Instrukcja obsługi Canor AI 2.10

Canor odbiornik AI 2.10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canor AI 2.10 (6 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
CANOR , spol. s r.o., Družstevná 39, 080 06 Prešov, Slovakia
Tel./Fax: + 421 51 7710 396,
canor-audio@canor-audio.com / www.canor-audio.com
CANOR AI 2.10 integrated hybrid amplier user manual
Dear music lover,
thank you for purchasing our CANOR AI 2.10 integrated hybrid amplier.
To preserve and maintain the best characteristics of your amplier, we recommend you
carefully read the following lines.
Safety instructions
Please read before putting the device into operation.
1. Read the instructions - all safety information and instructions should be read before using
the amplier.
2. Keep the user manual - safety and user instructions manual should be stored for possible later use.
3. Follow the instructions - all safety and user instructions should be followed.
4. Water and moisture AI 2.10 amplier should not be placed near water, for example near bathtubs, –
swimming pool, kitchen sink, etc..
5. Accessories - do not use accessories not recommended by the manufacturer.
6. Placement - do not place a device on an unstable pad. The device may fall, which can cause serious
injuries to children or adults, as well as damage to the device. Use only pads or racks recommended by the
manufacturer or pads sold to dealers with this device.
Any placement of the device should be in accordance with the manufacturer's instructions and only accessories
recommended by the manufacturer should be used.
7. Ventilation the unit should be placed the way to ensure proper air ow. That means it is not –
allowed to place the amplier on a sofa, nor on an upholstered furniture. The amplier may not be covered over
when in operation, it would otherwise prevent proper air ow around the vent holes of the amplier.
8. Heat amplier has to be placed so as to avoid the heating eect from heat sources, for example –
radiators or stoves, or other heat-producing equipment. The distance from the back wall of the unit may not be
less than 20 cm, and 20 cm above the area of AI 2.10 may not be any barrier. Alongside the unit should be
ensured 20 cm minimal distance from other objects.
9. Power source -the device must be connected only to a mains supply for what it is designed for.
10. Power cord - it is necessary to pay particular attention to a power cord, it must be positioned in
order to avoid setting foot on it, and ensure it is protected against mechanical damage.
11. if you do not use the AI 2.10 amplier for a longer period of time you should disconnect the –
power cord from the mains supply, or at least turn o the main power switch located on the back panel.
12. Objects containing liquid - do not place these objects (vases, owerpots), so that they can fall down
on the amplier, eventually, prevent the liquid from being leaked out on the amplier.
14. Damages requiring service - equipment should be repaired only by qualied service in the event
that: a) power cord is damaged
b) device dropped into the water or was poured
c) device was exposed to rain
d) device works incorrectly
e) device fell down on the ground or is otherwise mechanically damaged
14. Repairs - all repairs must be entrusted to qualied service
15. General warning - use the device only in accordance with this user guide
The manufacturer declines any liability should these safety measures not be observed. To help you avoid
an electric shock, do not expose the amplier to rain or moisture!
Delivery content
1. shipping packaging
2. CANOR AI 2.10 integrated amplier
3. Power cord
4. Remote control (containing AAA batteries -2 pcs)
5. CANOR AI 2.10 user manual
Caution!
The Waste Electrical and Electronic Equipment Directive -Regulation of the European Union 2002/96/EC
governing the issue of separate waste collection.
This device may not be disposed of in unsorted municipal waste. Devolve the appliance upon a collection center
for recycling and disposal of electrical and electronic equipment waste. Correct disposal of waste does not cause
negative impacts on the environment and human health. You will thus contribute to protection of the
environment.

Specyfikacje produktu

Marka: Canor
Kategoria: odbiornik
Model: AI 2.10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canor AI 2.10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Canor

Canor

Canor AI 2.10 Instrukcja

2 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024