Instrukcja obsługi Canon Ixus 700

Canon kamera Ixus 700

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Ixus 700 (196 stron) w kategorii kamera. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/196
Please read the section (p. 6).Read This First
Please also read the Canon Digital Camera Software Starter Guide Disk
and the Direct Print User Guide.
Camera User Guide
ENGLISH
Flowchart and Reference Guides
Use of genuine Canon accessories is recommended.
This product is designed to achieve excellent performance when used
with genuine Canon accessories. Canon shall not be liable for any
damage to this product and/or accidents such as fire, etc., caused by
the malfunction of non-genuine Canon accessories (e.g., a leakage
and/or explosion of a battery pack). Please note that this warranty
does not apply to repairs arising out of the malfunction of non-
genuine Canon accessories, although you may request such repairs
on a chargeable basis.
Shooting with the Camera
This Guide
This Guide
Canon Digital Camera
Software Starter Guide Disk
Canon Digital Camera
Software Starter Guide Disk
Direct Print User Guide
Printer User Guide
Installing the Software
Connecting the Camera to a Computer
Downloading Images to a Computer
Using the Printer and Printing
This Guide
1
Camera Body Temperature
If your camera is used for prolonged periods, the camera body may become
warm. Please be aware of this and take care when operating the camera for
an extended period.
About the LCD Monitor
The LCD monitor is produced with extremely high-precision manufacturing
techniques. More than 99.99% of the pixels operate to specification. Less
than 0.01% of the pixels may occasionally misfire or appear as red or black
dots. This has no effect on the recorded image and does not constitute a
malfunction.
Video Format
Please set the camera’s video signal format to the one used in your region
before using it with a TV monitor (p. 156).
Charging the Date/Time Battery
• The camera has a built-in rechargeable lithium-ion battery that maintains
the date, time and other camera settings. This battery recharges when the
main battery pack is inserted into the camera. When you first purchase the
camera, place a charged battery pack in it for at least 4 hours to charge
the date/time battery. It will charge even when the camera power is turned
off.
• If the Date/Time menu appears when the camera power is turned on, it
means that the date/time battery charge is depleted. Recharge it as
described above.
2
About This Guide
Conventions Used in the Text
: This mark denotes issues that may affect the camera’s operation.
: This mark denotes additional topics that complement the basic
operating procedures.
Icons appearing beside or below titles indicate the modes in which the
procedure can be used. In the example below, the Self-timer mode can
be used in the following shooting modes.
• Auto • Manual • Special Scene
• Movie • Digital Macro • My Colors
• Stitch Assist
Using the Self-timer
In this guide an SD memory card (Secure Digital, a copyright protection
system) is referred to as an SD card.
3
Table of Contents
Please Read......................................................................................... 6
Safety Precautions .............................................................................. 7
Preventing Malfunctions ................................................................... 12
Components Guide........................................................................... 13
Charging the Battery Pack ................................................................. 19
Installing the Battery Pack................................................................. 22
Installing the SD Card ....................................................................... 24
Formatting SD Cards..................................................................... 26
Setting the Date and Time ................................................................. 29
Setting the Language ........................................................................ 32
Turning the Power On ....................................................................... 34
Using the LCD Monitor...................................................................... 36
LCD Monitor Brightness.................................................................... 38
Information Displayed on the LCD Monitor ....................................... 39
Using the Viewfinder ......................................................................... 43
Using the Zoom................................................................................. 44
Pressing the Shutter Button .............................................................. 45
Selecting Menus and Settings ........................................................... 47
Menu Settings and Factory Defaults.................................................. 52
Resetting Settings to Their Default Values ........................................ 58
Shooting in Auto Mode .............................................................. 59
Reviewing an Image Right After Shooting......................................... 60
Changing Resolution/Compression Settings ..................................... 62
Using the Flash ............................................................................. 64
Shooting in a Special Scene Mode .......................................... 66
Shooting in Manual Mode ....................................................... 69
Shooting Close-Ups/ Infinity Shots ..................................... 70
Magnified Close-Up Shooting (Digital Macro)................................... 72
Read This First
Components Guide
Preparing the Camera
Basic Functions
Shooting
Items marked with are lists or charts that summarize camera functions
or procedures.
4
Using the Digital Zoom ...................................................................... 74
Continuous Shooting ................................................................... 75
Postcard Date Imprint Mode.............................................................. 76
Using the Self-timer ..................................................................... 78
Shooting a Movie........................................................................ 81
Shooting Panoramic Images (Stitch Assist) ...................................... 86
Switching between Focusing Modes.................................................. 89
Shooting Hard-to-Focus Subjects (Focus Lock, AF Lock).................. 90
Locking the Exposure Setting (AE Lock)............................................ 92
Locking the Flash Exposure Setting (FE Lock)................................... 93
Switching between Metering Modes ........................................... 94
Adjusting the Exposure Compensation .............................................. 95
Shooting in Long Shutter Mode......................................................... 96
Adjusting the Tone (White Balance)................................................... 98
Changing the Photo Effect ............................................................... 101
Shooting in a My Colors Mode ........................................................ 102
Adjusting the ISO Speed.................................................................. 109
Setting the Auto Rotate Function ..................................................... 110
Resetting the File Number ............................................................... 111
Displaying Images Individually ........................................................ 113
Magnifying Images .................................................................... 114
Viewing Images in Sets of Nine (Index Playback) .................... 115
Jumping to Images............................................................... 117
Viewing Movies ............................................................................... 118
Editing Movies ................................................................................. 121
Rotating Images in the Display ........................................................ 123
Attaching Sound Memos to Images................................................. 124
Automated Playback (Slide Shows) ................................................. 126
Protecting Images ........................................................................... 130
Erasing Single Images............................................................... 131
Erasing All Images ........................................................................... 132
About Printing ................................................................................. 134
Setting the DPOF Print Settings....................................................... 136
Playback
Erasing
Print Settings
5
Selecting Images for Transferring ................................................... 142
Connecting the Camera to a Computer............................................ 146
Computer System Requirements ................................................ 146
Downloading Images by Direct Transfer ......................................... 152
Connecting the Camera to the Computer to Download Images Without
Installing Software ................................................................... 154
Downloading from an SD Card ........................................................ 154
Viewing Images on a TV set ............................................................ 155
Changing My Camera Settings ........................................................ 157
Registering My Camera Settings ..................................................... 159
List of Messages ............................................................................. 162
Troubleshooting .............................................................................. 164
Using an AC Adapter Kit (Sold Separately)...................................... 169
Using an Externally Mounted Flash (Sold Separately) ..................... 170
Camera Care and Maintenance ........................................................ 172
Specifications .................................................................................. 173
Photo Tips and Information............................................................. 181
Index ............................................................................................... 183
Functions Available in Each Shooting Mode.................................... 192
Image Transmission Settings (DPOF Transfer Order)
Connecting the Camera to a Computer
Viewing Images on a TV set
Customizing the Camera (My Camera Settings)
List of Messages
Troubleshooting
Appendix
6
Read This First
Please Read
Test Shots
Before you try to photograph important subjects, we highly recommend that
you shoot several trial images to confirm that the camera is operating and
being operated correctly.
Please note that Canon Inc., its subsidiaries and affiliates, and its
distributors are not liable for any consequential damages arising from any
malfunction of a camera or accessory, including SD memory cards, that
results in the failure of an image to be recorded or to be recorded in a way
that is machine readable.
Warning Against Copyright Infringement
Please note that Canon digital cameras are intended for personal use and
should never be used in a manner that infringes upon or contravenes
international or domestic copyright laws and regulations. Please be advised
that in certain cases the copying of images from performances, exhibitions,
or commercial properties by means of a camera or other device may
contravene copyright or other legal rights even if the image was shot for
personal use.
Warranty Limitations
For information on your camera's warranty, please refer to the Canon
European Warranty System (EWS) Booklet supplied with your camera.
For Canon Customer Support contacts, please see rear of this booklet or
the European Warranty System (EWS) Booklet.
7
Safety Precautions
• Before using the camera, please ensure that you read and understand the
safety precautions described below. Always ensure that the camera is
operated correctly.
• The safety precautions noted on the following pages are intended to
instruct you in the safe and correct operation of the camera and its
accessories to prevent injuries or damage to yourself, other persons and
equipment.
• In the next few pages, the term equipment refers primarily to the camera
and its power supply accessories, such as the battery charger and
separately sold compact power adapter. See the System Map for power
supply accessory details.
Warnings
• Do not aim the camera directly into the sun or at other intense light
sources that could damage your eyesight.
• Do not trigger the flash in close proximity to human or animal eyes.
Exposure to the intense light produced by the flash may damage eyesight.
In particular, remain at least one meter (39 inches) away from infants
when using the flash.
•Store this equipment out of the reach of children and infants. Accidental
damage to the camera or battery pack by a child could result in serious
injury. In addition, placement of the strap around the child’s neck could
result in asphyxiation.
•Do not attempt to disassemble or alter any part of the equipment that is
not expressly described in this guide. Disassembly or alteration may
result in high-voltage electrical shock. Internal inspections, alterations and
repairs should be conducted by qualified service personnel authorized by
your camera distributor or a Canon Customer Support Help Desk.
Storing SD cards
Store the SD memory card out of the reach of children and infants.
It may be swallowed accidentally. If this occurs, consult a doctor
immediately.
8
•To avoid the risk of high-voltage electrical shock, do not touch the flash
portion of the camera if it has been damaged. Similarly, never touch
internal portions of the equipment that become exposed as a result of
damage. There is a risk of high-voltage electrical shock. Please take the
first opportunity to consult your camera distributor or the closest Canon
Customer Support Help Desk.
•Stop operating the equipment immediately if it emits smoke or noxious
fumes. Failure to do so may result in fire or electrical shock. Immediately
turn the camera power off, remove the battery pack or unplug the battery
charger from the power outlet. Confirm that smoke or fume emissions
have ceased. Please consult your camera distributor or the closest Canon
Customer Support Help Desk.
•Stop operating the equipment if it is dropped or the casing is damaged.
Failure to do so may result in fire or mediately turn the electrical shock. Im
camera power off, remove the battery pack or unplug the power cable
from the power outlet. Please consult your camera distributor or the
closest Canon Customer Support Help Desk.
•Do not allow the equipment to come into contact with, or become
immersed in, water or other liquids. Do not allow liquids to enter the
interior. The camera has not been waterproofed. If the exterior comes into
contact with liquids or salt air, wipe it dry with a soft, absorbent cloth. If
water or other foreign substances enter the interior, immediately turn the
camera power off and remove the camera battery pack or unplug the
power cord from the power outlet. Continued use of the equipment may
result in fire or electrical shock. Please consult your camera distributor or
the closest Canon Customer Support Help Desk.
•Do not use substances containing alcohol, benzene, thinners or other
flammable substances to clean or maintain the equipment. The use of
these substances may lead to fire.
•Remove the power cord on a regular periodic basis and wipe away the
dust and dirt that collects on the plug, the exterior of the power outlet
and the surrounding area. In dusty, humid or greasy environments, the
dust that collects around the plug over long periods of time may become
saturated with humidity and short-circuit, leading to fire.
9
•Do not cut, damage, alter or place heavy items on the power cord.
Any of these actions may cause an electrical short circuit, which may lead
to fire or electrical shock.
•Do not handle the power cord if your hands are wet. Handling it with wet
hands may lead to electrical shock. When unplugging the cable, ensure
that you hold the solid portion of the plug. Pulling on the flexible portion of
the cable may damage or exposure the wire and insulation, creating the
potential for fires or electrical shocks.
•Use only recommended power accessories. Use of power sources not
expressly recommended for this equipment may lead to overheating,
distortion of the equipment, fire, electrical shock or other hazards.
•Do not place the battery pack near a heat source or expose it to direct
flame or heat. Neither should you immerse it in water. Such exposure
may damage the battery pack and lead to the leakage of corrosive liquids,
fire, electrical shock, explosion or serious injury.
•Do not attempt to disassemble, alter or apply heat to the battery pack.
There is serious risk of injury due to an explosion. Immediately flush with
water any area of the body - including the eyes and mouth, or clothing -
that comes into contact with the inner contents of a battery. If the eyes or
mouth contact these substances, immediately flush with water and seek
medical assistance.
•Avoid dropping or subjecting the battery pack to severe impacts that
could damage the casings. It could lead to leakage and injury.
•Do not short-circuit the battery terminals with metallic objects, such as
key holders. It could lead to overheating, burns and other injuries. Use
the supplied terminal cover to transport or store the battery pack.
•Before you discard a battery, cover the terminals with tape or other
insulators to prevent direct contact with other objects. Contact with the
metallic components of other materials in waste containers may lead to
fire or explosions. Discard the battery pack in specialized waste facilities if
available in your area.
•Use only recommended battery pack and accessories. Use of battery
pack not expressly recommended for this equipment may cause
explosions or leaks, resulting in fire, injury and damage to the
surroundings.
11
Cautions
•Avoid using, placing or storing the equipment in places subject to
strong sunlight or high temperatures, such as the dashboard or trunk
(boot) of a car. Exposure to intense sunlight and heat may cause the
batteries to leak, overheat or explode, resulting in fire, burns or other
injuries. High temperatures may also cause deformation of the casing.
Ensure that there is good ventilation when using the battery charger to
charge the battery pack.
•Do not store the equipment in humid or dusty areas. Storage in such
areas could lead to fire, electrical shock or other damage.
• Be careful not to bang the camera or subject it to strong impacts or
shocks that could lead to injury or damage the equipment when
wearing or holding it by the strap.
•Be careful not to cover the flash with your fingers or clothing when
shooting. The flash may be damaged and emit smoke or noise. In
addition, do not touch the surface of the flash after taking several pictures
in rapid succession. Either action could result in burns.
•Do not operate the flash with dirt, dust or other items stuck to its lens.
The resulting heat build-up could damage the flash.
•Ensure that the battery charger is plugged into a power outlet of the
specified rating, not over the specified rating. The plug of the battery
charger varies according to region.
• Do not use the battery charger or compact power adapter if the plug or
cable is damaged, or if the plug is not fully inserted into the power
outlet.
• Do not allow metal objects (such as pins or keys) or dirt to contact the
charger terminals or plug.
•If your camera is used for prolonged periods, the camera body may
become warm. Please take care when operating the camera for extended
periods as your hands may experience a burning sensation.
12
Preventing Malfunctions
Avoid Strong Magnetic Fields
Never place the camera in close proximity to electric motors or other
equipment generating strong electromagnetic fields. Exposure to strong
magnetic fields may cause malfunctions or corrupt image data.
Avoid Condensation Related Problems
Moving the equipment rapidly between hot and cold temperatures may
cause condensation (water droplets) to form on its external and internal
surfaces. You can avoid this by placing the equipment in an airtight,
resealable plastic bag and letting it adjust to temperature changes slowly
before removing it from the bag.
If Condensation Forms Inside the Camera
Stop using the camera immediately if you detect condensation. Continued
use may damage the equipment. Remove the SD card and battery pack or
compact power adapter from the camera and wait until the moisture
evaporates completely before resuming use.
Extended Storage
When not using the camera for extended periods of time, remove the
battery pack from the camera or battery charger and store the equipment in
a safe place. Storing the camera for extended periods with a battery pack
installed will run down the battery pack. However the date, time and other
camera settings may reset to default settings if the battery pack has been
removed for more than three weeks.
13
Components Guide
Components Guide
Front View
* When carrying the camera by the strap, be careful not to swing the camera
or catch it on other items.
The interface cable and AV cable cannot be connected simultaneously.
AF-assist Beam (p. 46)
Red-Eye Reduction Lamp (p. 65)
Self-timer Lamp (p. 78)
Flash (p. 64)
Lens
Microphone (p. 124)
Wrist Strap Mount
Viewfinder Window (p. 43)
DIGITAL Terminal (p. 147)
A/V OUT (Audio/Video output) Terminal (p. 155)
Terminal Cover Attaching the Wrist Strap*
Speaker
14
Back View
LCD Monitor (p. 36)
Tripod Socket
SD Card Slot/
Battery Cover (pp. 22, 24)
Battery Compartment
(SD card/battery
compartment)
Viewfinder Window (p. 43)
DC Coupler Terminal Cover (p. 169)
16
Mode Dial
Use the mode dial to select a shooting or playback
function.
To Shoot Still Images (Shooting Mode)
To Play Back Images (Playback Mode)
When a printer is properly connected, the , or icon
appears on the LCD monitor.
Auto Shoots with settings selected by the camera
(p. 59).
Manual You select the exposure compensation, white
balance or photo effect settings (p. 69).
Special
Scene
Effective for shooting in 9 varying conditions
(p. 66).
Movie Shoots movies with sound (p. 81).
Playback
• Play back or delete images from the SD card
(pp. 113, 131)
• The lens retracts approximately 1 minute
after the mode dial is turned from a shooting
mode to playback mode.
• When a printer is connected, images can be
printed (see the Direct Print User Guide).
• When a camera is connected, recorded
images can be downloaded to and viewed
with a computer (p. 146).
17
Components Guide
Indicators
The indicators light or blink when the power button or shutter button is pressed.
Upper Indicator
Green: Ready to shoot
Blinking Green:
Recording to SD card / Reading SD card / Erasing from SD
card/Transmitting data (during a computer connection)
Orange: Ready to shoot (flash on)
Blinking Orange: Ready to shoot (camera shake warning)
Lower Indicator
Yellow: Macro mode / Infinity mode/ AF lock
Blinking Yellow: Focusing difficulty (single beep).
Although you can still press the shutter button when the
indicator blinks yellow, you are recommended to shoot
using the focus lock or AF lock (p. 90).
Holding the Camera
Images become blurred if the camera moves when the shutter button is
pressed. Hold the camera as shown below to avoid camera movement
when shooting.
• Make sure that your hair or fingers do not obstruct the lens, flash, self-
timer lamp, microphone or speaker.
• Fix the camera onto a tripod when shooting infinity shots or in dark
places.
Hold the camera firmly with both hands
and let your elbows rest at your sides.
Place your finger on the shutter button
as you hold the camera.
18
The following operations are accessible through one easy press of the
(Print/Share) button.
• Printing: See the Direct Print User Guide (supplied with the camera)
• Downloading images: See p.145 of this guide and the Canon Digital
Camera Software Starter Guide Disk (supplied with the camera)
The indicator blinks or lights during a printer or computer connection.
Blue: Ready to print/Ready to transfer images
Blinking blue: Printing/Transferring
The following cables are used to connect the camera to a computer or
printer.
Computer (p. 145)
Interface Cable IFC-400PCU (supplied with the camera)
Direct Print Compatible Printers (Sold Separately)
•Compact Photo Printer (SELPHY CP series)/Card Photo Printer
Interface Cable IFC-400PCU (supplied with the camera) or the
Direct
Interface Cable DIF-100 (supplied with the printer).
• Bubble Jet Printers (PIXMA series/SELPHY DS series)
-PictBridge Compliant Printers:
Interface Cable IFC-400PCU (supplied with the camera)
-Bubble Jet Direct Compatible Printers:
Please refer to your Bubble Jet printer user guide.
•PictBridge Compliant Non-Canon Printers
Interface Cable IFC-400PCU (supplied with the camera)
Please refer to the System Map or the Direct Print User Guide supplied
with the camera for direct print compatible printer information
.
19
Preparing the Camera
Preparing the Camera
Charging the Battery Pack
Use the following procedures to charge the battery pack the first time you
use the camera or when the “Change the battery pack” message displays.
To protect the battery pack and prolong its life, do not charge it for
longer than 24 hours continuously.
1Insert the battery pack into the
battery charger.
Align the on the battery pack and
battery charger and insert it correctly.
2Battery charger model names and types
vary by region.
(For CB-2LU)
Plug the battery charger into a
power outlet.
(For CB-2LUE)
Attach the power cord to the battery
charger and plug it into a power
outlet.
• The charge indicator will light red while
the battery pack is charging. It will change
to green when the charge is complete.
• After charging, unplug the battery charger
and immediately remove the battery pack.
Symbol
Charge Indicator
20
• Since this is a lithium-ion battery pack, you need not completely
discharge it before recharging. It can be recharged at any point.
However, since the maximum number of charge cycles is
approximately 300 times (battery life based on Canon’s testing
standards), you are recommended to charge the battery pack after
having discharged it completely to prolong battery life.
• It takes approximately 95 minutes to fully charge the battery pack
from a fully discharged state (based on Canon’s testing standards).
Charging it within a temperature range of 5° to 40 °C (41° to 104 °F)
is recommended.
• Charge times may vary according to the ambient temperature and
the battery pack’s charge state.
• You may hear a noise during charging. This is not a malfunction.
• See Battery Capacity (Battery Pack NB-3L (Fully charged)) (p. 177).
