Instrukcja obsługi Canon Vixia HF R100

Canon kamera Vixia HF R100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Vixia HF R100 (5 stron) w kategorii kamera. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
PIXMA MG3200
Setup Guide
© CANON INC. 2012
series
Setup Guide
This guide provides information for setting up a network connection for the printer.
Network Connection
Wireless Connection
Preparation for Connection
Printer Setup
Connection Using WPS
Troubleshooting
Network Connection
Wireless Connection
a Preparation for Connection
Before Starting Wireless Connection Setup
1. Make sure that the printer is turned on.
If the power is on, the LED (Light Emitting Diode) is lit as shown in the illustration below.
Notes on Wireless Connection
Make sure that the computer is connected to the access point (A) (or wireless network router) you want to connect your
printer to.
The confi guration, router functions, setup procedures and security settings of the network device vary depending on your
system environment. For details, refer to the manual of your network device or contact its manufacturer.
Check if your device supports IEEE802.11n, 802.11g or 802.11b.
If your device is set to the "IEEE802.11 n only" mode, WEP or TKIP cannot be used as a security protocol. Change the
security protocol for your device to something other than WEP and TKIP or change the setting to something other than
"IEEE802.11 n only."
For offi ce use, consult your network administrator.
Take added care when connecting to a network that is not protected with security measures, as there is a risk of disclosing
data such as your personal information to a third party.
An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless connection without an
access point, is not supported. Be sure to prepare an access point.
b Printer Setup
1. Press and hold the Maintenance button (A) on the printer (for about 5 seconds).
2. Make sure that the LED ashes as shown in the illustration below.

Specyfikacje produktu

Marka: Canon
Kategoria: kamera
Model: Vixia HF R100
Kolor produktu: Grey, Silver
Wysokość produktu: 60 mm
Szerokość produktu: 68 mm
Głębokość produktu: 123 mm
Waga produktu: 380 g
Gniazdko wyjścia DC: Tak
Zasięg obiektywu: 1.8 - 3.6
Typ ekranu: LCD
Długość przekątnej ekranu: 2.7 "
Obsługiwane typy kart pamięci: SD, SDHC
Automatyczne ustawienie ostrości: Tak
Maksymalna liczba klatek na sekundę: 30 fps
Obsługiwane formaty plików wideo: H.264
Liczba portów USB 2.0: 1
Pobór mocy: 2.8 W
Rodzaj baterii: BP-808
Mikrofon: Tak
Standardowe rozwiązania komunikacyjne: USB 2.0
Długość ogniskowa: 3 - 60 mm
Cyfrowe zbliżenie: 400 x
Wyjście komponentu wideo: 1
Zespolony sygnał wizji: 1
Wbudowany mikrofon: Tak
Sport: Tak
Typ przetwornika obrazu: CMOS
Stabilizator obrazu: Tak
Suma megapikseli: 2.39 MP
Zoom optyczny: 20 x
Wbudowany flesz: Tak
Min. Oświetlenie: 0.4 lx
System formatu sygnału analogowego: NTSC
Ostrość: TTL
Wielkość czujnika CCD: 1/5.5 "
Odpowiednik soczewki optycznej 35 mm: 40 - 800 mm
Tryb foto: Tak
Prędkość przesłony (wideo): 1/2000 s
Prędkość przesłony (fotografia): 1/500 s

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canon Vixia HF R100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą