Instrukcja obsługi Candy PVI 640 N
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Candy PVI 640 N (32 stron) w kategorii piec. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/32
INSTALLATIE- EN GEBRUIKSINDTRUCTIES
INDUCTIEKOOKPLAAT NL
INSTALLATIONS- UND BEDIENUNGSANLEITUNG
CERANFELDER DE
ES
INSTRUCTIONS FOR USE AND INSTALLATION
INDUCTION HOBS GB
CANDY ELETTRODOMESTICI - Via Privata Eden Fumagalli - 20047 Brugherio Milano Italy
FR
NOTICE D'EMPLOI ET D'INSTALLATION
TABLE À INDUCTION
1 GB
READ THE INSTRUCTIONS BOOKLET CAREFULLY TO MAKE THE MOST OF YOUR HOB.
We recommend you keep the instructions for installation and use for later reference, and before installing the hob, note its serial number
below in case you need to get help from the after sales service.
We are constantly striving to improve product quality and as such may modify appliances to incorporate the latest technical improvements.
Glass Ceramic Hobs conform to directives 73/23/CEE and 89/336/CEE.
Identification plate
(located under the hob's bottom casing)
• It is strongly recommended to keep children away from the cooking zones while they are in operation or when they are switched off,
so long as the residual heat indicator is on, in order to prevent the risks of serious burns.
• When cooking with fats or oils, take care always to watch the cooking process as heated fats and oils can catch fire rapidly.
• The hob’s control area is sensitive, do not place hot containers on it.
• Aluminium foil and plastic pans must not be placed on heating zones.
• After every use, some cleaning of the hob is necessary to prevent the build up of dirt and grease. If left, this is recooked when the
hob is used and burns giving off smoke and unpleasant smells, not to mention the risks of fire propagation.
• Do not left metallic objects such as knives, forks, spoons or lids on the induction zone,because if they are too large or too heavy, they
could become hot
• Never cook food directly on the glass ceramic hob. Always use the appropriate cookware.
• Always place the pan in the centre of the unit that you are cooking on.
• Do not use the surface as a cutting board.
• Do not slide cookware across the hob.
• Do not store heavy items above the hob. If they drop onto the hob, they may cause damage.
• Do not use the hob as a working surface.
• Do not use the hob for storage of any items.
• In the unlikely event of a surface crack appearing, do not use the hob. Immediately disconnect the hob from the electrical power supply
and call the After Sales Service.
GENERAL WARNINGS
This appliance complies with current safety regulations and electromagnetic compatibility regulations.
Nevertheless, people with a should not use this appliance. It is impossible to guarantee that all such devices foundpacemaker
on the market comply with current safety regulations and electromagnetic compatibilityregulations, and that dangerous interference
will not occur. It is also possible that people with other types of device, such as a hearing aid, could experience some discomfort.
COOKING HOB
Burners
Supply voltage (V/Hz)
Installed electric powe (W)
Product size (w x d x h) mm.
Building-in dimensions (AxB)
3 INDUCTION 4 INDUCTION 2 INDUCTION 4 INDUCTION
2 CERAMIC
220 - 240 V
50/60 Hz
220 - 240 V
50/60 Hz
220 - 240 V
50/60 Hz
220 - 240 V
50/60 Hz
Installing a domestic appliance can be a complicated operation which if not carried out correctly, can seriously affect consumer
safety. It is for this reason that the task should be undertaken by a professionally qualified person who will carry it out in
accordance with the technical regulations in force. In the event that this advice is ignored and the installation is carried out
by an unqualified person, the manufacturer declines all responsibility for any technical failure of the product whether or not
it results in damage to goods or injury to individuals.
2 GB
BUILT-IN
The furniture in which your hob will be installed and all adjacent
furniture, should be made from materials that can withstand high
temperatures. In addition, all decorative laminates should be fixed
with heat-resistant glue.
Installation:
• A watertight seal is supplied with the hob.
Before fitting:
- turn the hob upside down, with the glass surface facing downwards.
Make sure the glass is protected.
- fit the seal round the hob.
- make sure that it is correctly fitted to avoid any leakage into the
supporting cabinet.
• It is important to fit the hob on a level supporting surface.
