

Specifying Snapshot Image Quality . . . . . . . . . . . . . . . (Quality (Snapshot)) . . . 74

❚

Recording Beautiful Images of People and Scenery . . . . . . . . . . . . (Effect). . . 75

❚

Correcting Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (EV Shift). . . 77

❚

Controlling White Balance . . . . . . . . . . . . . . . . . . . . . . . . . (White Balance). . . 78

❚

Specifying ISO Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(ISO). . . 79

❚

Optimizing Image Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Lighting). . . 80

❚

Using Built-in Color Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Color Filter). . . 80

6Contents

❚❙

Viewing Snapshots and Movies 81

Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

❚

Editing a Movie on the Camera . . . . . . . . . . . . . . . . . . . . . . (Movie Editing) . . . 82

Viewing Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

❚

Deleting Continuous Shutter Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

❚

Dividing Up a CS Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Displaying the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Displaying Images in the Calendar Screen . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Viewing Snapshots and Movies on a TV Screen. . . . . . . . . . . . . . . . . . . . . . 88

❚❙

Other Playback Functions (PLAY) 90

Using the PLAY Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Playing a Slideshow on the Camera . . . . . . . . . . . . . . . . . . . . (Slideshow) . . 92

❚

Saving Music from Your Computer to Camera Memory . . . . . . . . . . . . . . . . . . . 93

Applying an Artistic Effect . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Art Effect) . . 95

Selecting Images for Printing . . . . . . . . . . . . . . . . . . . . . (DPOF Printing) . . 95

Protecting a File Against Deletion . . . . . . . . . . . . . . . . . . . . . . . . (Protect) . . 96

Editing the Date and Time of an Image . . . . . . . . . . . . . . . . . (Date/Time) . . 97

Rotating an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Rotation) . . 97

Resizing a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Resize) . . 98

Cropping a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Trimming) . . 98

Adding Audio to a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . (Dubbing) . . 99

❚

To play snapshot audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Copying Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Copy) . 100

❚❙

Dynamic Photo 101

To create a subject image to be inserted . . . . . . . . . . . . (Dynamic Photo) . 101

❚

Extracting Text from an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

Inserting a Subject into a Snapshot or Movie . . . . . . . . . (Dynamic Photo) . 105

❚

To view a Dynamic Photo . . . . . . . . . . . . . . . . . . . . . . (Dynamic Photo File). . 106

Converting a Dynamic Photo Still Image to a Movie . . . (Movie Converter) . 107

❚❙

Printing 108

Printing Snapshots. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Connecting Directly to a PictBridge Compatible Printer . . . . . . . . . . . . . . . 109

Using DPOF to Specify Images to be Printed and the Number of Copies . . .111

7Contents

❚❙

Using the Camera with a Computer 114

Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114

Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . 115

❚

Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . 116

❚

Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119

❚

Uploading Movie Files to YouTube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

❚

Transferring Images from Your Computer to Camera Memory. . . . . . . . . . . . . 122

❚

Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . (PDF Files). . 124

❚

User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125

❚

Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . 125

❚

Transferring Images Automatically and Managing Them on Your Macintosh. . 128

❚

Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128

❚

Viewing User Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . .(PDF Files) . . 129

❚

User Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129

Using an Eye-Fi Wireless SD Memory Card to Transfer Images . (Eye-Fi) . 129

Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132

❚❙

Other Settings (Set Up) 134

Changing the Menu Screen Color . . . . . . . . . . . . . . . . . . . . (Menu Color) . 134

Turning off Eye-Fi Card Communication . . . . . . . . . . . . . . . . . . . . (Eye-Fi) . 134

Configuring Camera Sound Settings . . . . . . . . . . . . . . . . . . . . . (Sounds) . 135

Configuring a Startup Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Startup) . 135

Specifying the File Name Serial Number Generation Rule . . . . . (File No.) . 136

Creating an Image Storage Folder . . . . . . . . . . . . . . . . . . (Create Folder) . 136

Configuring World Time Settings . . . . . . . . . . . . . . . . . . . . . (World Time) . 137

Time Stamping Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . (Timestamp) . 138

Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . 138

Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . 139

Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . 139

Configuring Sleep State Settings . . . . . . . . . . . . . . . . . . . . . . . . . (Sleep) . 140

Configuring Auto Power Settings . . . . . . . . . . . . . . . . . . (Auto Power Off) . 141

Configuring [r] and [p] Settings . . . . . . . . . . . . . . . . . . . (REC/PLAY) . 141

Disabling File Deletion . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Ü Disabled) . 142

Configuring USB Protocol Settings . . . . . . . . . . . . . . . . . . . . . . . . . (USB) . 142

Selecting the Screen Aspect Ratio and

Video Output System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Video Out) . 143

Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . (Format) . 144

Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . (Reset) . 144

8Contents

❚❙

Appendix 145

Precautions during Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145

Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

❚

Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

❚

To replace the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

❚

Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

❚

Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

❚

To replace the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154

Computer System Requirements for

Bundled Software . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Bundled CD-ROM) . 156

Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157

When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

❚

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 159

❚

Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164

Number of Snapshots/Movie Recording Time/Voice Recording Time . . . . . 167

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169

The numbers in parentheses indicate the pages where each item is explained.

.Camera

General Guide

421 3 5

[ ]

[

SET

]

blbk98

bsbt

bobpbqbr

1Zoom controller

(pages 26, 47, 87, 88)

2Shutter button (page 25)

3[ON/OFF] (Power)

(page 23)

4Flash (page 38)

5Front lamp (pages 45)

6Lens

7Microphone

(pages 51, 99)

8[AUTO] button (page 25)

9Back lamp

(pages 23, 26, 38)

bk[0] (Movie) button

(page 50)

bl Connector cover

USB/AV port (pages

88, 109, 117, 126)

bnStrap hole (page 2)

bo[SET] button (page 33)

bp[ ] (Delete) button

(page 30)

[p] (PLAY) button

(pages 23, 29)

brControl button

([8] [2] [4] [6])

(pages 13, 30, 33, 38,

63)

bs[r] (REC) button

(pages 23, 25)

btMonitor screen

(pages 11, 13)

Back

ckBattery/memory card slots (pages 17, 21, 153, 154)

cl Tripod hole

Use this hole when attaching to a tripod.

Speaker

Front

ckclcm

Bottom

.Charger Unit

1+7- Contacts

2[CHARGE] Lamp

3AC jack

The monitor screen uses various indicators, icons, and values to keep you informed

of the camera’s status.

• The sample screens in this section are intended to show you the locations of all the

indicators and figures that can appear on the monitor screen in various modes.

They do not represent screens that actually appear on the camera.

. Snapshot Recording

Monitor Screen Contents

1Remaining snapshot memory

capacity (page 167)

2Remaining movie memory capacity

(page 50)

3Recording mode (page 25)

4White balance setting (page 78)

5CS (page 66)

6Zoom/Single SR Quality indicator

(pages 48, 74)

7Metering mode (page 169)

8Snapshot image size (page 34)

9Snapshot image quality (page 74)

bkMovie image quality (page 37)

bl Flash (page 38)

Focus (page 40)

bnAF Area (page 43)

boSelf-timer (page 45)

bpFace Detection/Make-up/Landscape

(pages 46, 75, 76)

bqDate/time (page 138)

brShutter speed

bsExposure compensation (page 77)

bt Aperture value

ckISO sensitivity (page 79)

cl Timestamp indicator (page 138)

Battery level indicator (page 18)

cnFocus frame (pages 26, 44)

coAnti Shake (page 65)

cpAuto shutter (page 69)

NOTE

• If the current aperture, shutter speed, ISO sensitivity, or Auto Exposure is not

correct, the setting will turn orange when you half-press the shutter button.

