Instrukcja obsługi Cannondale Six13

Cannondale Rower E-rower Six13

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cannondale Six13 (2 stron) w kategorii Rower E-rower. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
CANNONDALE USA (CUSA)
Cannondale Bicycle Corporation
172 Friendship Road
Bedford, Pennsylvania 15522
(Voice): 1-800-BIKEUSA
(Fax): 814-623-6173
custserv@cannondale.com
URL: http//www.cannondale.com
CANNONDALE AUSTRALIA (CA)
Unit 6, 4 Prosperity Parade
Warriewood N.S.W 2102
Australia
Phone(02)9979 5851
Fax(02)9979 5688
cannondaleaustralia@cannondale.com
CANNONDALE JAPAN (CJ)
12-5 Harayamadai
5-cho Sakai City
Osaka, Japan 590-0132
(Voice): 011.81.722.99.9399
(Fax): 0722-93-6166
cjcustserv@cannondale.com
CANNONDALE EUROPE (CE)
mail: Postbus 5100
visits: Hanzepoort 27
7570 GC Oldenzaal
Netherlands
(Voice): +31 541 573580
(Fax): 31-5415-14240
servicedeskeurope@cannondale.com
This document online at: http://www.cannondale.com/bikes/tech/
Please note that information is subject to change without notice.
© 2004 Cannondale Bicycle Corporation - All Rights Reserved
5/04
Six13 High Peformance
Road Frames
Publication Title: Publication No.
XXXXXX.PDF
Page 1 of 2
116832.PDF
Owner’s Manual Supplement
CONGRATULATIONS & THANK YOU
Thank you for your purchase of a Cannondale Six13 road bike.
We manufacture Six13s by hand in our Bedford, Pennsylvania
(USA) factory. This Owner’s Manual Supplement includes
important safety and technical information for your Six13.
WARRANTY
Your Six13 is covered by the Cannondale Limited Warranty found
in your Cannondale Bicycle Owner’s Manual. Please read that
manual for complete bicycle safety information and warranty
details.
COMPATIBILITY
Seat post Diameter 27.2mm
Headset Cannondale System Integration (Si),
Campagnolo Hiddenset™ bearings
Bottom Bracket OPTION 1 - Cannondale System
Integration (Si)
OPTION 2 - Threaded English, 68mm
Front Dropout
Spacing,
100mm
Rear Dropout
Spacing
130 mm
Front Derailleur 31.8mm diameter clamp-on
Stem/fork 1 1/8” diameter headset style
CLEANING
When cleaning your Six13, use only a mild soap and water
solution. Wipe off road film with a clean soapy towel. Rinse
with clean water and wipe dry. Never power wash your bike.
Avoid spraying water directly at frame openings (bottom
bracket, water bottle rivnuts, seat tube opening, head tube
seals).
ABOUT REPAINTING OR REFINISHING
Painting over the existing finish, refinishing and repainting
your Six13 should not be done. The aluminum and carbon fiber
composites making up the frame are held together by some
extremely strong bonding chemicals. However, these bonds can
be attacked or weakened by refinishing chemicals or abrasives.
WARNING
Repainting, paint over, retouch, or refinishing your Six13
frame or fork can result in severe damage leading to an
accident. You can be severe injured, paralyzed or killed.
Refinishing chemicals : Solvents, and strippers can attack,
weaken, or destroy the important composite “chemical “
bonds holding your Six13 frame together.
Abrasives or sanding the frame/fork structure, original
paint, decals, or coatings through the use of mechanical
actions such as plastic or glass bead blasting or other
abrasive methods such as sanding or scraping can remove
frame material or weaken it.
HEAD TUBE BADGES
The Head tube badges on your Six13 cover the ports used in the
manufacturing process. The badges are bonded in place. They
will remain in place under normal conditions, and should not be
taken off.
If the badges become damaged or detached from the head tube,
please have your bike inspected and the badges replaced by
your Cannondale Dealer.
UPPER BADGE
LOWER BADGE
English
Page 2 of 2
STORAGE
Drain Out Water
Water can enter through washing, condensation, wet rides, or
rain. It penetrates through water bottle bosses, seat tube, head
tube and seat post openings.
Water will not chemically harm your Six13. If it freezes, the ice
expansion can burst or crack the frame making it unsafe to ride.
This damage also NOT covered under your warranty.
Water in the bottom bracket shell drains through a small hole
in the center of the bottom bracket cable guide. Keep drain
clear. Wiggle the end of a bread tie inside the hole to dislodge
any dirt. Don’t use any sharp or pointed tools and don’t try to
enlarge this hole. DO NOT ENLARGE HOLE.
PROTECT FROM TEMPERATURE EXTREMES
• Protect your Six13 from temperature extremes when
storing or transporting it.
• Allow your Six13 to cool off or warm up before you ride
• Do not store your Six13 in places where the temperatures
will rise above 66.5C° (150°F). For example, do not leave your
Six13 lying flat in a black pickup truck bed in the desert sun,
0r, under the glass of a hatchback auto.
INSPECTING FOR CRASH OR FATIGUE
DAMAGE
WARNING
AFTER A CRASH OR IMPACT:
Inspect frame carefully for damage. Do not ride your Six13
if you see any sign of damage, such as broken, splintered,
or delaminated carbon fiber. A delamination or break
in the adhesive bonds between aluminum and carbon
components may be present if the following are present:
an unusual or strange feel to the frame such as carbon
tubes which have a soft feel or altered shape, creaking or
other unexplained noises, visible cracks, a white or milky
color present in carbon fiber section.
Continuing to ride a damaged frame increases the chances
of frame failure, with the possibility of injury or death of
the rider.
SEAT TUBE & SEAT POST
(A) Seat post maximum insert
depth**
200 mm
** Six13 frames are designed and manufactured for a maximum
seat tube insertion of 200mm. Below this level, bond materials
inside the carbon section of tube could offer a slight resistance
to a seat post inserted more than 200 mm.
Make sure the inside of the seat tube is clean.
Follow the seat post manufacturer’s instructions for installing,
lubricating, or not lubricating and securing the seat post.
However, USE ONLY GREASE. See the important warnings below.
WARNING
NEVER USE LIGHT OR SPRAY OILS TO LUBRICATE A SEAT
POST OR INSIDE THE SEAT TUBE. A light film of clean
bicycle bearing grease can be used if directed (seat post
manufacturer’s instructions).
NEVER USE SOLVENTS, OR CHEMICAL SPRAY CLEANERS TO
CLEAN THE INSIDE OF THE SEAT TUBE. Wipe out the seat
tube with a clean dry towel only.
Light oils (WD40 and oils typically used in honing) and
solvents, and including chemical cleaners can attack and
weaken composite bonds holding the frame together
leading to frame failure.
NEVER FORCE A SEAT POST INTO THE SEAT TUBE. The seat
post should be a slide fit always. If the seat post is difficult
to install, there is a serious problem or the seat post
extends more than 200 mm into the seat tube.
NEVER REAM OR HONE THE SEAT TUBE FOR ANY REASON.
Always have the seat post serviced and installed by a
professional bike technician.
Owner’s Manual Supplement
ALUMINUM
CARBON
A
English - 116832.PDF