Battery Pack Handling Precautions
zKeep the battery pack terminals ( ) clean at all times. Dirty
terminals may cause poor contact between the battery pack and camera.
Polish the terminals with a soft cotton swab before charging or using the
battery pack.
zDo not rapidly overturn or wave the battery charger around when it
contains the battery pack. The battery pack could fly out.
zAt low temperatures, battery pack performance may be reduced and the
low battery icon may appear earlier than usual. Under these conditions,
resuscitate the battery pack by warming it in a pocket immediately before
use. However, ensure that there are no metallic items in the pocket that
could cause a short circuit, such as a key holder, etc.
zDo not place anything, such as tablecloths, carpets, bedding or cushions,
on top of the battery charger while it is charging. Heat will build up and
could result in a fire.
zDo not charge batteries other than Battery Pack NB-3L in this charger.
zThe battery pack continues to discharge a minimal portion of its power
while installed in the camera, even with the power off, or in the charger.
This will shorten battery life.
22
Installing the Battery Pack
Install Battery Pack NB-3L (supplied).
Please recharge the battery pack (p. 19)
before you use it for the first
time.
1Slide the SD card slot/battery cover
in the direction of the arrows.
2Press the battery lock while
inserting the battery pack all the
way in until the lock clicks.
Align the on the battery pack and
battery chamber and insert it correctly.
To remove the battery pack, press the
battery lock in the direction of the arrow and
hold it while pulling the battery pack out.
3Slide the SD card slot/battery cover
closed.
Battery Lock
Symbol
23
Preparing the Camera
• Please watch the loading slot area carefully as you insert and
remove the battery pack.
• Do not turn off the power or open the SD card slot/battery cover
while the indicator blinks green. The camera is writing, reading,
erasing or transmitting an image to or from the SD card.
• Remove the battery pack when the camera is not in use. Please
note, however, that the date, time and other camera settings may be
lost if the battery pack has been removed for more than three weeks.
Please use an AC Adapter Kit ACK900 (sold separately) for extended
use of the camera (p. 169).
Battery Pack Charge
The following icons and messages will display when the battery pack charge
is low.
See Battery Capacity (Battery Pack NB-3L (Fully charged)) (p. 177).
Battery pack charge is low. Recharge it as soon as possible
before it is required for an extended period.
When the LCD monitor is off, this icon will display when you
press any button other than the power or (Print/Share)
button.
Change the
battery pack
Battery charge is insufficient to operate the camera. Replace
the battery pack immediately.
24
Installing the SD Card
Write-Protect Tab
The SD card has a write-protect tab. Sliding the tab downward prevents
recording of data and protects existing data (e.g. images). When recording
to, erasing from or formatting the SD card, slide the tab upward.
Turn the camera power off and insert the SD card with the following
procedures.
1Slide the SD card slot/battery cover
in the direction of the arrows.
2Insert the SD card.
• Push it according to the diagram on the
SD card slot/battery cover until it clicks
into place.
• Do not touch or allow metal objects to
contact the terminals on the back of the
SD card.
Writing/Erasing Possible Writing/Erasing Impossible
Write-Protect Tab
Ensure that the SD card is correctly oriented before inserting it in the
camera. It may damage the camera if inserted backward by mistake.
Back
25
Preparing the Camera
To Remove the SD card
Push in the SD card until you hear it click, then release it.
• Please watch the loading slot area carefully as you insert and
remove the SD card.
• Since the camera is writing, reading, erasing or transmitting data to
or from the SD card when the indicator blinks green, never perform
the following actions during this time. It could corrupt the image
data.
- Subject the camera body to vibration or shocks.
- Turn the camera’s power off, or open the SD card slot/battery
cover.
• Please note that SD cards formatted with other manufacturers’
cameras or a computer, or formatted or edited with application
programs, may slow down writing to the SD card or may not operate
correctly in the camera.
• You are recommended to use SD cards that have been formatted in
your camera (p. 26). The card supplied with the camera may be
used without further formatting.
See SD Cards and Estimated Capacities (p. 178).
3Slide the SD card slot/battery cover
closed.
27
Preparing the Camera
• Low Level Format
You should select the Low Level Format option if you suspect the
read/write speed of an SD card has dropped or if you wish to
completely erase its data. A low level format may require 2 to 3
minutes with some SD cards.
• When the camera is malfunctioning, a corrupted SD card might be
the cause. Reformatting the SD card may solve the problem.
• When a non-Canon brand SD card is malfunctioning, reformatting it
may solve the problem.
• SD cards formatted in other cameras, computers, or peripheral
devices may not operate correctly in this camera. When that
happens, reformat the SD card with this camera. If formatting in the
camera does not work properly, turn the camera off and re-insert the
SD card. Then turn the camera back on and format again.
5Use the button to select [OK] and
press the FUNC./SET button.
• To perform a low level format, use the
button to select [Low Level Format] and
the or button to add a check mark.
• To exit instead of formatting, select
[Cancel].
• If [Low Level Format] is selected, you can
stop formatting partway by pressing the
FUNC./SET button. You can still use the
SD card without problem even if
formatting was halted partway.
• The capacity of the SD card displayed after
formatting will be less than the rated
capacity of the SD card. This is not a
malfunction of the SD card or camera.
28
SD Card Handling Precautions
zSD cards are high-precision electronic devices. Do not bend them, apply
force to them, or subject them to shocks or vibration.
zDo not attempt to disassemble or alter the SD card.
zDo not allow dirt, water or foreign objects to contact the terminals on the
back of the card. Do not touch the terminals with your hands or metal
objects.
zDo not peel away the original label on the SD card or cover it with another
label or sticker.
zWhen writing on the SD card, use a soft point pen (e.g. felt-tip pen). Using
a sharp point pen (e.g. ball-point pen) or pencil may damage the SD card or
corrupt the recorded data.
zSince some or all of the data recorded on the SD card may be corrupted or
erased by electrical noise, static electricity or card malfunction, making a
backup copy of important data is recommended.
zMoving an SD card rapidly between temperature extremes will cause
condensation to form in the card and lead to a malfunction. To avoid
condensation, place the SD card in a sealed plastic bag before moving it
into a different temperature zone and allow it to adjust slowly to the new
temperature.
zIf condensation forms on the SD card, store it at room temperature until the
water droplets have evaporated naturally.
zDo not use or store SD cards in the following locations.
- Locations subject to dust or sand
- Locations subject to high humidity and high temperatures
Precaution for Multi Media Cards
This camera is designed to perform optimally when used with genuine
Canon-brand SD cards. You may use multi media cards with this
camera. However, Canon makes no warranties concerning the use of
multi media cards.
29
Preparing the Camera
Setting the Date and Time
The Date/Time menu will appear the first time the camera power is turned
on or whenever the built-in rechargeable lithium-ion date/time battery
charge is low. Start from Step 5 to set the date and time.
1Press the power button until the
power lamp lights green.
2Press the MENU button.
The (Rec.) or (Play) menu is
displayed.
3Use the button to select the
(Set up) menu.
4Use the or button to select
[Date/Time] and press the FUNC./
SET button.
Power Lamp
30
• Please note that the date and time settings may be lost if the camera
battery has been removed for more than three weeks. Reset them
when this occurs.
• For embedding the date on the image data, refer to page 77.
• To set the camera so that the date and time will not appear on
the image when it is being shot but only when it is printed, see
Setting the Print Style (p. 140), the Direct Printer User Guide or
the Canon Digital Camera Software Starter Guide Disk supplied
with the camera.
Charging the Date/Time Battery
- The camera has a built-in rechargeable lithium-ion battery for
saving settings such as the date and time. This battery is
recharged by the battery pack while it is in the camera. Right after
purchasing the camera, leave a charged battery pack in the
camera, or plug in AC Adapter Kit ACK900 (sold separately), for
