Instrukcja obsługi Cameo TS 100 WW

Cameo Niesklasyfikowane TS 100 WW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cameo TS 100 WW (64 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/64
TS 100 WW
THEATER SPOT WITH 100W WW LED
CLTS100WW
USER´S MANUAL
BEDIENUNGSANLEITUNG
MANUEL D`UTILISATION
MANUAL DE USUARIO
INSTRUKCJA OBSŁUGI
MANUALE D‘ USO
TS 200 WW
THEATER SPOT WITH 180W WW LED
CLTS200WW
CONTENTS / INHALTSVERZEICHNIS / CONTENU / CONTENIDO / TREŚĆ / CONTENUTO
ENGLISH
PREVENTIVE MEASURES 3-4
INTRODUCTION 4
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS 5-6
OPERATION 6-8
INSTALLATION 9
INSTALLATION/REMOVAL OF BARN DOORS AND
FILTER FRAME 9
DMX TECHNOLOGY 10
TECHNICAL DATA 11
MANUFACTURER’S DECLARATIONS 11-12
DMX CONTROL 63
DEUTSCH
SICHERHEITSHINWEISE 13-14
EINFÜHRUNG 14
ANSCHLÜSSE, BEDIEN- UND ANZEIGEELEMENTE 15-16
BEDIENUNG 16-18
AUFSTELLUNG UND MONTAGE 19
FLÜGELBEGRENZER UND FILTERRAHMEN MONTIEREN /
DEMONTIEREN 19
DMX TECHNIK 20
TECHNISCHE DATEN 21
HERSTELLERERKLÄRUNGEN 22
DMX STEUERUNG 63
FRANCAIS
MESURES PRÉVENTIVES 23-24
INTRODUCTION 24
RACCORDEMENTS, ÉLÉMENTS DE COMMANDE ET
D’AFFICHAGE 25-26
MODE D’EMPLOI 26-28
INSTALLATION ET MONTAGE 29
MONTAGE / DÉMONTAGE DU VOLET COUPE-FLUX ET
DU CADRE POUR FILTRE 29
TECHNOLOGIE DMX 30
CARACTÉRISTIQUES TECHNIQUES 31
DÉCLARATIONS DU FABRICANT 32
PILOTAGE EN MODE DMX 63
ESPAÑOL
MEDIDAS DE SEGURIDAD 33-34
INTRODUCCIÓN 34
CONEXIONES, MANDOS Y ELEMENTOS DE VISUALIZACIÓN 35-36
FUNCIONAMIENTO 36-38
INSTALACIÓN Y MONTAJE 39
MONTAJE Y DESMONTAJE DE LA VISERA Y EL
PORTAFILTROS 39
TECNOLOGÍA DMX 40
DATOS TÉCNICOS 41
DECLARACIONES DEL FABRICANTE 42
CONTROL DMX 63
POLSKI
ŚRODKI OSTROŻNOŚCI 43-44
WPROWADZENIE 44-45
GNIAZDA, ELEMENTY OBSŁUGI I WSKAŹNIKI 45-46
OBSŁUGA 46-48
USTAWIANIE I MONTAŻ 49
MONTAŻ/ DEMONTAŻ KLAP OGRANICZAJĄCYCH POLE
ŚWIECENIA ORAZ RAMKI FILTRA 49
TECHNIKA DMX 50
DANE TECHNICZNE 51
OŚWIADCZENIA PRODUCENTA 52
STEROWANIE DMX 63
ITALIANO
MISURE PRECAUZIONALI 53-54
INTRODUZIONE 54
RACCORDI, ELEMENTI DI COMANDO E DI VISUALIZZAZIONE 55-56
UTILIZZO 56-58
INSTALLAZIONE E MONTAGGIO 59
MONTAGGIO E SMONTAGGIO DEL DEFLETTORE AD ALETTE E DEL
TELAIO PORTAFILTRO 59
TECNOLOGIA DMX 60
DATI TECNICI 61
DICHIARAZIONI DEL PRODUTTORE 62
CONTROLLO DMX 63
3
DMX DEUTSCHFRANCAISESPAÑOL ENGLISHITALIANO POLSKI
ENGLISH
YOU‘VE MADE THE RIGHT CHOICE!
We have designed this product to operate reliably over many years. Please read this User‘s Manual carefully, so that you can begin making
optimum use of your Cameo Light product quickly. Learn more about Cameo Light on our website WWW. .COM.CAMEOLIGHT
PREVENTIVE MEASURES
1. Please read these instructions carefully.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information from the equipment.
5. Use the equipment only in the intended manner and for the intended purpose.
6. Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and
secured. Make certain that the equipment is installed securely and cannot fall down.
7. During installation, observ e the applicable safety regulations for your country.
8. Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is
always installed so that is cooled sufficiently and cannot overheat.
9. Never place sources of ignition, e.g., burning candles, on the equipment.
10. Ventilation slits must not be blocked.
11. This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply
to special outdoor equipment - in this case, observe the special instructions noted below). Do not expose this equipment to flammable
materials, fluids or gases.
12. Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or
drinking vessels, on the equipment.
13. Make certain that objects cannot fall into the device.
14. Use this equipment only with the accessories recommended and intended by the manufacturer.
15. Do not open or modify this equipment.
16. After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
17. During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
18. If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in
anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired
by authorized, qualified personnel.
19. Clean the equipment using a dry cloth.
20. Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
21. Plastic bags must be kept out of reach of children.
FOR EQUIPMENT THAT CONNECTS TO THE POWER MAINS:
22. CAUTION: If the power cord of the device is equipped with an earthing contact, then it must be connected to an outlet with a protective
ground. Never deactivate the protective ground of a power cord.
23. If the equipment has been exposed to strong fluctuations in temperature (for example, after transport), do not switch it on immediately.
Moisture and condensation could damage the equipment. Do not switch on the equipment until it has reached room temperature.
24. Before connecting the equipment to the power outlet, first verify that the mains voltage and frequency match the values specified on the
equipment. If the equipment has a voltage selection switch, connect the equipment to the power outlet only if the equipment values and the
mains power values match. If the included power cord or power adapter does not fit in your wall outlet, contact your electrician.
25. Do not step on the power cord. Make certain that the power cable does not become kinked, especially at the mains outlet and/or power
adapter and the equipment connector.
26. When connecting the equipment, make certain that the power cord or power adapter is always freely accessible. Always disconnect the
equipment from the power supply if the equipment is not in use or if you want to clean the equipment. Always unplug the power cord and
power adapter from the power outlet at the plug or adapter and not by pulling on the cord. Never touch the power cord and power adapter
with wet hands.
27. Whenever possible, avoid switching the equipment on and off in quick succession because otherwise this can shorten the useful life of
the equipment.
28. IMPORTANT INFORMATION: Replace fuses only with fuses of the same type and rating. If a fuse blows repeatedly, please contact an
authorised service centre.
29. To disconnect the equipment from the power mains completely, unplug the power cord or power adapter from the power outlet.
30. If your device is equipped with a Volex power connector, the mating Volex equipment connector must be unlocked before it can be re-
moved. However, this also means that the equipment can slide and fall down if the power cable is pulled, which can lead to personal injuries
and/or other damage. For this reason, always be careful when laying cables.
31. Unplug the power cord and power adapter from the power outlet if there is a risk of a lightning strike or before extended periods of disuse.
32. The device must only be installed in a voltage-free condition (disconnect the mains plug from the mains).
33. Dust and other debris inside the unit may cause damage. The unit should be regularly serviced or cleaned (no guarantee) depending on
ambient conditions (dust etc., nicotine, fog) by qualified personnel to prevent overheating and malfunction.
34. Please keep a distance of at least 0.5 m to any combustible materials.
35. Power cables to power multiple devices must have a cross-section of at least 1.5 mm². Within the EU, the cables must correspond to
H05VV-F, or similar. Suitable cables are offered by Adam Hall. With these cables, you can connect multiple devices via the power OUT con-
nection to the power IN connection of an additional device. Make sure that the total current consumption of all connected devices does not
exceed the specified value on all connected devices (label on the device). Make sure to keep power cable connections as short as possible.

Specyfikacje produktu

Marka: Cameo
Kategoria: Niesklasyfikowane
Model: TS 100 WW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cameo TS 100 WW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Cameo

Cameo

Cameo SB8.3 Instrukcja

24 Września 2024
Cameo

Cameo TS 100 WW Instrukcja

19 Września 2024
Cameo

Cameo CLFDJ5L Instrukcja

11 Września 2024
Cameo

Cameo CLFDJ10L Instrukcja

9 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024