Specyfikacje produktu

Marka: Cannondale
Kategoria: Rower E-rower
Model: Six13

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cannondale Six13, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Rower E-rower Cannondale

Cannondale

Cannondale SuperSix Evo Neo Instrukcja

11 Marca 2025
Cannondale

Cannondale e-Bikes 2020 - Supplement Instrukcja

5 Marca 2025
Cannondale

Cannondale Silkroad Instrukcja

3 Marca 2025
Cannondale

Cannondale E-Series 2019 Instrukcja

6 Lutego 2025
Cannondale

Cannondale Slice RS Instrukcja

4 Lutego 2025
Cannondale

Cannondale Six13 Instrukcja

4 Lutego 2025
Cannondale

Cannondale Slice Multisport Instrukcja

2 Lutego 2025
Cannondale

Cannondale Contro-E Speed Instrukcja

1 Lutego 2025
Cannondale

Cannondale CY22 SmartSense Instrukcja

1 Lutego 2025
Cannondale

Cannondale Slice Aero Instrukcja

31 Stycznia 2025

Instrukcje Rower E-rower

Najnowsze instrukcje dla Rower E-rower

Swyff

Swyff Display C-14F Instrukcja

24 Marca 2025
Jolex

Jolex Ebikes Instrukcja

24 Marca 2025
Ebike20

Ebike20 K-LCD display Instrukcja

22 Marca 2025
Dutch ID

Dutch ID Tour Instrukcja

22 Marca 2025
Cube

Cube Aerium 2021 Instrukcja

22 Marca 2025
Keola

Keola Brabant - LongLife EW Instrukcja

22 Marca 2025
Apache

Apache E-Bikes 2020 Instrukcja

20 Marca 2025
Keola

Keola Utrecht Instrukcja

20 Marca 2025
Cube

Cube Lighting Set PRO25 Instrukcja

19 Marca 2025
Victesse

Victesse Middenmotor Instrukcja

18 Marca 2025