about 4 hours to charge the date/time battery. It will charge even
when the camera power is turned off.
- If the Date/Time menu appears when the camera power is turned
on, the date/time battery charge is low. Use the above method to
recharge it.
5Set the date and time.
• Use the or button to select a field
(year, month, day, hour, minute and date
format).
• Use the or button to change its
value.
• The date can be set up to the year 2037.
6Press the FUNC./SET button.
The setting is complete.
7Press the MENU button.
The display will return to the shooting or
playback screen.
31
Preparing the Camera
Using the Clock
You can display the current date and time for
a 5-second* interval using the following
methods. This is convenient for confirming
the shooting date and time.
* Default setting
• Holding the FUNC./SET Button While Pressing the Power Button
-The start-up image will not display at startup, also the start-up sound
will not play.
-The Date/Time menu will display if the time has not been set.
-The Display Off function will not work while the clock display is on.
• Pressing and Holding the FUNC./SET Button in Shooting Mode
The clock display will differ according to the camera orientation.
-Camera held horizontally: only the time displays
-Camera held vertically: both the time and date display
While the clock display is on, you can
change the display color by pressing the
or button or by firmly holding and
gently shaking the camera as shown in
the illustration. Feel free to change to
your preferred color.
The clock display will cease when the display interval is over or when you
operate any one of the FUNC./SET, MENU or Shutter buttons or the mode
dial.
• The clock cannot be displayed when menus are displayed with the MENU
button.
• The clock’s display interval can be changed in the (Set up) menu
(p. 55).
32
Setting the Language
Use this feature to select the language for the LCD monitor display.
1Press the power button until the
power lamp lights green.
2Press the MENU button.
The (Rec.) or (Play) menu is
displayed.
3Use the button to select the
(Set up) menu.
4Use the or button to select
[Language] and press the FUNC./
SET button.
Power Lamp
33
Preparing the Camera
You can display the Language menu directly by holding down the
FUNC./SET button and pressing the MENU button while in single
image playback or index playback mode.
5Use the , , or button to
select a language and press the
FUNC./SET button.
6Press the MENU button.
The display will return to the shooting or
playback screen.
34
Basic Functions
Turning the Power On
To Turn the Power Off
Press the power button again.
• If the “Card locked!” message appears right after the power is
turned on, the SD card cannot record (p. 24).
• The Date/Time menu will appear the first time the camera power is
turned on or whenever the built-in rechargeable lithium-ion battery
charge is low. Reset the date and time when this occurs (p. 29).
• If the power saving function activates, press the power button to
restore power.
• You will hear a start-up sound and see the start-up image when the
power is turned on. To change the start-up sound and image, see
pp. 54, 57, 157.
• The start-up image does not display when the camera is connected
to a TV via the A/V OUT terminal.
Turning On the Power without the Start-Up Sound
Hold the MENU button while pressing the power button. This will set the
[Mute] setting to [On] and silence the operation sound and the shutter
sound. This is convenient when you wish to shoot silently.
Press the power button until the
indicator lights green.
The lens extends when the mode dial is set
to , , or .
Power Lamp
35
Basic Functions
Power Saving Function
This camera is equipped with a power saving function.
When this function is turned on and it activates, restore power by pressing
the power button.
Shooting Mode: Powers down approximately 3 minutes after the last
control is accessed on the camera.
The LCD monitor automatically turns off 1 minute* after
the last control is accessed even if [Auto Power Down] is
set to [Off]. Press any button other than the power
button
or change the camera orientation to turn the LCD monitor
back on.
* This time can be changed (p. 55).
Playback Mode: Powers down approximately 5 minutes after the last
control is accessed on the camera.
Connected to a Printer (sold separately):
Powers down approximately 5 minutes after the last
control is accessed on the camera.
• The power saving function will not activate during a slide show or while
the camera is connected to a computer.
• The power saving function can be turned off (p. 55).
36
Using the LCD Monitor
The LCD monitor can be used to compose images while shooting, adjust
menu settings and play back recorded images. Icons showing the camera’s
status and setting contents appear on the LCD monitor.
The image in the LCD monitor will darken in strong sunlight or bright
light. This does not constitute a malfunction.
Shooting Mode ( , , , ) (p. 40)
• The LCD monitor setting (On or Off) is saved by the camera when
the power is turned off so that the same setting is automatically
available when the power is turned on again. However, the setting
may be lost when the power has been turned off after the “Change
the battery pack” message has displayed, while the LCD monitor
was on in Shooting mode.
• The LCD monitor does not shut off in the , , or mode.
Press the DISP. button.
The display mode changes as follows with
each press.
Standard (No Information)
Detailed (Information View)
Off
37
Basic Functions
Playback Mode ( ) (p. 41)
When the mode dial is set to , the LCD monitor will turn on.
In index playback mode (p. 115), the detailed display is not available.
Press the DISP. button.
The display mode changes as follows with
each press.
Standard
Detailed
No Information
39
Basic Functions
Information Displayed on the LCD Monitor
When shooting or playing back images, the shooting information, review
information or replay information appears on the LCD monitor.
When setting the flash, continuous mode, self-timer, macro mode, infinity
mode, or the metering method, the shooting information displays on the
LCD monitor for approximately 6 seconds even if the LCD monitor is set to
Standard (No Information) or Off. It may not display under some
circumstances, depending on the selected settings.
A slow shutter speed has likely been selected because of insufficient
lighting if the upper indicator beside the viewfinder blinks orange after
the metering preparations are complete and the camera shake icon
appears in the LCD monitor. Set the flash to or , or affix the
camera to a tripod to shoot.
• Right after a shot is taken, the image and its information appear in
the LCD monitor for 2 seconds (or the selected number of seconds if
the review time was changed or until the shutter button is pressed
again if the Hold option is selected) even if you release the shutter
button (p. 61). If you continue to press the shutter button right after
shooting an image, or press the FUNC./SET button while the image
is displayed, the image will continue to display.
• While a recorded image is displayed on the LCD monitor, you can
check the exposure with the graph (see Histogram Function p. 42)
that shows the distribution of the brightness data. If the exposure
requires adjustment, set the exposure compensation and reshoot.
Press the DISP. button if the histogram and other information are not
shown.
Shooting Information (Shooting Mode)
40
* Appears even if the LCD monitor is set to Standard (No Information).
Zoom powers indicate the combined optical and digital amount of zoom.
These figures appear when the digital zoom is activated.
Exposure Compensation (p. 95)
Long Shutter Mode (p. 96)
White Balance (p. 98)
ISO Speed (p. 109)
Photo Effect (p. 101)
Compression (p. 62)
Resolution (pp. 62,
63)
Low Battery (p. 23)
Metering Mode (p. 94)
Shooting Method (pp. 75, 78)
Flash (p. 64)
Shooting Mode (pp. 59, 69,
72, 102, 66, 81)
Movie Recording (p. 81)
Camera Shake Warning (p. 39)
Spot AE Point Frame ( Mode)
AF Frame (p. 89)
• Stills: Recordable Shots
• Movies (Sec.):
-Recordable Time
-Recorded Time
Zoom Magnification* (p. 44)
*
(Red)*
*
*
Auto Rotate (p. 110)
*
*
Macro/Infinity (p. 70)
AE Lock (p. 92)
FE Lock (p. 93)
AF Lock (p. 90)
*
*
*
Frame Rate (Movie) (pp. 63, 85)
* *
My Colors
(p. 102)
*
42
The following information may also be displayed with some images.
Please note that image information recorded by this camera may not
display correctly on other cameras and image information recorded
by other cameras may not display correctly on this camera.
A sound file in a format other than the WAVE format is attached or the
file format is not recognized.
JPEG image not conforming to Design rule for Camera File System
Standards
RAW image
Unrecognized data type
Histogram Function
The histogram is a graph that allows you to judge the brightness of the
shot image. The greater the bias toward the left in the graph, the darker
the image. The greater the bias toward the right, the brighter the image.