• Deformations caused by incorrect fitting can alter the specifications
of the worktop and the performance of the hob.
• Leave a gap of at least 5 cm between the appliance and any
neighbouring vertical surfaces.
• It is absolutely essential that the recess conforms with the
dimensions indicated.
• The height of the flush-mounted part of the hob is 5,5 cm.
• If there is an intermediate division :
- the clearance between the bottom of the casing and an
intermediate floor or part of a furniture unit must greater than
2,5 cm so as to allow air circulate.
The minimum distance should be 8 cm.
- furthermore, you should ensure that there is at the rear a
ventilation (8 cm) on all the width.
• You can not build the hob in above an oven with no fan, a
dishwasher, fridge, freezer or washing machine.
• The body of the hob is fitted which 4 location holes to take the
fixing clamps intended to fix the hob in the unit. Place the 4 fixing
clamps, before building-in the hob, in such a way that the hob
is placed perfectly in the support unit.
INSTALLATION
"The installation must conform to the standard directives."
The manufacturer declines all responsibility for any damage that
may be caused by unsuitable or unreasonable use.
Warning :
• Always check before any electrical operation, the supply tension
shown on the electricity meter, the adjustment of the circuit-
breaker, the continuity of the connection to earth to the installation
and that the fuse is suitable.
• The electrical connection to the installation should be made via
a socket with a plug with earth, or via an omnipole cut-out switch
with an opening gap of at least 3 mm.
If the appliance has a socket outlet, it must be installed so that
the socket outlet is accessible.
• The yellow/green wire of the power supply cable must be
connected to the earth of both power supply and appliance
terminals.
• The manufacturer cannot be held responsible for any accidents
resulting from the use of an appliance which is not connected
to earth, or with a faulty earth connection continuity.
• Any queries regarding the power supply cord should be referred
to After Sales Service or a qualified technician.
ELECTRICAL CONNECTION
Seal
Hob
25 mm
mini
50 mm
Opening
500 X 50
Opening
500 X 10
It is however possible to connect the hob to :
. Three phase 220-240 V3~
. Three phase 380-415 V3N~
To proceed to the new connection, you must adhere the
following instructions.
• Before making the connection, make sure that the installation
is protected by a suitable fuse, see table, and that it is fitted with
wires of a large enough section to supply the appliance normally.
• Connect to a socket, to choose the correct fuse, you must
refer on the table.
The hob is fitted with a power supply cord which allows it to be
connected only to a power supply of 220-240 V between phases
or between phase and neutral.
CONNECTION TO THE TERMINALS ON THE TERMINAL BLOCK:
Operations to be carried out on the existing connection :
• Turn over the hob, glass side against the work top, taking care
to protect the glass.
• Open the cover.
• remove the screws retaining the terminal block which contains
the shunt bars and the conductors of the supply cord,
• unscrew the cable clamp to release the power supplying cord.
• Pull out the supply cord.
• Operations to be carried out to make a new connection :
- Choose the power supply cable in accordance with the
recommendations in the table.
- Pass the power supply cable into the clamp.
- Strip the end of each conductor of the supply cord on a 10 mm
length, by taking in account the requested length of the cord for
the connection to the terminal block.
- According to the installation and with the help of shunt bars
which you should have recovered in the first operation, fix the
conductor as shown on the chart.
- Screw the cable clamp and fix the cover.
Note: make sure the terminal board screws are tight.