89341 65 72

cl bsbtck br

. Movie Recording

. Snapshot Viewing

. Movie Playback

1Flash (page 38)

2Recording mode (page 50)

3White balance setting (page 78)

4Remaining movie memory capacity (page 50)

5Movie recording time (page 50)

6Exposure compensation (page 77)

7Battery level indicator (page 18)

1File type

2Protect indicator (page 96)

3Folder name/file name (page 131)

4Snapshot image quality (page 74)

5Snapshot image size (page 34)

6ISO sensitivity (page 79)

7Aperture value

8Shutter speed

9Date/time (page 138)

bkBattery level indicator (page 18)

1File type

2Protect indicator (page 96)

3Folder name/file name (page 131)

4Movie recording time (page 81)

5Movie image quality (page 37)

6Date/time (page 138)

7Battery level indicator (page 18)

1 2 3

7 6

2 3

You can turn display information on and off by pressing [8] (DISP). You can

configure separate settings for the REC mode and PLAY mode.

Configuring Monitor Screen Settings

Information display on Displays information about image settings, etc (REC

mode only).

Information display +

Date/Time on

In addition to information about snapshot settings,

displays movie setting information and the date/time

screen.

• You can specify the date style you want to use

(page 139).

Information display off No information displayed

14 Quick Start Basics

Quick Start Basics

What is a digital camera?

Delete

A digital camera stores images on a memory card, so you can record and

delete images a countless number of times.

Play

Record

You can use the images you record in a variety of different ways.

Store images on your

computer.

Print images. Attach images to e-mail.

15 Quick Start Basics

Your CASIO camera is packed with a powerful selection of features and functions to

make recording of digital images easier, including the following three main functions.

What you can do with your CASIO camera

Simply select the sample scene you want and the

camera sets up automatically. Then all you need do is

press the shutter button for perfect images.

See page 55 for more information.

BEST SHOT

See page 101 for more information.

Advanced Dynamic Photo

Extract people or objects out of images you shoot and insert them into another

snapshot or movie (background). You can even insert a moving subject to

create true Dynamic Photo images.

Select Premium Auto recording and the camera automatically determines

whether you are shooting a subject or scenery, and other conditions. Premium

Auto delivers higher image quality than standard Auto.

Premium Auto

See page 25 for more information.

16 Quick Start Basics

Note that the battery of a newly purchased camera is not charged. Perform the steps

under “To charge the battery” to bring the battery to a full charge.

• Your camera requires a special CASIO rechargeable lithium ion battery (NP-80) for

power. Never try to use any other type of battery.

1. Positioning the positive + and

negative - terminals of the

battery with those of the charger

unit, load the battery into the

charger unit.

2. Plug the charger unit into a

household power outlet.

About 210 minutes are required to

reach full charge. The [CHARGE]

lamp will go out when charging is

complete. Unplug the power cord

from the power outlet and then

remove the battery from the

charger.

First, charge the battery prior to use.

To charge the battery

Lamp Status Description

Lit Red Charging

Flashing Red Abnormal ambient temperature, charger problem, or

battery problem (page 152)

Off Charging complete

[CHARGE] lamp

17 Quick Start Basics

Other Charging Precautions

• Use the special charger (BC-81L if included with camera, BC-80L if purchased

separately) to charge the special lithium ion battery (NP-80). Never use any other

type of charger device. Attempting to use a different charger can result in

unexpected accident.

• A battery that is still warm due to normal use may not charge fully. Give the battery

time to cool before charging it.

• A battery discharges slightly even when it is not loaded in the camera. Because of

this, it is recommended that you charge the battery immediately before you need to

use it.

• Charging the camera’s battery may cause interference with TV and radio reception.

If this happens, plug the charger into an outlet that is further away from the TV or

radio.

• Actual charging time depends on current battery capacity and charging conditions.

1. Open the battery cover.

Pressing the battery cover, slide it in

the direction indicated by the arrow.

2. Load the battery.

With the EXILIM logo on the

battery facing upwards (in the

direction of the monitor

screen), hold the stopper next

to the battery in the direction

indicated by the arrow as you

slide the battery into the

camera. Press the battery in

until the stopper secures it in

place.

3. Close the battery cover.

Pressing the battery cover against the

camera, slide it closed.

• For information about how to replace

the battery, see page 153.

To load the battery

EXILIM logo

Stopper

Back

Battery contacts

Front

18 Quick Start Basics

Checking Remaining Battery Power

As battery power is consumed, a battery indicator on the monitor screen indicates

remaining power as shown below.

indicates battery power is low. Charge the battery as soon as possible.

Recording is not possible when is indicated. Charge the battery immediately.

• The level shown by the battery indicator may change when you switch between the

REC mode and PLAY mode.

• Leaving the camera for about 30 days with no power supplied while the battery is

dead will cause its date and time settings to be cleared. A message telling you to

configure time and date settings will appear the next time you turn on the camera

after restoring power. When this happens, configure date and time settings (page

138).

• See page 171 for information about battery life and memory capacity.

Battery Power Conservation Tips

• When you do not need to use the flash, select ? (Flash Off) for the flash setting

(page 38).

• Enable the Auto Power Off and the Sleep features to protect against wasting

battery power when you forget to turn off the camera (pages 140, 141).

Remaining Power High Low

Battery Indicator ***

Indicator Color Cyan *Amber *Red Red*

19 Quick Start Basics

The first time you load a battery into the camera, a screen appears for configuring the

display language, date, and time settings. Failure to set the date and time correctly

will cause the wrong date and time data to be recorded with images.

IMPORTANT!

• A screen for language selection will not appear in step 2 of the procedure below if

you purchased a camera intended for the Japanese market. To change the display

language from Japanese in this case, use the procedure under “Specifying the

Display Language (Language)” (page 139). Note that a version of this manual in

the language you select may not be included with a camera intended for the

Japanese market.

• Camera models sold in certain geographic areas may not support display language

selection.

1. Press [ON/OFF] (Power) to turn on the

camera.

2. Use [ ] to select 8], [2], [4], and [6

the language you want and then press

[SET].

3. Use [8] and [2] to select a date style and then press [SET].

Example: July, 10, 2012

YY/MM/DD

* 12/7/10

DD/MM/YY

* 10/7/12

MM/DD/YY

* 7/10/12

4. Set the date and the time.

Use [4] and [6] to select the setting you want to

change and then use [8] and [2] to change it.

To switch between 12-hour and 24-hour format, press

[0] (Movie).

5. After setting the date and time, use [4] and [6]

to select “Apply” and then press [SET].

Configuring Basic Settings the First Time You Turn On the

Camera

SET

[ON/OFF] (Power)

[0] (Movie)

21 Quick Start Basics

1. Press [ON/OFF] (Power) to turn off

the camera and then open the

battery cover.

Pressing the battery cover, slide it in the

direction indicated by the arrow.

2. Load a memory card.

Positioning the memory card so its front

is facing upwards (towards the monitor

screen side of the camera), slide it into

the card slot all the way in until you hear

it click securely into place.

3. Close the battery cover.

Pressing the battery cover against the

camera, slide it closed.

• For information about how to replace

the memory card, see page 154.

IMPORTANT!

• Never insert anything besides a supported memory card (page 20) into the memory

card slot.

• Should water or any foreign object ever get into the card slot, immediately turn off

the camera, remove the battery, and contact your retailer or nearest CASIO

authorized service center.

To load a memory card

Front Back

Front

22 Quick Start Basics

You need to format a new memory card before using it for the first time.

1. Press [ON/OFF] (Power) to turn on the camera and then press [SET].

2. Use [8] and [2] to select the second Control Panel option from the

bottom (MENU) and then press [SET] (page 33).

3. Use [4] and [6] to select the “Set Up” tab.

4. Use [8] and [2] to select “Format” and then press [6].

5. Use [8] and [2] to select “Format” and then press [SET].

IMPORTANT!

• Formatting a memory card that already has snapshots or other files on it, will delete

its contents. Normally you do not need to format a memory card again. However, if

storing to a card has slowed down or if you notice any other abnormality, re-format

the card.

• Be sure to use the camera to format a memory card. Formatting a memory card on

a computer and then using it in the camera can slow down data processing by the

camera. In the case of an SD or SDHC memory card, formatting on a computer can

result in non-conformity with the SD format, causing problems with compatibility,

operation, etc.

• Before formatting a new Eye-Fi card to use it for the first time, copy the Eye-Fi

Manager install files to your computer. Do this before formatting the card.

To format (initialize) a new memory card

23 Quick Start Basics

• Take care to ensure that nothing is restricting or

coming into contact with the lens as it extends. Holding

the lens with your hand so it cannot extend creates the

risk of malfunction.

• Pressing [p] (PLAY) while in the REC mode switches

to the PLAY mode. The lens retracts about 10 seconds after switching modes.

• The Sleep function or Auto Power Off (pages 140, 141) will turn off power

automatically if you do not perform any operation for a preset amount of time.

Press [ON/OFF] (Power).

• You can configure the camera so power does not turn on when you press [ ] r

(REC) or [p] (PLAY). You also can configure the camera to turn off when you

press [r] (REC) or [p] (PLAY) (page 141).

Turning the Camera On and Off

To turn power on

To turn on power

and enter the

REC mode

Press [ON/OFF] (Power) or

[r] (REC).

• The back lamp will light green

momentarily and the lens will

extend out of the camera (page 26).

To turn on power

and enter the

PLAY mode

Press [p] (PLAY).

• The back lamp will light green

momentarily and an image currently

stored in camera memory will

appear on the monitor screen (page

29).

To turn off the camera

[ON/OFF] (Power)

Back lamp

[p] (PLAY) [r] (REC)

24 Quick Start Basics

Your images will not come out clearly if you move the camera when you press the

shutter button. When pressing the shutter button, be sure to hold the camera as

shown in the illustration below, and keep it still by pressing your arms firmly against

your sides as you shoot.

Holding the camera still, carefully press the shutter button and take care to avoid all

movement as the shutter releases and for a few moments after it releases. This is

especially important when available lighting is low, which slows down the shutter

speed.

NOTE

• Take care that your fingers and the strap do not

cover any of the areas indicated in the illustration.

• To protect against accidentally dropping the

camera, attach the wrist strap and make sure it is

around your fingers or wrist while you are operating

the camera.

• Never swing the camera around by its strap.

• The supplied strap is intended for use with this

camera only. Never use it for any other purpose.

IMPORTANT!

• Take care to ensure that your fingers are not

blocking or are not too close to the flash. Fingers can

cause unwanted shadows when using the flash.

Holding the Camera Correctly

Horizontal Vertical

Hold the camera so the flash is

above the lens.

Flash

Front lamp

Lens

Microphone

25 Quick Start Basics

You can select one of two auto recording modes (Auto or Premium Auto) according to

your digital imaging needs.

1. Press [r] (REC) to turn on the camera.

The camera will enter the REC mode.

2. Use [AUTO] to select Auto recording mode.

Each press of [AUTO] toggles between Auto (r) and Premium Auto (Ÿ).

• Selecting the “Auto” or “Premium Auto” BEST SHOT scene will change the

current auto recording setting accordingly (page 55).

To shoot a snapshot

Selecting an Auto Recording Mode

Auto This is the standard Auto recording mode.

• It provides faster operation than Premium Auto recording.

Premium Auto

With Premium Auto recording, the camera automatically

determines whether you are shooting a subject or scenery,

and other conditions. Premium Auto recording delivers higher

image quality than standard Auto recording.

• Premium Auto recording takes longer to process image data

after it is shot than Auto recording.

• It also requires more power (and runs down the battery

quicker) than Auto.

Auto recording mode icon

Remaining Snapshot Memory

Capacity (page 167)

Monitor screen

Shutter button

[r] (REC)

[AUTO]

26 Quick Start Basics

1. Point the camera at the subject.

If you are using Premium Auto, text will appear in the

lower right corner of the monitor screen describing the

type of shot the camera has detected.

• You can zoom the image, if you want.

To shoot a snapshot

2. Half-press the shutter button to

focus the image.

When focus is complete, the camera

will beep, the back lamp will light green,

and the focus frame will turn green.

When you half-press the shutter button, the

camera automatically adjusts exposure and

focuses on the subject it is currently pointed at.

Mastering how much pressure is required for a

half-press and a full-press of the shutter button

is an important technique for good-looking

images.

• The focus frame in the screen shots included

in this manual is shown at ß. Note that you

can change the form of the focus frame, if

you want (page 68).

Appears when the

camera detects it is

stationary on a tripod.

w z Wide Angle Telephoto

Zoom controller

Focus frame

Back lamp

Half-press

Press lightly

until the

button stops.

Beep, beep (Image is in focus.)

27 Quick Start Basics

3. Continuing to keep the camera still, press the shutter button the rest of

the way down.

This records the snapshot.

. If the image does not focus...

If the focus frame stays red and the back lamp is flashing green, it means that the

image is not in focus (because the subject is too close, etc.). Re-point the camera at

the subject and try to focus again.

. Shooting with Auto

If the subject is not in the center of the frame...

“Focus lock” (page 42) is the name of a technique you can use when you want to

shoot an image in which the subject to be focused on is not within the focus frame in

the center of the screen.

To track the movement of a moving subject

Half-press the shutter button to follow and focus automatically on a moving subject.

See “Ë Tracking” (page 43) for more information.

Recording a Movie

Press [0] (Movie) to start

movie recording. Press

[0] (Movie) again to stop

movie recording. See

page 50 for details.

Full-press

Snap (Image is recorded.)

[0] (Movie)

28 Quick Start Basics

. Shooting with Premium Auto

• In addition to shutter speed, aperture, and ISO sensitivity, the camera

automatically executes the following operation as required when shooting with

Premium Auto.

– Auto Focus is normally performed until you half-press the shutter button.

– Intelligent AF (Page 43)

– Face Detection (Page 46)

– Make-up/Landscape (Pages 75, 76)

• Shooting with Premium Auto can cause vibration and noise to occur due to lens

operation. This does not indicate malfunction.

• When Shooting with Premium Auto, the message “Processing Premium Auto.

Please wait...” may appear on the monitor screen. If you feel the camera is taking

too long to process data, try shooting with standard Auto instead.

• In some cases, Premium Auto may not be able to interpret the shooting

environment correctly. If this happens, shoot with standard Auto.

29 Quick Start Basics

Use the following procedure to view snapshots on the camera’s monitor screen.

• For information about how to play back movies, see page 81.

1. Press [p] (PLAY) to enter the

PLAY mode.

• This will display one of the snapshots

currently stored in memory.

• Information about the displayed

snapshot also is included (page 167).

• You also can clear the information to

view only the snapshot (page 13).

• You can zoom in on the image by

sliding the zoom controller towards z (page 87). If you are recording a

snapshot that is very important to you, it is recommended that you zoom the

image and check its details after recording it.

2. Use [4] and [6] to scroll between images.

• Holding down either button scrolls at high speed.

NOTE

• Half-pressing the shutter button while in the PLAY mode or while a menu screen is

displayed will switch directly to the REC mode.

Viewing Snapshots

[p] (PLAY)

[ ]6[ ]6

[ ]4[ ]4

30 Quick Start Basics

If memory becomes full, you can delete snapshots and movies you no longer need in

order to free up storage and record more images.

• In either the REC mode or PLAY mode, you can delete files

simply by pressing [ ] (Delete).

IMPORTANT!

• Remember that a file (image) delete operation cannot be

undone.

• Deleting an audio snapshot (page 99) deletes both the

snapshot and the audio file.

• You cannot delete files while movie or audio recording is in progress.