If the image is too dark, adjust the exposure compensation to a positive
value. Similarly, adjust the exposure compensation to a negative value
if the image is too bright (p. 95).
Sample Histograms
Balanced ImageDark Image Bright Image
43
Basic Functions
Using the Viewfinder
The viewfinder can be used to conserve power by turning the LCD monitor
off (p. 36) while shooting.
Image Seen in Viewfinder vs. Recorded Image
Usually the recorded image contains more of the scene than is seen in
the viewfinder. Confirm the actual image size with the LCD monitor.
The image recorded may differ from what is seen in the viewfinder due
to the distance between the viewfinder and lens (especially with
close-ups). If you use the viewfinder to take close-up shots, portions of
the close-up subject may not appear in the recorded image. Use the
LCD monitor when taking close-up shots (p. 70).
Shows the center of the image
Viewfinder
About the Autofocus Function
This camera employs AiAF (artificial intelligence autofocus) technology
which uses a broad metering field to calculate the focal distance with
high precision. It delivers a crisp focus even when the photographic
subject is slightly off-center.
The AiAF function can be turned off so that the autofocus is metered from
a fixed AF frame at the center of the field (p. 89).
44
Using the Zoom
The zoom can be adjusted from 37 mm to 111 mm in 35mm film equivalent
terms.
Telephoto/Wide Angle
Digital Zoom
When the LCD monitor is on, you can shoot with a combined optical and
digital zoom up to approximately 12x (p. 74).
Images become coarser the more they are digitally zoomed.
1Press the zoom lever toward or
.
• Press the zoom lever toward to zoom
in (telephoto).
• Press the zoom lever toward to zoom
out (wide angle).
45
Basic Functions
Pressing the Shutter Button
The shutter button features a two-stage action.
1. Pressing Halfway
Automatically sets such settings as the exposure and focus.
Press the shutter button halfway.
zBeep
• Focused: 2 beeps
• Focusing difficulty: 1 beep
zIndicator Status
Upper Indicator
• Green: Metering complete
• Orange: Flash will fire
• Blinking Orange: Camera shake warning/
Insufficient exposure
Lower Indicator
• Yellow: Macro mode/Infinity
mode/AF lock (p. 70,
90)
• Blinking Yellow: Focusing difficulty
*
* Use the focus lock or AF lock to shoot when the
indicator blinks yellow (p. 90).
zAF Frame Status (LCD Monitor On)
AiAF On (p. 89)
• Green Frame: Metering complete
(focused AF frame)
• No Frame: Focusing difficulty
AiAF Off (p. 89) (Center AF Frame)
• Green Frame: Metering complete
• Yellow Frame: Focusing difficulty
Indicators
47
Basic Functions
Selecting Menus and Settings
Menus are used to adjust shooting and playback settings, as well as other
camera settings like the Date/Time and sounds. Menus are displayed by
pressing the FUNC./SET or MENU button according to the circumstances.
Use the following procedures to select settings.
Some menu options may not be selectable in certain shooting modes
(p. 192).
Selecting Menu Settings with the FUNC./SET Button
(Shooting Mode only)
1
Turn the mode dial to , ,
or .
2Press the FUNC./SET button.
3Select the shooting mode with the
or button (except in Auto
mode).
4Use the or button to select an
item.
Please see the FUNC. Menu topic on the
next page for the selectable menu items.
5Use the or button to select an
option.
• Some menu items allow you to make
further settings by pressing the MENU
button.
• You can shoot right after performing these
steps. The menu displays again after the
shot, allowing you to change the settings
easily.
6Press the FUNC./SET button.
48
FUNC. Menu
( )
Manual Mode (p. 69)
( )
Photo Effect (p. 101)
( )
Special Scene Mode
(p. 66)
( )
My Colors (p. 102)
( )
Movie Mode (p. 81)
( )
Compression
(p. 62)
( )
Exposure Compensation (p. 95)
( )
Frame Rate (p. 85)
( ) Long Shutter Mode (p. 96)
( )
Resolution
(p. 62)
( )
White Balance (p. 98)
( )
Resolution (Movie)
(p. 63)
( )
ISO Speed
(p. 109)
( ) Items in parentheses show default settings.
49
Basic Functions
Selecting Menu Settings with the MENU Button
1
Turn the mode dial to , ,
, or .
2Press the MENU button.
In Shooting mode, the (Rec.) menu
appears.
In Playback mode, the (Play) menu
appears.
3Use the or button to select
the Rec./Play, Set up, or My
Camera menu.
• Select the menu with the / , or
icon in the upper left corner of the
LCD monitor selected.
• The zoom lever lets you select the menu
even if the / , or icon is
not selected.
4Use the or button to select an
item.
See Menu Settings and Factory Defaults (p. 52).
5Use the or button to select an
option.
Menu items followed by an ellipsis (...) can
only be selected after pressing the FUNC./
SET button to display the next menu. Press
the FUNC./SET button again to confirm the
setting.
50
6Press the MENU button.
• The menu will close.
• In Shooting mode, the menu can be
closed by pressing the shutter button
halfway.
52
Menu Settings and Factory Defaults
This chart shows the options and default settings for each menu.
* Default setting
Rec. Menu
Menu Item Options
Reference
Page
AiAF
Sets whether or not the camera automatically
selects the AF frame or a fixed center AF frame.
• On*
• Off
p. 89
Self-timer
Sets the duration of the self-timer delay.
• 10 seconds*
• 2 seconds
• Custom Timer
Delay: 0-10*, 15, 20, 30 sec.
Shots: 1-10 (3*)
p. 78
AF-assist Beam
Sets the AF-assist Beam to on or off.
• On*
• Off
p. 46
Digital Zoom
Sets the digital zoom to on or off.
It can be set to [On] or [Off] for a movie in
standard mode, but the default setting is [On].
• On
• Off*
p. 74
Review
Sets the duration images display on the LCD
monitor after the shutter button releases.
• Off
• 2* to 10 seconds
• Hold
p. 60
Date Stamp
Sets the date stamp for postcard prints with
embedded date stamps.
• Off*
• Date
• Date & Time
p. 77
Save Original
Sets whether or not to save the original image
(normal image) when shooting in a My Colors mode.
• On
• Off*
p. 104
53
Basic Functions
Long Shutter
Sets the shutter speed to slow settings.
• On
• Off*
p. 96
Stitch Assist
Images are shot in overlapping series to create
single panoramic images.
• Left to right*
• Right to left
p. 86
Play Menu
Menu Item Options
Reference
Page
Protect Protects images from accidental erasure. p. 130
Rotate
Rotates images clockwise 90° or 270° in the
display.
p. 123
Sound Memo Adds sound memos to images. p. 124
Erase all Deletes all images from an SD card
(except for protected images). p. 132
Slide Show Plays images automatically one after the other. p. 126
Print Order
Selects images and the number of print copies
for output to a direct print compatible printer
or photo developing service.
p. 136
Transfer Order Specifies settings for images before
downloading to a computer. p. 142
Menu Item Options
Reference
Page
56
Language
Sets the language used in menus and
messages on the LCD monitor.
• English*
• Deutsch (German) • Русский (Russian)
• Français (French) • Português (Portuguese)
• Nederlands (Dutch) • Ελληνικά (Greek)
• Dansk (Danish) • Polski (Polish)
• Suomi (Finnish) • Čeština (Czech)
• Italiano (Italian) • Magyar (Hungarian)
• Norsk (Norwegian) • Türkçe (Turkish)
• Svenska (Swedish) •
• Español (Spanish) (Traditional Chinese)
• • (Korean)
(Simplified Chinese) •
(Japanese)
p. 32
Video System
Sets the video output signal standard.
• NTSC
• PAL
p. 156
Menu Item Options
Reference
Page
57
Basic Functions
You can select the start-up image and sound, operation sound, self-timer
sound and shutter sound used on this camera.
These are called the My Camera settings. You can also customize the
and options for each item with images recorded on the SD card and
newly recorded sounds or by using the supplied software.
See the Canon Digital Camera Software Starter Guide Disk for details.
• How the [Mute] option in the (Set up) Menu and Sounds in the
(My Camera) Menu Interact
To turn off each sound, such as the start-up sound, shutter sound,
operation sound and self-timer sound, [Mute] must first be set to [On] in
the (Set up) menu. When [Mute] is set to [On], each sound option will
not play even if they are set individually to [On]. The warning sound,
however, will play even when [Mute] is set to [On].
My Camera Menu
Menu Item Available Settings
Reference
Page
Theme Selects a common theme for each
My Camera settings item.
p. 157
Start-up Image Sets the image displayed when the
camera power is turned on.
Start-up Sound Sets the sound played when the camera
power is turned on.
Operation Sound Sets the sound played when any button
other than the shutter button is pressed.
Selftimer Sound Sets the sound played 2 seconds before
the shutter releases in self-timer mode.
Shutter Sound
Sets the sound played when the shutter
button is pressed. There is no shutter
sound for movies.
My Camera Menu Contents
• (Off) • *
• •
59
Shooting
Shooting
Shooting in Auto Mode
In this mode, all you have to do is press the shutter button and let the
camera do everything else.
• See Functions Available in Each Shooting Mode (p. 192).
