Instrukcja obsługi Canon Cinema EOS XC10 CFast Kit

Canon kamera Cinema EOS XC10 CFast Kit

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Cinema EOS XC10 CFast Kit (168 stron) w kategorii kamera. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/168

Instruction Manual

PUB. DIE-0469-000

4K Camcorder

MenusTable of Contents Index

Important Usage Instructions

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR

MOISTURE.

To reduce the risk of fire or electric shock, do not expose this apparatus to dripping or splashing, and do not

place objects filled with liquids, such as vases, on the apparatus.

WARNING

TO REDUCE THE RISK OF ELECTRIC SHOCK AND TO REDUCE ANNOYING INTERFERENCE, USE THE

RECOMMENDED ACCESSORIES ONLY.

Unauthorized recording of copyrighted materials may infringe on the rights of copyright owners and be

contrary to copyright laws.

MenusTable of Contents Index

FCC NOTICE

4K Camcorder, XC10 Systems.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of shielded cable is required to comply with class B limits in Subpart B of Part 15 of FCC Rules.

Do not make any changes or modifications to the equipment unless otherwise specified in the manual.

If such changes or modifications should be made, you could be required to stop operation of the

equipment.

Model ID0052 (including WLAN Module Model RF400, FCC ID: AZD400)

This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the

following two conditions: (1) this device may not cause interference, and (2) this device must accept any

interference, including interference that may cause undesired operation of the device.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

The available scientific evidence does not show that any health problems are associated with using low

power wireless devices. There is no proof, however, that these low power wireless devices are absolutely

safe. Low power wireless devices emit low levels of radio frequency energy (RF) in the microwave range

while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-

level RF that does not produce heating effects causes no known adverse health effects. Many studies of

low-level RF exposures have not found any biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not been confirmed by additional research. This model

has been tested and found to comply with FCC/IC radiation exposure limits set forth for an uncontrolled

equipment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio

frequency (RF) Exposure rules.

Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the

passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several

special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on

the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only

while one of the aforementioned packets is being transmitted. In other words, this device automatically

discontinues transmission in case of either absence of information to transmit or operational failure.

Frequency Tolerance: 25 ppm

Canon U.S.A., Inc.

One Canon Park, Melville, NY 11747, USA

Tel No. 1-800-OK-CANON (1-800-652-2666)

The Mains plug is used as the disconnect device. The Mains plug shall remain readily operable to

disconnect the plug in case of an accident.

CA-570 identification plate is located on the bottom.

Specyfikacje produktu

Marka:	Canon
Kategoria:	kamera
Model:	Cinema EOS XC10 CFast Kit
Kolor produktu:	Czarny
Wbudowany wyświetlacz:	Tak
Wysokość produktu:	102 mm
Szerokość produktu:	125 mm
Głębokość produktu:	122 mm
Waga produktu:	930 g
Wyjścia słuchawkowe:	1
Wtyk słuchawek:	3,5 mm
Gniazdko wyjścia DC:	Tak
Typ HD:	Full HD
Pojemność baterii:	1865 mAh
Technologia baterii:	Litowo-jonowa (Li-Ion)
Typ ekranu:	LCD
Rozdzielczość wyświetlacza aparatu:	1030000 px
Długość przekątnej ekranu:	3 "
Obsługiwane typy kart pamięci:	SD
Pojemność pamięci wewnętrznej:	128 GB
Zakres temperatur (eksploatacja):	0 - 40 °C
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b, 802.11g, Wi-Fi 4 (802.11n)
Liczba portów USB 2.0:	1
Kompatybilność 3D:	Nie
Rodzaj baterii:	LP-E6N
Zakres temperatur (przechowywanie):	-5 - 45 °C
HDMI:	Tak
Długość ogniskowa:	8.9 - 89 mm
Pictbridge:	Nie
Obsługa typów dysków:	Nie
Cyfrowe zbliżenie:	- x
Napięcie baterii:	7.2 V
Połączenie USB:	Tak
Czas pracy na zasilaniu akumulatorowym:	- h
Wbudowany mikrofon:	Tak
Typ przetwornika obrazu:	CMOS
Maksymalna rozdzielczość obrazu:	4000 x 3000 px
Stabilizator obrazu:	Tak
Suma megapikseli:	13.36 MP
Maksymalna rozdzielczość filmu:	3840 x 2160 px
Zoom optyczny:	- x
Wielkość filtra:	58 mm
Regulator ostrości:	Automatyczne/Ręczne
Najmniejsza odległość ogniskowa:	0.5 m
Procesor zdjęć:	DIGIC DV V
Balans bieli:	Automatyczna
Czułość ISO:	160,20000
Min. Oświetlenie:	0.05 lx
Powiekszenie:	10 x
Wielkość czujnika CCD:	- "
Maksymalna przesłona:	5.6
Szybkość migawki:	1/2 - 1/2000 s
Minimalna przesłona:	2.8
Megapiksele efektywne (film):	8.29 MP
Rodzaj kamery:	Ręczna
Rodzaj taśmy kamery wideo:	Nie
Typ nośnika kamery:	Karta pamięci
Megapiksele efektywne (zdjęcie):	12 MP
Liczba elementów przysłony:	8
Dźwięk cyfrowy pcm:	16-bit/48 kHz