• The delete menu will not appear if you press [ ] (Delete) while “On” is selected for

the camera’s “Ü Disabled” setting (page 142). You can delete files only while “Off”

is selected for “Ü Disabled”.

1. Press [ ] (Delete).

2. Use [4] and [6] to scroll through the files until the one

you want to delete is displayed.

3. Use [8] and [2] to select “Delete” and then press [SET].

• To delete other files, repeat steps 2 and 3.

• To exit the delete operation, press [ ] (Delete).

1. Press [ ] (Delete).

2. Use [8] and [2] to select “Delete Files” and then press [SET].

• This displays a file selection screen.

3. Use [8], [2 4 6], [ ], and [ ] to move the selection boundary to the file

you want to delete, and then press [SET].

• This will select the check box of the currently selected file.

4. Repeat step 3 to select other files, if you want. After you are finished

selecting files, press [ ] (Delete).

5. Use [8] and [2] to select “Yes” and then press [SET].

• This deletes the files you selected.

• To exit the delete operation, press [ ] (Delete).

Deleting Snapshots and Movies

To delete a single file

To delete specific files

[ ] (Delete)

31 Quick Start Basics

1. Press [ ] (Delete).

2. Use [8] and [2] to select “Delete All Files” and then press [SET].

3. Use [8] and [2] to select “Yes” and then press [SET] to delete all files.

This will cause the message “There are no files” to appear.

Operation

• Never open the battery cover while the back lamp is flashing green. Doing so can

result in the image you just shot being saved incorrectly, damage to other images

stored in memory, malfunction of the camera, etc.

• If unwanted light is shining directly onto the lens, shade the lens with your hand

when shooting an image.

Monitor Screen when Shooting Snapshots

• Subject brightness conditions can cause monitor screen response to slow and can

cause digital noise in the monitor screen image.

• The image that appears on the monitor screen is for image composition. The actual

image will be recorded at the quality set for the image quality setting (page 74).

Shooting Indoors under Fluorescent Lighting

• Minute flickering of fluorescent lighting can affect the brightness or color of an

image.

To delete all files

Snapshot Shooting Precautions

32 Quick Start Basics

• Any of the following can make proper focus impossible.

– Solid color wall or other very low contrast subject

– Strongly back lit subject

– Very shiny subject

– Blinds or other subject with a repeating horizontal pattern

– Multiple subjects at varying distances from the camera

– Subject in a dark location

– Camera movement while shooting

– Fast-moving subject

– Subjects outside the focus range of the camera

• If you cannot focus properly, try using focus lock (page 42) or Manual Focus (page

40).

Auto Focus Restrictions

33 Snapshot Tutorial

Snapshot Tutorial

The Control Panel can be used to configure camera settings.

1. In the REC mode, press [SET].

This will select one of the Control Panel icons and display its settings.

2. Use [8] and [2] to select the setting you want to change.

*Snapshot image quality cannot be changed using the Control Panel.

3. Use [4] and [6] to change the setting.

4. If you want to configure another setting, repeat steps 2 and 3.

5. After all of the settings are the way you want, press [SET].

This will apply the settings and return to the REC mode.

If you selected “MENU”, the REC menu will appear.

If you selected “BS”, the BEST SHOT scene menu will appear.

• You can close the Control Panel by pressing [ ] (Delete).

Using the Control Panel

Control Panel

Available settings

[SET]

[ ]8] [2] [4] [6

1Snapshot image size/quality*

(pages 34, 74)

2Movie image quality (page 37)

3Flash (page 38)

4Focus (page 40)

5AF Area (page 43)

6Self-timer (page 45)

7Face Detection/Make-up/Landscape

(pages 46, 75, 76)

8REC menu display (page 63)

9BEST SHOT scene selection

(page 55)

34 Snapshot Tutorial

NOTE

• No icon is displayed for any Control Panel option (page 11) that is set to its initial

default (reset) setting. An icon will appear only if you change the setting of the

corresponding Control Panel option. The following are the initial defaults for Control

Panel options.

– Flash: Auto Flash

– Focus: Auto Focus

– AF Area: Spot

– Self-timer: Off

– Face Detection: Off

• You also can configure settings other than those listed above (page 63).

.Pixels

A digital camera image is a collection of small

dots called “pixels”. The more pixels there are

in an image, the more detail there will be.

However, you generally can do with fewer

pixels when printing an image (L size) through

a print service, attaching an image to e-mail,

when viewing the image on a computer, etc.

.About image sizes

The size of an image indicates how many pixels it contains, and is expressed as

horizontal pixelsxvertical pixels.

Changing the Image Size (Size)

10M (3648x2736) size image =

Approximately 10 million pixels

*Unit: pixels

VGA (640x480) size image =

Approximately 300,000 pixels

Pixel

3648*

2736*

640*

480*

35 Snapshot Tutorial

Image Size Selection Tips

Note that larger images have more pixels, so they take up more memory space.

• For information about image size, image quality, and number of images that can be

stored, see page 167.

• For information about movie image size, see page 37.

• For information about resizing existing snapshots, see page 98.

Large Number

of Pixels

More detail, but takes up more memory. Best

when you plan to print large-size prints (such

as A3 size).

Small Number

of Pixels

Less detail, but takes up less memory. Best

when you want to send images by e-mail,

etc.

36 Snapshot Tutorial

.To select the snapshot image size

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the top Control Panel option (Snapshot

Image Size).

3. Use [4] and [6] to select an image size and then press [SET].

• The initial factory default image size setting is “14M”.

• Selecting “3:2” records images with an aspect ratio of 3:2, which matches the

standard aspect ratio of print paper.

• The letters “HDTV” stand for “High Definition Television”. An HDTV screen has an

aspect ratio of 16:9, which makes them wider than the usual 4:3 aspect ratio of

television screens of the past. Your camera can record images that are compatible

with the aspect ratio an HDTV screen.

• You should regard the print paper sizes suggested here as guidelines only (200 dpi

print resolution).

Image Size

(Pixels)

Suggested

Print Size and

Application

Description

14M

(4320x3240) Poster Print

Good detail for better clarity even for images

cropped (page 98) from the original

3:2

(4320x2880) Poster Print

16:9

(4320x2432) HDTV

10M

(3648x2736) Poster Print

Good detail

(2816x2112) A3 Print

(2048x1536) 3.5"x5" Print Best when preserving memory capacity is

relatively more important than image quality.

VGA

(640x480) E Mail

Image files are smaller, which is better when

attaching images to e-mail. However, images

are relatively coarser.

37 Snapshot Tutorial

.Specifying Movie Image Quality

Movie image quality is a standard that determines the detail, smoothness, and clarity

of a movie during playback. Shooting with the high-quality (HD) setting will result in

better image quality, but it also shortens the amount of time you can shoot.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the second Control Panel option from the top

(Movie Image Quality).

3. Use [4] and [6] to select the setting you want and then press [SET].

• The 16:9 aspect ratio is available only when “HD” is selected as the image quality.

• Memory capacity (Movie recording time you can shoot) will be affected by the

quality settings you configure (page 168).

Image Quality (Pixels) Approximate Data Rate Frame Rate

HD 1280x720 18.2 Megabits/second 20 frames/second

STD 640x480 12.2 Megabits/second 30 frames/second

38 Snapshot Tutorial

1. In the REC mode, press [2] ( ) once.

2. Use [4] and [6] to select the flash

setting you want and then press [SET].

• If there are no indicators on the monitor

screen, you can cycle through the flash

modes by pressing [2] ( ). You can turn

display information on or off by pressing

[8] (DISP) (page 13).

3. Press the shutter button to shoot.

• For information about Flash Range, see page 170.

Using Flash (Flash)

Auto Flash Flash fires automatically in accordance with exposure

(amount of light and brightness) conditions.

Flash Off Flash does not fire.