• With the Review function, you can change the length of time images
show on the LCD monitor after shooting, or set it so they do not show
at all (p. 60).
1
Turn the mode dial to (Auto).
2Aim the camera at the subject.
3Use the zoom lever to achieve the
desired composition (relative size
of subject in viewfinder) (p. 44).
4
Press the shutter button halfway (p. 45).
• Two beeps will play when the camera has
finished metering, and the upper indicator
beside the viewfinder will light green or
orange. If the LCD monitor is on, the AF
frame will appear green.
• If the subject is difficult to focus on, the lower
indicator beside the viewfinder will blink yellow
and the beep will
play
one time.
5
Press the shutter button fully (p. 46).
• You will hear the sound of the shutter
when the shutter activates.
• The picture appears for two seconds on
the LCD monitor.
60
Reviewing an Image Right After Shooting
Right after a shot is taken, the image appears in the LCD monitor for 2
seconds. In addition, the images will keep on displaying regardless of the
review duration setting if one of the following operations is performed.
• Keeping the shutter button pressed after a shot.
• Pressing the FUNC./SET button while the image is displayed on the LCD
monitor (except in mode).
Press the shutter button halfway to stop displaying it so that you can shoot the
next frame.
• You can do the following while the image is displayed (except in
mode).
- Display the image’s information (p. 39).
- Erase the image (p. 131).
- Display the magnified image (p. 114).
(when the image is displayed with the FUNC./SET button or the Hold option
has been selected)
61
Shooting
Changing the Review Duration
The default review time is 2 seconds. You can set the review time for an
image to [Off], a range between 2 and 10 seconds, or [Hold].
1In the (Rec.) menu, select
[Review].
See Selecting Menus and Settings (p. 47).
2
Use
the or button
to select the
review setting and press the MENU
button.
• With the [Off] option, the image will not
automatically display.
• In the [2 sec.] to [10 sec.] range, the
image will continue to display for the
specified time even if the shutter button is
released.
• With the Hold option, the image displays
until the shutter button is next pressed.
• You can shoot the next image while an
image is still displayed.
62
Changing Resolution/Compression Settings
You can change the compression (excluding movies) and resolution
settings to suit the purpose of the image you are about to shoot.
Resolution Purpose
(Large) 3072 x 2304 pixels High
• Print up to A3-size prints 297 mm
x 420 mm (11.7 x 16.5 in.)
(Medium 1) 2592 x 1944 pixels
• Print larger than A4-size prints*
210 x 297 mm (8.3 x 11.7 in.)
•
Print larger than Letter-size prints*
216 x 279 mm (8.5 x 11 in.)
(Medium 2)
2048 x 1536
pixels
• Print up to A4-size prints* 210
x 297 mm (8.3 x 11.7 in.)
• Print up to Letter-size prints*
216 x 279 mm (8.5 x 11 in.)
(Medium 3)
1600 x 1200
pixels
• Print postcard-size prints 148 x
100 mm (6 x 4 in.)
• Print L-size prints 119 x 89 mm
(4.7 x 3.5 in.)
(Small) 640 x 480 pixels Low
• Send images as e-mail
attachments
• Shoot more images
(Postcard Date Imprint Mode)
1600 x 1200 pixels
•
The resolution is set to
(1600 x 1200)
and the compression to
(Fine).
• See Postcard Date Imprint Mode (p. 76).
* Paper sizes vary according to region.
Compression Purpose
Superfine High
Quality • Shoot higher quality images
Fine • Shoot normal quality images
Normal Normal
• Shoot more images
63
Shooting
Movies can be shot with the following resolutions.
• See Image Data Sizes (Estimated) (p. 179).
• See SD Cards and Estimated Capacities (p. 178).
Resolution
Frame Rate
frames/sec. frames/sec. frames/sec.
Standard
My Colors
640 x 480 pixels
– 
320 x 240 pixels
– 
Fast Frame Rate
320 x 240 pixels
– –
Compact
160 x 120 pixels
– –
1In the FUNC. menu, select * or
*.
See Selecting Menus and Settings (p. 47).
* The current setting is displayed.
2Use the or button to select an
option.
• For movies, see page p.81.
• You can shoot right after selecting an
option. The menu displays again after the
shot, allowing you to change the settings
easily.
3Press the FUNC./SET button.
The display will return to the shooting
screen.
65
Shooting
• When you use the flash at higher ISO speeds, the chances of white
streaks appearing in the image increase the closer you approach to
the subject.
• Since a slow shutter speed is selected in dark places when the flash
is set to Off or Slow Synchro, take care to avoid camera shake. You
are recommended to shoot with the camera fixed to a tripod or other
device if the camera shake warning icon appears.
• The flash can be fired when the indicator lights a steady orange after
pressing the shutter button halfway.
• The flash may take up to approximately 10 seconds to charge. The
recharging time will vary with such factors as the shooting
conditions and battery charge. Shots cannot be taken while the flash
is charging.
• The flash fires twice. The main flash follows a pre-flash. The
exposure reading obtained from the subject with the pre-flash is
used to set the optimal flash intensity for the main flash, which is
used to capture the image.
• When using the flash for standard photography, be sure to shoot
from a distance of at least 50 cm (1.6 ft.) away from your subject.
Red-Eye Reduction
• Light reflecting back from eyes can make them appear red when the
flash is used in dark areas. Under these conditions, use the red-eye
reduction mode. For this mode to be effective, the subject must be
looking right at the red-eye reduction lamp. Try asking them to look
directly at the lamp. Even better results can be obtained by
increasing the lighting in indoor settings or approaching closer to
the subject.
• The shutter will not activate for approximately 1 second after the red-
eye reduction lamp fires in order to improve the effect. If you want a
more immediate shutter response, set the flash to , or .
1Press the button to switch
between flash modes.
The selected flash mode appears on the LCD
monitor.
67
Shooting
Beach Fireworks Underwater
Indoor Kids&Pets Night Snapshot
1
Turn the mode dial to
SCN (Special
Scene Mode).
2Choose a shooting mode from the
FUNC. menu.
• See Selecting Menus and Settings (p. 47).
• You can shoot right after selecting an option.
The menu displays again after the shot,
allowing you to change the settings easily.
3Press the FUNC./SET button.
•
The display will return to the shooting
screen and the icon of the selected shooting
mode will appear on the LCD monitor.
• Except for the mode, the shooting
procedures are the same as for Shooting
in Auto Mode
(p. 59)
.
• To shoot in mode, refer to the
Waterproof Case User Guide that
accompanies Waterproof Case WP-DC70
(sold separately).
68
• The shutter speed is slow in (fireworks) mode. Always use a
tripod to avoid camera shake.
• In , , and modes (depending on the scene being shot),
the ISO speed may increase and cause noise in the image.
• In mode, shoot with the subject 1 m (3.3 ft.) – infinity from the end
of the lens.
• See Functions Available in Each Shooting Mode (p. 192).
• Results may vary depending on the subject.
• In mode, you are recommended to use the LCD monitor to shoot.
• To shoot underwater, install the camera in Waterproof Case
WP-DC70 (sold separately).
• You are recommended to place the camera in Waterproof Case
WP-DC70 (sold separately) for the (Snow) and (Beach)
modes.
70
Shooting Close-Ups/ Infinity Shots
To cancel the macro/infinity mode
Press the /
button to remove or
from the display.
Macro
Use this mode to record subjects in the range of 5 to 50
cm (2.0 in. to 1.6 ft.) from the end of the lens at the
maximum wide angle setting and in the range of 30 to 50
cm (1.0 to 1.6 ft.) at the maximum telephoto setting.
Infinity
Use this mode to record landscapes and distant subjects.
It can also be used for compositions combining both
near and distant subjects.
  – U
– –  U
 –  –
 –  –
Setting available UCan be selected for the first image only
1Press the / button to select
the macro/infinity mode.
The selected macro/infinity mode appears
on the LCD monitor.
78
Using the Self-timer
With this function, images are shot 10 or 2 seconds after the shutter button
is pressed. This is useful when you want to take a memorable photo with
everyone including yourself in the picture. In addition, you can set the delay
time and number of shots (Custom Timer).
To Cancel the Self-Timer
Press the button to display .
Changing the Self-timer Countdown Time
1Press the button to display or
.
• When the shutter button is pressed fully,
the self-timer will activate and the self-
timer lamp will blink.
• When the self-timer is set to ( ),
the shutter activates 10 (2) seconds after
the shutter button is pressed fully.
• With the (Custom Timer) option, the
specified number of shots are taken after
the specified delay when the shutter
button is pressed fully.
1In the (Rec.) menu, select
[Self-timer].
See Selecting Menus and Settings (p. 47).