FOR PMI 640 MODEL
Specyfikacje produktu
| Marka: | Candy |
| Kategoria: | piec |
| Model: | PVI 640 N |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Candy PVI 640 N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje piec Candy
28 Maja 2024
28 Maja 2024
27 Maja 2024
27 Maja 2024
26 Maja 2024
24 Maja 2024
22 Maja 2024
21 Maja 2024
20 Maja 2024
20 Maja 2024
Instrukcje piec
- piec Bauknecht
- piec Ikea
- piec Samsung
- piec Bertazzoni
- piec Electrolux
- piec DeLonghi
- piec AEG
- piec Balay
- piec Beko
- piec Teka
- piec LG
- piec Küppersbusch
- piec Smeg
- piec Götze & Jensen
- piec Gram
- piec Amica
- piec Gorenje
- piec Etna
- piec LERAN
- piec Cookology
- piec Russell Hobbs
- piec Tefal
- piec Livoo
- piec SilverCrest
- piec Dometic
- piec Bosch
- piec Xblitz
- piec Whirlpool
- piec Miele
- piec Brentwood
- piec Midea
- piec Lamona
- piec Severin
- piec Panasonic
- piec Liebherr
- piec Baumatic
- piec OK
- piec Hoover
- piec Westinghouse
- piec Rinnai
- piec Hendi
- piec Domo
- piec GE
- piec ILive
- piec Ardes
- piec Taurus
- piec Orbegozo
- piec Blaupunkt
- piec Brandt
- piec Vivax
- piec Siemens
- piec Danby
- piec Grundig
- piec Haier
- piec KKT Kolbe
- piec Cylinda
- piec Jocel
- piec Hyundai
- piec Silverline
- piec Blomberg
- piec Bimar
- piec Husqvarna
- piec Concept
- piec Fisher & Paykel
- piec ECG
- piec Indesit
- piec Matsui
- piec Ilve
- piec Unold
- piec Viking
- piec Nodor
- piec CATA
- piec Hotpoint
- piec Kenwood
- piec V-Zug
- piec Ariston Thermo
- piec 70mai
- piec Mestic
- piec PKM
- piec Cuisinart
- piec Wilfa
- piec Thor
- piec Amana
- piec Dacor
- piec Hotpoint Ariston
- piec Meireles
- piec Melissa
- piec Schneider
- piec Thetford
- piec MPM
- piec OneConcept
- piec CDA
- piec Philco
- piec Neff
- piec Corbero
- piec Zanussi
- piec Ravanson
- piec Thermex
- piec Fagor
- piec Koenic
- piec Thomson
- piec Bröhn
- piec Izzy
- piec Klarstein
- piec Artusi
- piec KitchenAid
- piec Steba
- piec Mastercook
- piec TriStar
- piec Landmann
- piec Exquisit
- piec Bartscher
- piec Privileg
- piec Dimplex
- piec Falmec
- piec Arçelik
- piec Hanseatic
- piec Continental Edison
- piec Atag
- piec Rosieres
- piec Franke
- piec G3 Ferrari
- piec Hamilton Beach
- piec Novy
- piec Inventum
- piec SVAN
- piec Euro Appliances
- piec Waring Commercial
- piec Mora
- piec Caple
- piec AEG-Electrolux
- piec Omega
- piec Bush
- piec Kenmore
- piec Kaiser
- piec BORA
- piec VOX
- piec Pelgrim
- piec Benavent
- piec Orima
- piec Rex
- piec Kernau
- piec Technika
- piec JennAir
- piec Frigidaire
- piec RCA
- piec Summit
- piec Gemini
- piec Foster
- piec Chef
- piec Rommelsbacher
- piec Fulgor Milano
- piec Kelvinator
- piec Gaggenau
- piec Sencor
- piec Avanti
- piec Asko
- piec Altus
- piec Esatto
- piec Signature
- piec Capital
- piec BlueStar
- piec Becken
- piec Scandomestic
- piec Guzzanti
- piec Steel
- piec Aroma
- piec Edilkamin
- piec Campart
- piec Belling
- piec De Dietrich
- piec ZLine
- piec Cotech
- piec Campingaz
- piec Magic Chef
- piec Eurom
- piec Clas Ohlson
- piec Arctic Cooling
- piec Sauber
- piec Smith&Brown
- piec Sogo
- piec Crosley
- piec Nutrichef
- piec Constructa
- piec Proline
- piec Euromaid
- piec BLANCO
- piec Emax
- piec Thermador
- piec Finlux
- piec Bestron
- piec VIOFO
- piec Optimum
- piec Rotel
- piec Atlas
- piec Kluge
- piec Arthur Martin
- piec Logik
- piec Profilo
- piec Eldom
- piec Leisure
- piec Glem Gas
- piec Proctor Silex
- piec Creda
- piec Cadac
- piec Waves
- piec ARC
- piec Orava
Najnowsze instrukcje dla piec
28 Października 2024
28 Października 2024
28 Października 2024
28 Października 2024
27 Października 2024
21 Października 2024
12 Października 2024
11 Października 2024
11 Października 2024
9 Października 2024