Flash On

Flash always fires. This setting can be used to brighten a

subject that normally comes out dark due to daylight or

backlight (daylight synchro flash).

Soft Flash Soft flash always fires, regardless of exposure conditions

Red Eye

Reduction

Flash fires automatically. This type of flash can be used to

reduce the chance of redness in the subject’s eyes.

Flash

[2] ( )

Back lamp

Flashes orange while the flash is charging to

indicate that image recording is disabled.

• You will not be able to take another flash

snapshot until the lamp stops flashing

orange, which indicates that charging is

complete.

< indicates the flash will fire.

39 Snapshot Tutorial

NOTE

• Take care so your fingers and the strap do not block the flash.

• The desired effect may not be obtained when the subject is too far away or too

close.

• Flash charging time (page 170) depends on operating conditions (battery

condition, ambient temperature, etc.).

• Shooting with flash turned off when lighting is dim results in a slow shutter speed,

which can cause image blur due to camera movement. Under such conditions,

secure the camera with a tripod, etc.

• With red eye reduction, the flash is fired automatically in accordance with

exposure. It does not fire in areas where lighting is bright.

• The presence of outdoor sunlight, fluorescent lighting, or some other light source

can cause abnormal image colors.

• Select ? (Flash Off) for the flash setting when shooting in areas where flash

photograph is prohibited.

Red-eye Reduction

Using the flash to shoot at night or in a dimly lit room can cause red spots inside the

eyes of people who are in the image. This is caused when the light from the flash

reflects off of the retina of the eye. When red-eye reduction is selected as the flash

mode, the camera fires a pre-flash to cause the irises in the eyes of any people in the

image to close, which reduces the chance of red eye. The camera also has an auto

red-eye correction feature that corrects for red-eye in recorded images.

Note the following important points when using red-eye reduction.

• Red-eye reduction does not work unless the people in the image are looking

directly at the camera (flash).

• Red-eye reduction may not work very well if the subjects are located far away from

the camera.

40 Snapshot Tutorial

You can select a focus mode setting.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the fourth Control Panel option from the top

(Focus).

3. Use [4] and [6] to select the setting you want and then press [SET].

*1 The focus range is the distance from the lens surface.

*2 The minimum changes along with the optical zoom setting.

Selecting a Focus Mode (Focus)

Settings Type of Shot Focus Mode Approximate Focus Range*

Snapshot SnapshotMovies Movies

Q Auto

Focus

General

recording Automatic

Fixed

focal

point

Approximately

20 cm to 9 (infinity)

(7.9" to 9)

(Wide Angle)

Fixed

distance

Macro Close ups Automatic

Approximately

8 cm to 50 cm

(3.1" to 19.7") (First

step zoom from the

Widest Angle setting)

Super

Macro Close ups Automatic Approximately 8 cm to

50 cm (3.1" to 19.7")

)

Infinity

Scenery and

other distant

subjects

Fixed Infinity

Manual

Focus

When you want

to focus

manually

Manual

Approximately 20 cm to 9

(infinity)*2 (7.9" to 9)

(Wide Angle)

41 Snapshot Tutorial

Super Macro

Super Macro fixes optical zoom at a position that allows you to shoot from the closest

distance to the subject. The result is closer and larger subject images.

NOTE

• Zoom is fixed while Super Macro is selected, so no zoom operation is performed

when you slide the zoom controller.

To focus with manual focus

1. On the monitor screen, compose the image so

the subject you want to focus on is within the

yellow boundary.

2. Watching the image on the monitor screen use

[4] and [6] to adjust focus.

• At this time the image that is within the boundary will

enlarge and fill the monitor screen, which aids in

focusing. If you do not perform any operation for two

seconds while the enlarged image is displayed, the

screen in step 1 will re-appear.

NOTE

• An Auto Macro feature detects how far the subject is from the lens and

automatically selects either Macro Focus or Auto Focus accordingly.

• Use of the flash together with Macro Focus can cause the light of the flash to

become blocked, which may result in unwanted lens shadows in your image.

• Whenever you perform an optical zoom operation while shooting with Auto Focus,

Macro Focus, or Manual Focus, a value will appear on the monitor screen to tell

you the focus range, as shown below.

Example: oo cm to 9

*oo is the actual focusing range value.

Yellow boundary

42 Snapshot Tutorial

Using Focus Lock

“Focus lock” is a technique you can use when you want to

compose an image in which the subject you want to focus

on is not within the focus frame in the center of the

screen.

• To use focus lock, select “Û Spot” for the Auto Focus

area (page 43).

1. Align the monitor screen’s focus frame with

the subject you want to focus on and then half-

press the shutter button.

2. Keeping the shutter button half-pressed (which

maintains the focus setting), move the camera

to compose the image.

3. When you are ready to shoot the image, press

the shutter button the rest of the way down.

NOTE

• Focus lock also locks exposure (AE).

Subject to be focused on

Focus frame

43 Snapshot Tutorial

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the fifth Control Panel option from the top

(AF Area).

3. Use [4] and [6] to select the setting you want and then press [SET].

4. Point the camera at the subject and half-press the shutter button. Wait

until the camera adjusts exposure and focus automatically.

Specifying the Auto Focus Area (AF Area)

Intelligent

The camera automatically determines the focus point on the

screen and focuses there (intelligent AF).

• Face detection (page 46) operates automatically.

Spot This mode takes readings of a small area in the center of the

image. This setting works well with focus lock (page 42).

Multi

When you half-press the shutter button while this setting selected,

the camera will select the optimum Auto Focus area from among

nine possible areas. The focus frame of the area where the

camera focuses will be displayed in green.

Tracking Half-pressing the shutter button focuses on the subject and causes

the focus frame to track the movement of the subject.

44 Snapshot Tutorial

5. Press the shutter button the rest of the way down.

IMPORTANT!

• “Ë Tracking” cannot be selected for the Auto Focus area while you are using

Auto Shutter (page 69).

• Selecting “Ë Tracking” can cause vibration and noise to occur due to lens

operation while tracking a subject. This does not indicate malfunction.

“Û Spot” or “Ë Tracking”

“È

Multi”

Focus frame

“Ò Intelligent”

Focus frame

45 Snapshot Tutorial

With the Self-timer, pressing the shutter button starts a timer. The shutter is released

and the image is shot after a fixed amount of time.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the sixth Control Panel option from the top

(Self-timer).

3. Use [4] and [6] to select the setting you want and then press [SET].

• The front lamp flashes while the Self-timer countdown is

in progress.

• You can interrupt an ongoing Self-timer countdown by

pressing [SET].

NOTE

• The Self-timer cannot be used together with the following features.

CS (4fps, 10fps), some BEST SHOT scenes

• The Triple Self-timer cannot be used together with the following features.

Auto Shutter, CS, Movie, Make-up Mode, Landscape Mode, some BEST SHOT

scenes

Using the Self-timer (Self-timer)

10sec

Self-timer 10-second Self-timer

2sec

Self-timer

2-second Self-timer

• When shooting under conditions that slow down the shutter

speed, you can use this setting to prevent image blur due to

camera movement.

Self-timer

(Triple

Self-timer)

Shoots three images: one image 10 seconds after the shutter

button is pressed, and the next two images as soon as the

camera is ready after shooting the previous image. How long it

takes for the camera to get ready to shoot depends on the

image size and quality settings, whether or not a memory card

is loaded in the camera, and the flash charge condition.

Self-timer Off Turns off the Self-timer.

„

‚

”

Front lamp

46 Snapshot Tutorial

When shooting people, the face detection feature detects the faces of up to ten

individuals and adjusts focus and brightness accordingly.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the third Control Panel option from the

bottom (Face Detection).

3. Use [4] and [6] to select “G Face Detection: On” and then press

[SET].

4. Point the camera at the subject(s).

The camera will detect human faces and display a

frame around each one.