Specyfikacje produktu

Marka: Canon
Kategoria: kamera
Model: Ixus 700

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Canon Ixus 700, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera Canon

Canon

Canon WP-DC42 Instrukcja

28 Lutego 2025
Canon

Canon WFT-E9 Instrukcja

13 Stycznia 2025
Canon

Canon PowerShot PX Instrukcja

14 Grudnia 2024
Canon

Canon Power Zoom Adapter PZ-E2 Instrukcja

5 Października 2024
Canon

Canon EOS R10 Instrukcja

3 Października 2024
Canon

Canon WP-DC41 Instrukcja

29 Września 2024
Canon

Canon WP-DC51 Instrukcja

29 Września 2024
Canon

Canon WP-DC44 Instrukcja

29 Września 2024
Canon

Canon WP-DC36 Instrukcja

29 Września 2024
Canon

Canon WP-DC32 Instrukcja

28 Września 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Polaroid

Polaroid Now Generation 3 Instrukcja

9 Kwietnia 2025
Reolink

Reolink NVC-D12M Instrukcja

9 Kwietnia 2025
Panasonic

Panasonic Lumix DC-TZ91 Instrukcja

3 Kwietnia 2025
Vemer

Vemer EasyEye.NOW Instrukcja

2 Kwietnia 2025
Maginon

Maginon WK-7 HD Instrukcja

1 Kwietnia 2025
Rollei

Rollei HD-30 Instrukcja

29 Marca 2025
Rollei

Rollei Security Cam 1080p Instrukcja

29 Marca 2025
Syrp

Syrp Magic Carpet PRO Instrukcja

27 Marca 2025
Aida

Aida HD-NDI-X20 Instrukcja

27 Marca 2025
Hasselblad

Hasselblad CFV II 50c Instrukcja

27 Marca 2025