5. Half-press the shutter button.

The camera will focus and the frames around the

faces it focuses on will turn green.

6. Press the shutter button the rest of the way

down.

IMPORTANT!

• The camera performs center focus if it cannot detect a face.

• The only focus mode available while face detection is enabled is Auto Focus (AF).

• Face detection may take a bit longer when you hold the camera sideways.

• Detection of the following types of faces is not supported.

– Face that is obstructed by hair, sunglasses, a hat, etc., or a face in dark shade

– A profile or a face that is at an angle

– A face that is very far away and small, or very close and large

– A face in an area that is very dark

– The face of a pet or some other non-human subject

• Face detection cannot be used in combination with any of the following features.

– Some BEST SHOT scenes

– Movie Recording

• The AF area setting (page 43) is ignored while face detection is enabled.

Using Face Detection (Face Detection)

Face Detection icon

47 Snapshot Tutorial

Your camera is equipped with various types of zoom: optical zoom, HD Zoom, Single

SR Zoom, and digital zoom. The maximum zoom factor depends on the image size

setting.

1. In the REC mode, slide the zoom controller to zoom.

2. Press the shutter button to shoot the image.

IMPORTANT!

• Digital zoom, HD zoom, and Single SR zoom are disabled while date stamping

(page 138) is turned on.

NOTE

• Use of a tripod is recommended to protect against image blur due to camera

movement when shooting with telephoto.

• Performing a zoom operation changes the lens aperture.

• Digital zoom only is available during movie recording. You can adjust the optical

zoom setting before you press [0] (Movie) to start movie recording.

Shooting with Zoom

Optical zoom Changes the lens focal distance.

HD Zoom Allows greater zoom capabilities by cutting out a portion of the

original image and enlarging it.

Single SR Zoom Applies super resolution technology to avoid deterioration of

resolution.

Digital zoom Digitally processes the center of the image to enlarge it.

w (Wide Angle) : Reduces the size of the subject and broadens the range.

z (Telephoto) : Enlarges the subject and narrows the range.

w z Wide Angle Telephoto

Zoom controller

48 Snapshot Tutorial

During a zoom operation, a zoom bar appears on the monitor screen to show the

current zoom setting.

.Zoom Icon

The appearance of the zoom icon on the monitor screen depends on the zoom factor.

Interpreting the Zoom Bar

Optical zoom Not displayed

HD Zoom Not displayed

Single SR Zoom ç

Digital zoom ê

Undeteriorated resolution range

(optical zoom, HD Zoom, Single SR Zoom)

1X 16X to 63.8X

Zoom pointer (Indicates current zoom.)

Point from which resolution deteriorates

• This point depends on the image size and on whether

Single SR Zoom is enabled or disabled.

Optical zoom limit point

• 4X optical zoom point

Deteriorated resolution range

(digital zoom)

49 Snapshot Tutorial

.Zoom Factor

The digital zoom factor depends on the image size (page 34) and on whether Single

SR Zoom is enabled or disabled.

Super resolution technology is used to analyze the image, and then interpolation is

performed to avoid loss of overall resolution that occurs when using zoom. For

information about the effective zoom factor ranges in which Single SR Zoom is

effective, see page 49.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the second Control Panel option from the

bottom (MENU) and then press [SET].

3. Use [4] and [6] to select the “Quality” tab.

4. Use [8] and [2] to select “Single SR Zoom” and then press [6].

5. Use [8] and [2] to select “On” and then press [SET].

NOTE

• Single SR Zoom is effective when you want to capture delicate textures.

• Single SR Zoom does not work during movie recording.

• The following functions are disabled when shooting with Single SR Zoom.

Continuous Shutter, Triple Self-timer, Make-up Mode, some BEST SHOT scenes

Image size

Maximum zoom factor for

undeteriorated resolution Total maximum

zoom factor

Single SR Zoom:

Off

Single SR Zoom:

14M 4X 6X 16X

3:2 4X 6X 16X

16:9 4X 6X 16X

10M 4.7X 7.1X 19X

6M 6.1X 9.2X 24.5X

3M 8.4X 12.6X 33.7X

VGA 27.0X 40.4X 63.8X

Zooming with Minimal Loss of Snapshot Resolution

(Single SR Zoom)

50 Recording Movie Images and Audio

Recording Movie Images and Audio

1. Configure the quality setting for the movie (page 37).

The length of the movie you can record will depend on the quality setting you

select.

2. In the REC mode, point the camera

at the subject and then press [0]

(Movie).

This will start recording and display Y

on the monitor screen.

Movie recording includes monaural

audio.

• Immediately after you press [0]

(Movie), the camera will focus

automatically on the subject in the

center of the monitor screen. After

this, focus is fixed while movie

recording is in progress.

3. Press [0] (Movie) again to stop recording.

Movie recording also will stop automatically if memory becomes full before you

press [0] (Movie).

• The maximum size allowed for a single movie file is 4GB. Movie recording

stops automatically when a file becomes 4GB.

Shooting with BEST SHOT

With BEST SHOT (page 55), you can select the sample scene that matches the type

of movie you are trying to shoot and the camera will change its setup accordingly, for

beautiful movies every time. Selecting the BEST SHOT scene named Night Scene,

for example, will configure the camera so night scenes appear clearer and brighter.

Minimizing the Effects of Camera Movement during Movie Recording

You can configure the camera to minimize the effects of camera movement during

movie recording (page 65). Note, however, that this does not prevent image blur due

to subject movement and it makes the field of view narrower.

To record a movie

Recording time

Remaining recording time

(page 168)

[0] (Movie)

52 Recording Movie Images and Audio

With this feature, the camera prerecords up to four seconds of whatever is happening

in front of the lens in a buffer that is continually updated. Pressing [0] (Movie) saves

the prerecorded action (buffer contents) followed by real-time recording. Real-time

recording continues until you stop it.

. To set up the camera to shoot with Prerecord Movie

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the bottom Control Panel option (BS) and

then press [SET] (page 33).

3. Use [8], [ ], [2 4], and [6] to select the “Prerecord (Movie)” scene and

then press [SET].

This causes ‰ to appear on the monitor screen.

. To shoot a Prerecord Movie

1. Point the camera at the subject and then half-press the shutter button

to focus with Auto Focus.

• Once proper focus is achieved, release the shutter button.

2. Press [0] (Movie).

This will save four seconds of action prerecorded in the buffer and start real-time

recording.

3. Press [0] (Movie) again to stop recording.

• To turn off Prerecord Movie, press [SET], use [8] and [2] to select the bottom

Control Panel option (BS), and then select R (Auto).

Using Prerecord Movie

[0] (Movie)

Movie

Recording start

4-second prerecorded part (from the buffer)

[0] (Movie)

Recording end

53 Recording Movie Images and Audio

1. While a movie is being recorded, press the shutter button.

Movie recording continues after the snapshot is recorded.

NOTE

• You can use [2] ( ) while shooting a movie to change the flash mode setting.

• Movie recording is interrupted for a few seconds at the point where a snapshot is

recorded.

• Shooting a snapshot during movie recording is not possible when shooting with

any of the following.

– Premium Auto

– Some BEST SHOT scenes

Voice Recording lets you record audio only, without a snapshot or movie.

• For information about Voice Recording capacities, see page 168.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the bottom Control Panel option (BS) and

then press [SET] (page 33).

3. Use [8], [2], [4], and [6] to select the “Voice Recording” scene and

then press [SET].

This causes ` to appear on the monitor screen.

4. Press the shutter button to start recording.

• The back lamp flashes green while recording is in

progress.

• Pressing [SET] during recording will insert a

marker into the recording. During playback, you

will be able to jump to the markers in the recording.

5. Press the shutter button again to stop audio

recording.

• To create another audio recording file, repeat

steps 4 and 5.

• To turn off Voice Recording, press [SET], use [8] and [2] to select the bottom

Control Panel option (BS), and then select R (Auto).

Shooting a Snapshot while Shooting a Movie

Recording Audio Only (Voice Recording)

Recording time

Remaining recording

time

54 Recording Movie Images and Audio

NOTE

• You can use [8] (DISP) during audio recording to toggle the monitor screen on

and off.

• When monitor screen contents are turned off, selecting the “Voice Recording”

scene will cause the monitor screen to turn off immediately (page 13).

About audio data

• Audio files can be played back on a computer with Windows Media Player or

QuickTime.

– Audio Data: WAVE/IMA-ADPCM (WAV extension)

1. In the PLAY mode, use [4] and [6] to display

the Voice Recording file you want to play.

` is displayed in place of an image for a Voice

Recording file.

2. Press [0] (Movie) to start playback.

• You can also start playback by selecting the second PLAY Panel item from the

top (Playback Start) and pressing [SET] (page 90).

Voice Recording Playback Controls

NOTE

• See page 30 for information about deleting a voice recording file.

To play back an audio recording

Fast forward/fast reverse [ ]4] [6

Play/pause [SET]

Jump to marker

While playback is paused, press [ 4 6] or [ ] to

jump to the next marker and then press [SET]

to resume playback.

Volume adjustment Press [2] and then press [8] [2]

Monitor screen on/off [8] (DISP)

Playback end [0] (Movie)

55 Using BEST SHOT

Using BEST SHOT

BEST SHOT provides you with a collection of sample “scenes” that show a variety of

different types of shooting conditions. When you need to change the setup of the

camera, simply find the scene that matches what you are trying to achieve, and the

camera sets up for it automatically. This helps to minimize the chance of ruined

images due to poor exposure and shutter speed settings.

1. In the REC mode, press [SET].

2. Use [8] and [2] to select the

bottom Control Panel option (BS)

and then press [SET] (page 33).

This will display a menu of BEST

SHOT scenes.

• The initial default selection is R

(Auto).

3. Use [8], [2], [4], and [6] to

move the boundary to the scene

you want to select.

• The scene menu has multiple pages. Use [8] and [2] to scroll between menu

pages.

• You can access information about the currently selected scene. See page 56

for details.

• To return to normal snapshot recording, select Scene 1 R (Auto).

What is BEST SHOT?

Some Sample Scenes

Portrait Scenery Night Scene Night Scene Portrait

To shoot an image with BEST SHOT

Currently selected scene

(with boundary)

Scene number

Scene name

[SET]

[ ]8] [2] [4] [6

56 Using BEST SHOT

4. Press [SET] to configure the camera with the settings for the currently

selected scene.

This returns to the REC mode.

• The settings of the scene you selected remain in effect until you select a

different scene.

• To select a different BEST SHOT scene, repeat the above procedure from

step 1.

5. Press the shutter button (if you are shooting a snapshot) or [0] (Movie)

(if you are shooting a movie).

NOTE

• The BEST SHOT YouTube scene sets up the camera for recording movies that are

optimized for uploading to YouTube. Movies recorded with the YouTube scene are

stored in a special folder to make them easy to locate for uploading (page 132).

. Using Scene Information Screen

To find out more about a scene, select it with the boundary

on the scene selection screen, and then slide the zoom

controller in either direction.

• To return to the scene menu, slide the zoom controller

again.

• To scroll between scenes, use [ 4 6] and [ ].

• To configure the camera with the settings for the currently

selected scene, press [SET].

57 Using BEST SHOT

. BEST SHOT Precautions

• Some BEST SHOT scenes cannot be used while recording a movie.

• Prerecord Movie scene and For YouTube scene cannot be used while shooting a

snapshot.

• The Voice Recording scene cannot be used while shooting a snapshot or recording

a movie.

• Some scenes like Night Scene and Fireworks results in a slow shutter speed

setting. Since a slow shutter speed increases the chance of digital noise in the

image, the camera automatically performs a digital noise reduction process when

either of these scenes is selected. This means that it will take a bit longer for the

image to be saved which is indicated by the back lamp flashing green. Do not

perform any key operation during that time. Also, it is a good idea to use a tripod to

avoid image blur due to camera movement when shooting at slow shutter speeds.

• Your camera includes a sample scene that optimizes settings for auction site

images. Depending on your camera model, the sample scene is named either “For

eBay” or “Auction”. Images you record using the auction site sample scene are

stored in a special folder so you can easily find them on your computer (page 132).

• Images recorded using the following BEST SHOT scenes (Art Shot) are saved as

3M (2048 x1536 pixels) size.

Oil Painting, Crayon, Water Color

• High Sensitivity

– The high sensitivity setting is disabled whenever the camera’s flash fires.

– High sensitivity may not produce the desired results in very dark conditions.

– When shooting with slow shutter speeds, use a tripod to protect against blurring

due to camera movement.

– Under certain lighting conditions, the camera will perform an automatic noise

filtering operation to reduce digital noise in the image. This operation causes the

camera to take longer than normal to save the image and be ready for the next

shot.

• BEST SHOT scene images were not shot using this camera.

• Images shot using a BEST SHOT scene may not produce the results you expected

due to shooting conditions and other factors.

• You can modify the camera settings that are made after you select a BEST SHOT

scene. Note, however, that the BEST SHOT settings revert to their defaults when

you select another BEST SHOT scene or turn off the camera.

58 Using BEST SHOT

You can save up to 999 camera setups as user BEST SHOT scenes for instant recall

whenever you need them.

1. On the BEST SHOT scene menu, select the scene named BEST SHOT

(Register User Scene).

2. Use [4] and [6] to select the snapshot or movie whose setup you want

to save.

3. Use [8] and [2] to select “Save”, and then press [SET].

Your BEST SHOT scene will be assigned the name “Recall User Scene”, along

with a scene number.

NOTE

• BEST SHOT snapshot scenes can be used for snapshots only and movie scenes

can be used for movies only.

• You can check the settings of the currently selected BEST SHOT scene by

displaying the camera’s setting menus and looking at its settings.

• User snapshot scenes are assigned numbers in the sequence: SU1, SU2, and so

on, while movies are assigned numbers in the sequence: MU1, MU2, and so on.

• The following are the settings that are saved for each user snapshot BEST SHOT

scene.

Face Detection, Focus, EV Shift, White Balance, Flash, ISO, Lighting, Make-up

Mode, Landscape Mode, Color Filter

• The following are the settings that are saved for each user movie BEST SHOT

scene.

Focus, EV Shift, White Balance, Color Filter

• User BEST SHOT scenes are stored in built-in memory (page 132) in the SCENE

folder (snapshots) or MSCENE folder (movies).

• Formatting the camera’s built-in memory (page 144) deletes all user BEST SHOT

scenes.

• Use the following procedure when you want to delete a user BEST SHOT scene.

1Display the information screen (page 56) of the user BEST SHOT scene you

want to delete.

2Press [ ] (Delete), select “Delete”, and then press [SET].

• The setup of an image recorded with Premium Auto cannot be saved as a user

BEST SHOT setup.

Creating Your Own BEST SHOT Setups

59 Using BEST SHOT

You can use this procedure to shoot a portrait and then print it out in the following

standard ID photo sizes: 30 x24mm, 40 x30mm, 45 x35mm, 50 x40mm, 55 x45mm.

1. On the BEST SHOT scene menu, select the “ID Photo” scene.

2. Press the shutter button to shoot a portrait of the person for whom you

want to create an ID photo.

3. Adjust the position of the face in the image.

4. Press [SET].

This saves the image in memory.

• The resulting image is always saved as a 5M (2560 x1920 pixels) size image,

regardless of the camera’s image size setting.

Printing an ID Photo

The print operation outputs multiple copies of the same image on the same sheet in

various standard ID photo sizes. Cut out the image(s) you need.

• Actual prints are slightly larger than the standard ID photo sizes to facilitate

trimming.

• When printing an ID photo, be sure to select “4" x6"” as the paper size (page 110).

• When printing an ID photo, be sure to set up your printer for “borderless print”. For

full details, see the user documentation that comes with your printer.

Shooting ID Photographs

[8] [2] [4] [6] : Moves the portrait up, down, left, and right.

Zoom controller : Zooms the portrait in and out.

Head line

Oval boundary

Chin line

60 Using BEST SHOT

1. On the BEST SHOT scene menu, select the “White board, etc.” scene.

2. Press the shutter button to shoot the image.

This image will appear on the monitor screen with a red

boundary around the area that is selected for keystone

correction. If there is a black boundary, it means that

the camera detected more than one area that could be

keystone corrected. Use [ 4 6] and [ ] to move the

boundary to the area you want to keystone correct.

• The message “Cannot correct image!” will appear on the monitor screen if

there are no areas that need to be keystone corrected, and the image will be

saved to memory as it is.

3. Use [8] and [2] to select “Correct” and then press [SET].

This will correct the image and save the resulting (corrected) image.

NOTE

• When composing an image like the ones shown above, make sure that the entire

outline of the object you are trying to shoot is enclosed within the monitor screen.

• Make sure the object is against a background that allows its outline to stand out.

• VGA size images are stored as VGA size images. All other size images are stored

as 2M (1600 x1200 pixels) images.

• Digital zoom is disabled while shooting with the “White board, etc.” scene.

However, you can use optical zoom (page 47).

Shooting Images of White board, etc.

A process called “keystone

correction” makes lines straight and

natural, even if rectangular subjects

are shot from an angle.

Before keystone

correction

After keystone

correction

61 Using BEST SHOT

With this feature, you can shoot your own self-portrait simply by pointing the camera

at your face.

BEST SHOT has two self-portrait scenes from which to choose.

1. On the BEST SHOT scene menu, select “Self-portrait (1 person)” or

“Self-portrait (2 people)”.

2. Press the shutter button all the way down, and point

the camera at yourself.

About three seconds after you press the shutter button, the

camera will go into Auto Shutter standby and start face

detection. The camera will go into Auto Shutter standby

and detect the faces of any people in the image.

When the camera is able to detect the number of required

individuals, it will release the shutter automatically when it determines there is no

image blur.

• The camera will emit a shutter sound and the front lamp will flash twice when

the shutter is released.

• To cancel Auto Shutter standby, press [SET].

IMPORTANT!

• If the camera remains in Auto Shutter standby without releasing the shutter, you

can record an image by pressing the shutter button all the way down again.

• Shooting with the self-portrait feature may produce a blurred image when shooting

in areas where lighting is dim, which results in a very slow shutter speed setting.

• The Auto Power Off (page 141) trigger time is fixed at five minutes while the

camera is in Auto Shutter standby. Sleep (page 140) is disabled while Auto Shutter

is being used.

Recording a Self-portrait

• Self-portrait (1 person): Shoots when the face of at least one person, including

you, is detected.

• Self-portrait (2 people) : Shoots when the faces of at least two people, including

you, are detected.

62 Using BEST SHOT

Multi-motion Image can be used to isolate a moving subject

within a series of multiple images and places them against

a stationary background. Make sure that the camera is not

moving or shaking when shooting with Multi-motion Image.

1. On the BEST SHOT scene menu, select the

“Multi-motion Image” scene.

2. Press the shutter button to start shooting.

Continuous Shutter shooting will stop after some time, and the resulting

composite image will appear on the monitor screen.

• Keep the camera still until all of the continuous shutter images are recorded.

• When using this feature, image size is fixed at 3M (2048 x1536 pixels).

Isolating Moving Subjects (Multi-motion Image)

64 Advanced Settings

NOTE

• [ ] (Delete) provides a helpful way to navigate around tabs and menus.

– Pressing [ ] (Delete) while a tab is selected will display the viewfinder screen.

– Pressing [ ] (Delete) while menu item or setting is selected will “back step” in

the following sequence: Settings * * Menu items Tab.

IMPORTANT!

• Switching from “Auto” to “Premium Auto” (page 25) will make some menu items

unavailable.

. REC Menu Operations in This Manual

REC menu operations are represented in this manual as shown below. The following

operation is the same one described under “Example REC Menu Screen Operation”

on page 63.

Procedure

[r] (REC)

[SET]

Quality Tab

Lighting

Use [4] and [6] to select the

“Quality” tab.

Use [8] and [2] to select “Lighting” and

then press [6].

Press [SET].Press

[r] (REC).

Use [8] and [2] to select the second Control Panel option from the

bottom (MENU) and then press [SET].

Specyfikacje produktu

Marka:	Casio
Kategoria:	kamera
Model:	Exilim EX-Z800
Kolor produktu:	Niebieski
Wysokość produktu:	52.3 mm
Szerokość produktu:	91 mm
Głębokość produktu:	19.5 mm
Waga produktu:	124 g
Typ HD:	HD
Zasięg obiektywu:	3.2 - 8
Technologia baterii:	Litowo-jonowa (Li-Ion)
Typ ekranu:	LCD
Rozdzielczość wyświetlacza aparatu:	230400 px
Długość przekątnej ekranu:	2.7 "
Obsługiwane typy kart pamięci:	SD, SDHC
Pojemność pamięci wewnętrznej:	14.5 MB
Ekran dotykowy:	Nie
Nagrywanie wideo:	Tak
Obsługiwane formaty plików wideo:	AVI, M-JPEG
Rodzaj baterii:	NP-80
Liczba baterii:	1
Standardowe rozwiązania komunikacyjne:	USB 2.0
Nagrywanie głosu:	Tak
Długość ogniskowa:	4.9 - 19.6 mm
Pictbridge:	Nie
Wersja USB:	2.0
Cyfrowe zbliżenie:	6 x
Wbudowany mikrofon:	Tak
Typ aparatu/kamery:	Kompaktowy aparat fotograficzny
Megapiksele:	14.1 MP
Rozmiar przetwornika obrazu:	1/2.3 "
Typ przetwornika obrazu:	CCD
Maksymalna rozdzielczość obrazu:	4320 x 3240 px
Stabilizator obrazu:	Tak
Obsługiwane proporcje obrazu:	3:2, 16:9
Battery life (CIPA standard):	280 zdj.
Maksymalna rozdzielczość filmu:	1280 x 720 px
Wielkość ramki ruchomej jpeg:	20 fps
Zoom optyczny:	4 x
Struktura soczewki:	6/5
Tryby autofokusa:	Multi Point Auto Focus, Single Auto Focus, Spot Auto Focus
Śledzenie twarzy:	Tak
Balans bieli:	Auto, Daylight, Manual, Tungsten
Tryby scenerii:	Krajobraz
Efekty fotograficzne:	Black&White, Vivid
Czułość ISO:	80,100,200,400,800,1600,3200,Auto
Pomiar światła:	Centralnie ważony
Typ migawki aparatu:	electronic, mechanical
Tryby lampy błyskowej:	Auto, Flash off, Manual, Red-eye reduction
Zasięg lampy (szerokość):	0.25 - 4.2 m
Zasięg lampy (tele):	0.4 - 2.3 m
Standardowy zakres ogniskowania:	0.2 - ∞ m
Wbudowany flesz:	Tak
Szybkość migawki:	1/2 - 1/2000 s
Cyfrowy SLR:	Nie
Możliwość nagrywania sekwencji wideo:	Tak
Odpowiednik soczewki optycznej 35 mm:	27 - 108 mm
Zakres ogniskowania Macro (tele):	0.08 - 0.5 m
Zakres ogniskowania Macro (szeroki):	0.08 - 0.5 m
Połączony zoom:	63.8 x
Zakres ostrości obiektywu:	3.2 - 5.9